DISCHARGE HOSE 6 M FOR PW115C/PW125C 68500060-6
- 6m delivery hose for PW115C/PW125C washers 68500060-6 - heavy-duty, flexible high-pressure hose with dedicated connectors. Ideal for washing your car, driveway and patio.
6 M HOSE FOR PW115C/PW125C 68500060-6 - reliable high-pressure hose for PW 115C and PW 125C washers
6m delivery hose for PW115C/PW125C 68500060-6 is a high-quality high-pressure hose designed for use with PW 115C and PW 125C pressure washers. Provides safe and efficient transfer of high-pressure water from the washer to the working lance, enabling comfortable and thorough cleaning of various surfaces around the house, in the garage, workshop or small service business.
The delivery hose is suitable for the following washers: PW 115C; PW 125C
In practice, this means that by choosing this particular hose model, you are assured of full compatibility with the PW 115C and PW 125C - without the need for additional adapters or modifications. The hose is designed to meet the demands of everyday work, maintaining optimal flexibility, strength and resistance to kinking.
What is the 6 m discharge hose for PW115C/PW125C 68500060-6?
The 6m discharge hose for PW115C/PW125C 68500060-6 is a specialized high-pressure hose that is the key connection between the pressure washer and the gun or lance. Water compressed by the device's pump flows through its interior, enabling it to effectively remove dirt, dust and other contaminants from various surfaces. The length of 6 meters provides a convenient working range, without the need to constantly rearrange the washer.
The design of the hose is based on an inner tube resistant to high operating pressure and an outer protective coating, which protects against abrasion, UV radiation and accidental mechanical damage. This makes the hose ideal for both domestic applications and light professional work, such as in service shops, car washes and workshops.
Application, installation and benefits of using the discharge hose for PW 115C and PW 125C washers
The 6m delivery hose for PW115C/PW125C 68500060-6 is designed for convenient, fast and safe operation with PW 115C and PW 125C pressure washers. Its primary task is to bring high-pressure water from the washer's output to the trigger gun and then to the lance or other working tip. The integrated connectors allow for intuitive installation - just plug the hose ends into the appropriate slots on the washer and gun until they noticeably snap into place.
In practice, the hose is used in many everyday situations, such as:
- washing of cars, motorcycles, quads and bicycles,
- cleaning of paving stones, driveways, terraces and sidewalks,
- washing mud and sand from garden machinery, wheelbarrows, tools or construction equipment,
- maintenance of facades, fences, gates, external blinds,
- cleaning work around the house, on the plot, on farms and small service companies.
Hose installation is quick and hassle-free - no specialized tools required. Appropriately sized terminals ensure tight connections and minimize the risk of unsealing even during high-pressure operation. This allows the user to focus solely on effective cleaning, without worrying about a sudden drop in pressure or water leakage.
6 m delivery hose for PW 115C / PW 125C washers - durability, mobility and operational safety
One of the most important advantages of the 6 m discharge hose for PW115C/PW125C 68500060-6 is its increased durability. Made of high quality materials, the cable is resistant to abrasion, bending, and accidental stepping on or running over by the wheel of the cart. The thick outer shell protects the inner layer, which is responsible for maintaining the required operating pressure and user safety.
Length of 6 meters gives a very good compromise between freedom of movement and ease of storage. The hose is long enough to wash most parts of your car, driveway or patio without moving the machine, yet compact enough to be easily rolled up and put away on a hook, drum or shelf in the garage when you're done. Flexible design reduces the risk of permanent kinks that could disrupt water flow.
The safety of working with a pressure washer depends largely on the quality of the hose. Robust inner walls and tight joints minimize the risk of sudden rupture and uncontrolled splashing of high-pressure water. This is especially important when working near electrical installations, delicate body parts or facades, and in areas where other people are present.
Parameters and key features of the 6 m discharge hose 68500060-6 - why you should choose this model?
When you choose the 6m delivery hose for PW115C/PW125C 68500060-6, you are investing in an accessory perfectly suited to your washer. Compatibility with specific models of PW 115C and PW 125C guarantees correct operation of the device and full use of its capabilities. Suitable inner diameter of the hose and couplings adapted to the design of the washers allow to maintain optimal water flow and stable working pressure.
The most important advantages of the 6 m discharge hose for PW 115C / PW 125C:
- length of 6 m - provides a comfortable working range around the car, building or garden,
- designed for PW 115C and PW 125C washers - full compatibility, no need for adapters,
- robust construction - high resistance to working pressure, abrasion and bending,
- flexibility - easy maneuvering of the hose between obstacles, under the car or around garden furniture,
- safe, leak-proof joints - reducing the risk of leakage and pressure loss,
- easy storage - when rolled up it takes up little space, conveniently put away on the drum or handle.
These features make the hose great for regular use by both individual users and small cleaning companies, service or workshops. A well-chosen accessory translates into longer washer life, higher cleaning efficiency and less time and water consumption.
Examples of the use of the 6 m discharge hose PW115C/PW125C in daily operation
The 6 m discharge hose for PW115C/PW125C 68500060-6 is perfect for typical cleaning jobs carried out by owners of single-family homes, recreational plots or small businesses. Allows you to thoroughly wash your car in your driveway, without having to drive into an automatic car wash. It can be used to quickly remove mud from wheel arches, sludge from rims, as well as stains from oil or operating fluids from the garage floor.
In the garden, the hose will come in handy for refreshing a terrace made of composite boards, washing garden furniture after the winter season or removing moss and algae from paving stones. On farms and in mechanical workshops, it will work well for cleaning machinery, tools and various types of containers. With a length of 6 m, you can move comfortably around the object to be cleaned, and the flexibility of the hose makes it easy to work even in hard-to-reach places.
It is also an ideal choice for those who regularly use a pressure washer and need accessories with improved durability. Replacing an old, worn out or damaged hose with a new model 68500060-6 is a quick way to restore full functionality to your PW 115C or PW 125C washer and increase your working comfort.
FAQ - Frequently asked questions about the 6 m discharge hose for PW115C/PW125C 68500060-6
For which washers the 6 m delivery hose fits 68500060-6?
The hose was designed specifically for use with the PW 115C and PW 125C pressure washers. Provides full compatibility with these models without the need for additional adapters.
What is the length of the hose and is it enough to wash the car?
The length of the hose is 6 meters. This value is fully sufficient to comfortably wash a passenger car, motorcycle or bicycle, as well as for most work around the house - washing the terrace, driveway or fence.
Does hose installation require special tools?
No, the installation of the hose is simple and intuitive. Simply plug the hose ends into the appropriate connectors on the washer and gun. When you hear the click, the connection is ready to work and tight.
How this hose differs from the universal hoses available on the market?
The 68500060-6 model is dedicated to the PW 115C and PW 125C washers, so it perfectly matches the factory connectors and operating parameters of these devices. This ensures stable pressure, no problems with leaks and full use of the power of the washer, which is not always guaranteed by universal hoses.
How to take care of a hose to make it last as long as possible?
When you're done, it's a good idea to drain the pressure from the system, disconnect the hose from the washer and gun, and coil it up loosely. Store it in a dry place, away from intense sunlight and heat sources. Avoid pulling the hose over sharp edges and driving heavy vehicles over it.
Is the hose suitable for professional use?
The 6 m delivery hose for PW115C/PW125C 68500060-6 will be suitable for both domestic applications and light professional work - small cleaning companies, workshops or service shops. If the PW 115C or PW 125C washer is regularly used for service cleaning work, this hose model will be a suitable and durable choice.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.