FROTHING LANCE FOR PW 121C/PW 136C/PW 145C/PW 155/PW 170C/PW 175C/PW 190C 68500049
- Foaming lance 68500049 for PW 121C, PW 136C, PW 145C, PW 155, PW 170C, PW 175C, PW 190C washers. Creates thick foam, improves cleaning efficiency and saves chemicals. Ideal for car, terrace, facade.
Foaming lance for PW 121C; PW 136C; PW 145C; PW 155; PW 170C; PW 175C; PW 190C
FROTHING LANCE FOR PW 121C/PW 136C/PW 145C/PW 155/PW 170C/PW 175C/PW 190C 68500049 is a high-quality pressure washer accessory designed to efficiently produce a dense, active foam. Thanks to it, the chemical agent is evenly distributed over the cleaned surface, which increases the effectiveness of cleaning, reduces working time and reduces detergent consumption. The lance will be ideal both in the home workshop and in professional applications in car washes, cleaning companies or industrial plants.
Model code 68500049 is compatible with popular pressure washers: PW 121C, PW 136C, PW 145C, PW 155, PW 170C, PW 175C, PW 190C. It is mounted directly on the output of the washer through a dedicated connection, ensuring a stable and tight connection. The built-in chemical container allows you to conveniently prepare the working solution and apply it in foam form exactly where you need it.
FROTHING LANCE PW 121C-PW 190C 68500049 - CONVENIENT INSTALLATION AND TROUBLE-FREE OPERATION
The frothing lance is designed so that its installation and daily use are possible even for less experienced users. Simply connect it in place of a standard pressure washer lance, fill the tank with the appropriate chemical and set the desired mixing ratio (if the washer provides for such adjustment). The lack of complicated components makes the whole thing intuitive to use and virtually trouble-free.
Examples of application in daily work:
- Washing of a car or van - quick coverage of the car body with active foam before the actual rinsing, which allows to remove most of the dirt without touching it.
- Cleaning of bicycles and motorcycles - gentle foam reaches hard-to-reach places without damaging sensitive components such as bearings or seals.
- Washing of driveways, terraces, facades - foaming of large areas reduces the consumption of chemicals and speeds up the cleaning process, and the even distribution of the agent improves the final result.
Lance housing and chemical container are made of durable plastics resistant to typical detergents used in pressure washers. This translates into long life and reliability even with frequent use.
EFFECTIVE FOAMING AND CHEMICAL SAVINGS - THE BENEFITS OF USING THE PW 121C-PW 190C FOAMING LANCE
The most important role of the foaming lance is to producing a dense, stable foam, which stays on the surface longer and dissolves dirt more effectively. This gives the cleaner more time to react and the user has to do less mechanical work (scrubbing, wiping) to get a perfectly clean result.
Three key features of the 68500049 foaming lance:
- High cleaning efficiency - the foam distributes the detergent much more effectively than a normal water jet, which allows you to remove stubborn dirt such as mud, dust, road salt residues or oil deposits.
- Saving on chemicals - thanks to its thorough foaming and even application, less product is needed to achieve the same effect than in the case of traditional solution spraying.
- Better surface protection - reducing the need for aggressive scrubbing reduces the risk of scratches to car paintwork, protective coatings, wooden terrace elements or delicate facade details.
Daily examples of benefits:
- Regular washing of company vehicle fleets using a foaming lance allows you to maintain a high visual standard with less chemical consumption and shorter vehicle downtime.
- Owners of single-family homes can efficiently clean fences, gates and paving stones, covering them with foam and rinsing them off after a few minutes without the need for time-consuming scrubbing.
- In workshops and garages remove greasy dirt more easily from floors and workstations - foam with degreasing agent effectively dissolves oils and greases.
VERSATILE USE OF THE FOAMING LANCE FOR PW 121C / PW 136C / PW 145C / PW 155 / PW 170C / PW 175C / PW 190C
Thanks to its wide compatibility with pressure washers of the series PW 121C, PW 136C, PW 145C, PW 155, PW 170C, PW 175C, PW 190C, foaming lance is used in many industries and working environments. It is indispensable wherever speed, accuracy and economy of cleaning matter.
Example areas of use:
- Hand and mobile washers - The lance can be used for pre-foaming of cars, vans, construction machinery, agricultural machinery or trucks, which increases the capacity of the service point.
- Cleaning companies - professional teams use the lance for washing warehouses, industrial facilities, multi-storey parking lots or underground garages.
