8 M DELIVERY HOSE FOR PW115C/PW125C 68500060
- High quality 8 m discharge hose 68500060 for PW115C and PW125C pressure washers. Original high-pressure hose - abrasion-resistant, flexible, ensures safe and efficient operation. Ideal for washing cars, terraces and facades.
8 M DELIVERY HOSE FOR PW115C/PW125C 68500060 - PROFESSIONAL PRESSURE WASHER HOSE
What is the 8 m discharge hose for PW115C/PW125C 68500060?
Pressure hose 8 m for PW115C/PW125C 68500060 is a high quality pressure hose designed for use with pressure washers of models PW 115C and PW 125C. This is the component responsible for safely and efficiently delivering high-pressure water from the washer to the lance or spray gun. With a length of 8 meters provides a large working range, allowing you to move freely around the vehicle, building or machinery without having to constantly move the device.
It was made of abrasion- and kink-resistant plastic, which guarantees long life even with intensive daily use. Factory quick-connect couplings and fittings allow quick hose installation and removal, as well as a secure, leak-proof connection to the pressure washer.
Where does the 8m discharge hose for PW115C/PW125C mount 68500060?
The delivery hose is mounted directly between the high-pressure water outlet of the PW 115C or PW 125C washer and the gun or work lance. On one side there is a connection that fits into the high-pressure socket on the washer, on the other - a tip that matches the factory gun of a given model. Installation is usually done without the use of tools, by tightening the connector or snapping the quick-connector, which significantly reduces the time to prepare the equipment for operation.
With appropriately selected ends and seals, the delivery hose ensures full compatibility with the washers:
- PW 115C
- PW 125C
Application of 8 m delivery hose for PW115C/PW125C 68500060
The delivery hose is a key part of the kit of any pressure washer, because it is through it that high-pressure water is transported, which is responsible for the effectiveness of cleaning. The model with a length of 8 m will be ideal for both domestic and semi-professional applications. Typical applications include m.in.:
- washing of cars, vans and motorcycles,
- cleaning of paving stones, terraces and driveways,
- removal of dirt from facades, fences, stairs,
- washing of gardening and construction machinery,
- maintaining cleanliness of garages, workshops and warehouses.
The delivery hose fits the following washers: PW 115C; PW 125C
High-performance 8 m discharge hose for PW 115C / PW 125C washers - durability and reliability for years to come
8m delivery hose for PW115C/PW125C 68500060 is designed for heavy-duty use in demanding conditions. Resistant, multi-layered material provides excellent resistance to the operating pressure generated by the washer, while providing flexibility that makes it easy to maneuver the hose during operation. This gives the user the assurance that the cable will not break or unseal during standard use.
In your daily work, such as washing your car, fence or terrace, you will especially appreciate:
- Abrasion resistance - the hose can be dragged over paving stones, concrete or flagstones without worrying about rapid wear and tear.
- Flexibility - even at lower temperatures, the hose retains sufficient flexibility, making it easy to unwind and rewind.
- Stable operating parameters - constant flow of water under high pressure guarantees repeatable cleaning results.
8 m delivery hose for PW115C/PW125C - comfort of use and greater working range
Hose length is a key parameter affecting the convenience of daily work with the pressure washer. The 68500060 model offers up to 8 meters in length, which, in practice, means that you can freely go around the entire car, trailer or washed part of the facade without having to constantly rearrange the device. This is a huge time and effort saver, especially for larger areas.
Examples of the use of an 8 m hose:
- washing a car parked in the driveway - just set the washer on one side to reach all parts of the body,
- cleaning the terrace or large driveway - you can freely move around the entire surface without restrictions,
- work around the house - washing the fence, stairs or garden furniture without the need for frequent power surges.
Dedicated delivery hose for PW 115C and PW 125C washers - full compatibility and operational safety
The 8m delivery hose code 68500060 was designed specifically for use with pressure washers PW 115C i PW 125C. This means that all connections, diameters and flow parameters are perfectly matched to these models. With this:
- installation is quick and intuitive - no additional adapters or adapters,
- the risk of system leakage is minimized,
- work is carried out in complete safety, in accordance with the assumptions of the manufacturer of the washer.
In practice, this means that the user does not have to worry about selecting the right connectors or technical parameters. Just connect the hose to the washer and the gun and you can start working right away. This is especially important for those who value simplicity of use and reliability of equipment.
Technical specifications - 8 m delivery hose for PW115C/PW125C 68500060
- Purpose: pressure washers PW 115C, PW 125C
- Hose length: 8 m
- Type: high-pressure delivery hose
- Product/outdoor system code: 68500060
- EAN code: 8026619065478
- Color: black
- Purpose of application: transport of high-pressure water from the washer to the lance/pistol
Benefits of replacing the discharge hose with a new original model 68500060
A worn, leaking or cracked delivery hose can cause pressure drops, water leaks and even risk damaging the washer. Replacement with a new, dedicated model brings many tangible benefits:
- Full efficiency of the washer - Optimum working pressure, more effective cleaning and shorter working time.
- User security - no sudden unsealing or "shooting" of the hose during operation.
- Convenience of use - smooth, flexible hose easily unwinds and does not twist, reducing operator fatigue.
If your PW 115C or PW 125C washer is losing power and the hose is showing abrasions or cracks, investing in a new 8 m discharge line 68500060 is one of the easiest and most effective ways to restore its full functionality.
FAQ - Frequently asked questions about the 8 m discharge hose for PW115C/PW125C 68500060
1. Will this hose fit other washer models than PW 115C and PW 125C?
The hose was designed as a dedicated component for the PW 115C and PW 125C models. Using it with other washers may require additional adapters or may not be possible at all. For full compatibility and safety, it is recommended to use it only with the listed models.
2. How to properly connect the hose to the washer?
Connect one end of the hose to the high-pressure outlet on the PW 115C/PW 125C washer, and the other end to the gun or work lance. Make the connection according to the manufacturer's instructions - the most common way is to screw in the connector or snap the quick connect until you feel a "click". Before starting the washer, make sure the connectors are tight.
3. How to take care of a discharge hose to make it last as long as possible?
After finishing work, it is a good idea to empty the hose of water, disconnect it from the washer and store it in a shaded place, away from heat sources and sharp edges. Avoid jerking and kinking the hose violently, and try not to run over it with heavy vehicles during operation. Such simple measures will significantly extend its life.
4. Will the length of 8 meters be enough to wash the car and the terrace?
For typical household applications - washing a car, motorcycle, trailer, terrace or driveway - the length of 8 m is fully sufficient. Often allows you to go around the vehicle without having to move the washer, which translates into more comfortable operation.
5. How to recognize that a hose is suitable for replacement?
The need to replace the hose is indicated by visible cracks, bulges, water leaks and a noticeable drop in pressure during operation. If the hose begins to unseal at the joints or is badly abraded, replace it with a new one as soon as possible to avoid failure of the washer and increase the safety of use.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.