- Agriculture and farming - thanks to foam, it is easier to maintain cleanliness in livestock buildings, on agricultural equipment and in technical rooms, reducing the development of microorganisms and improving hygienic conditions.
Its compact form, low weight and handy shape of the container make the user not get tired even when working for a long time. The materials used are resistant to typical bumps and falls that happen in everyday use.
QUALITY, DURABILITY AND RELIABILITY OF THE FOAMING LANCE 68500049 - AN INVESTMENT FOR YEARS
Selecting foaming lance for PW 121C-PW 190C washers, you are investing in an accessory that is designed for intensive, long-term use. Robust, threaded spigot provides a secure connection to the pressure washer, and leak-proof seals protect against leaks of chemical solution. The container is resistant to typical cleaning agents, reducing the risk of it breaking or becoming cloudy in a short period of time.
Three important strengths of durability and quality:
- Resistance to chemicals - Use of materials selected for contact with active automotive and industrial chemicals minimizes the risk of damage.
- Stable construction - compact, well-balanced container and head with adapter guarantee convenience and safety of use even when the tank is full.
- Faultlessness - the lack of complex moving mechanisms reduces the risk of malfunctions and thus downtime and service costs.
Benefits in daily use:
- No need for frequent replacement of accessories - the lance serves for a long time, reducing operating costs.
- Consistent, repeatable foam quality - the user always gets a predictable cleaning result.
- Greater end customer satisfaction - in both car washes and cleaning service companies, the high quality of the end result translates into positive feedback and returning customers.
TECHNICAL SPECIFICATIONS AND COMPATIBILITY OF THE FOAMING LANCE FOR PW SERIES WASHERS
Technical data (key information for the user):
- Purpose: pW series pressure washers: 121C, 136C, 145C, 155, 170C, 175C, 190C
- Type of accessory: foaming lance with built-in chemical container
- Foam type: active foam (pre-washing, degreasing, basic washing)
- Tank material: durable plastic resistant to detergents
- Color: container white/semi-transparent, head and connection in black
- Manufacturer/System Code: 68500049
- EAN code: 8026619048587
Full compatibility with the listed washer models ensures that there is no need for additional adapters or adapters. This is not only a convenience, but also the certainty of a leak-proof system and the safety of working under pressure.
Practical examples of the use of specifications:
- Washer owner PW 145C can extend its functionality with the possibility of professional foaming without investing in more equipment.
- Washer user PW 190C in the car workshop gets a powerful tool for applying degreasing foam to engines, wheel arches or undercarriages.
- Owner of a domestic washer PW 121C gains an easy way to safely wash paint without the risk of scratches.
FAQ - FREQUENTLY ASKED QUESTIONS ABOUT THE FOAMING LANCE 68500049
1. For which washers the foaming lance fits 68500049?
The lance is designed for pressure washers of the series: PW 121C, PW 136C, PW 145C, PW 155, PW 170C, PW 175C, PW 190C. Thanks to the dedicated connection, no additional adapters are needed.
2. Can I use any chemicals in this lance?
You can use most of the popular agents for pressure washers, especially active foams for washing car bodies, paving stones or facades. However, it is advisable to follow the recommendations of the chemical manufacturer and test new formulations on lower concentrations.
3. How to properly install a foaming lance?
The lance is mounted in place of the standard working lance of the washer. Simply screw or push (depending on the type of connector) the end of the lance into the socket of the washer, make sure the connection is stable, and then fill the tank with the appropriate detergent solution.
4. Does the frothing lance require special maintenance?
After finishing work, it is recommended to empty the tank of chemicals and rinse it with clean water. It's also a good idea to run a few seconds of clean water through the lance to rinse out any residual detergent from the inner channels. Such simple maintenance prolongs the life of the device.
5. Will a foaming lance improve the cleaning effect compared to a regular lance?
Yes, in most applications the effect is noticeably better. The dense foam stays on the surface longer and dissolves dirt, reducing the need for mechanical friction and resulting in a cleaner, more even finish.
6. Can I adjust the intensity of the foam?
The intensity and density of the foam mainly depend on the chemical used, its concentration and the parameters of the pressure washer itself. In many cases, changing the dilution ratio of the detergent allows for a thicker or thinner foam as appropriate.
7. Is the lance suitable for home use?
As much as. Foaming lance 68500049 is suitable for both personal and professional users. At home, it will work well for washing a car, motorcycle, bicycle, patio, paving stones, fences and many other surfaces that require thorough but safe cleaning.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.