ROTOJET LANCE FOR PW 190C/PWX 200C 68500047
- Oleo-Mac Rotojet lance 68500047 for PW 190C and PWX 200C washers. Original turbo rotary nozzle for removing the toughest dirt from pavement, concrete, stone and machinery. Ideal for home and professional use.
ROTOJET LANCE FOR PW 190C/PWX 200C 68500047 is a high-performance lance with rotating (rotary) nozzle designed for high-pressure washers Oleo-Mac PW 190C and PWX 200C. Thanks to the special design of the head, it produces a turbine effect, significantly increasing the working pressure of the water jet and the effectiveness of cleaning even the most stubborn dirt.
Increases efficiency by creating a turbine effect creating the right pressure. All models can use a rotary nozzle for high cleaning performance. Fits the following Oleo-Mac washers: PW 190C; PWX 200C.
What is the Oleo-Mac Rotojet lance 68500047 and how it works?
The Rotojet lance is a specialized working tip for pressure washers, which, instead of the classic steady stream of water, produces a rotating point jet. High-pressure water passes through a rotating nozzle, and the resulting turbine effect concentrates energy in a narrow, rapidly rotating cone. In practice, this means:
- Significantly higher impact force of the jet - dirt and lichen are stripped from the surface, not just rinsed away.
- Deeper cleaning of porous materials - Paving blocks, concrete slabs, stone, exterior plasters.
- Saving time - fewer passes over the same surface, faster completion of work.
As a result, the Rotojet lance will work well wherever a standard fan nozzle proves too weak - especially with perennial deposits, algae buildup, tar, old coats of dirt or construction mud.
Where the Rotojet lance for PW 190C / PWX 200C is mounted?
ROTOJET LANCE FOR PW 190C/PWX 200C 68500047 is a an original Oleo-Mac accessory designed specifically to work with washer models:
- Oleo-Mac PW 190C,
- Oleo-Mac PWX 200C.
The lance is mounted directly on the output of the washer - in place of the standard lance. After disconnecting the factory working lance is enough:
- Screw or plug (depending on the connector system) the Rotojet lance into the washer gun holder.
- Ensure that the connection is stable and the seals fit well.
- Fire up the washer and perform a short test on a small area to select a safe distance.
All connections are factory-fitted to the listed models, so installation is fast, intuitive and requires no additional adapters. This is ideal for users who want to expand the capabilities of their washer with an intensive spot cleaning mode.
ROTOJET LANCE FOR PW 190C/PWX 200C 68500047 - maximum cleaning efficiency for tough dirt
The biggest advantage of the Rotojet lance is its uncompromising efficiency where ordinary tips give up without a fight. Thanks to the rotating high-pressure jet lance:
- Removes old and troublesome tarnish - Many years of dirt on paving stones, oil marks, soot, moss and algae on stone or concrete.
- Deals with dirt after construction and renovation - Mud, mortar residue, cement dust and other external deposits.
- Effectively cleans difficult technical surfaces - machinery, steel structures, farm components and even agricultural equipment (rims, wheel arches, frames).
Examples of applications in daily work:
- Home and Garden: cleaning the paving on the driveway in front of the garage, removing moss from the garden paths, refreshing the terrace made of concrete slabs.
- Workshop and garage: washing floors with difficult oil dirt, cleaning rims and suspension components in the car (with the appropriate distance).
- Farm and Company: refreshing maneuvering yards, driveways for delivery trucks, cleaning elements of fences or working machines.
By concentrating power in a small area, the Rotojet lance allows you to reduce working time and water consumption, which translates directly into lower operating costs and greater user convenience.
Durability, quality and safety of use Oleo-Mac Rotojet 68500047
The lance was designed for long-term, intensive use. Its design features:
- Solid metal tube resistant to high pressure and mechanical impact.
- Precision head with rotating nozzle, made of materials resistant to abrasion by a stream of water with dirt.
- Comfortable plastic handle, which provides a firm grip and good control over the water jet.
Safety of use is key here - the concentrated and swirling stream of water has a very high energy, so:
- You should keep a greater distance from delicate surfaces (e.g., soft wood, painted body parts).
- Always start work from , observing the reaction of the cleaned surface.
- Use work shoes, safety goggles and gloves - especially when working close to the ground.
Thanks to suitable materials and well-thought-out design, the Rotojet lance is a reliable addition to Oleo-Mac washers, raising their capabilities to the level of professional equipment.
Use of the Rotojet lance in Oleo-Mac PW 190C and PWX 200C washers - practical examples
ROTOJET LANTAGE FOR PW 190C/PWX 200C 68500047 will work well for both demanding home users and small service companies. Example application scenarios:
- Washing driveways and sidewalks: instantly get rid of dark stains, tire tarnish, soot from the street, and moss in the cracks of paving stones.
- Preparation of the surface before painting or impregnation: thorough cleaning of concrete fences, retaining walls, walls of outdoor garages, so that new paint coatings adhere better to the substrate.
- Maintain cleanliness of machines and tools: washing of parts of agricultural, construction and gardening machinery, removal of compacted mud, dried soil and other technological dirt.
For the user, this primarily means saving time, energy and chemicals. Often, the jet from the Rotojet lance alone is enough to clean the surface without using additional detergents.
ROTOJET LANCE FOR PW 190C/PWX 200C 68500047 - an investment in greater washer performance
The purchase of a Rotojet lance is a an easy way to significantly increase the functionality of your Oleo-Mac washer. Instead of buying a more powerful device, you can:
- use the full potential of the current washer,
- expand the scope of possible cleaning work,
- reduce the time to complete assignments or work around the house.
This accessory is especially recommended for people who:
- clean large outdoor surfaces - Driveways, yards, floors of sheds and workshops,
- often face tough, old dirt, which cannot be quickly removed with a regular lance,
- expect from the equipment reliability, high durability and a strong working effect.
When you invest in a Rotojet lance, you gain a tool that realistically increases the efficiency of your washer, streamlines daily cleaning tasks and allows you to get professional results without having to order outside cleaning services.
Specifications and fit - Oleo-Mac Rotojet lance for PW 190C / PWX 200C models
Basic product information:
- Name: ROTOJET LANCE FOR PW 190C/PWX 200C
- Manufacturer/Brand: Oleo-Mac
- Purpose: oleo-Mac high-pressure washers PW 190C, PWX 200C
- Tip type: lance with rotating nozzle (rotary, turbo)
- Effect of action: turbine effect, increased jet pressure, high cleaning efficiency
- Product code: 68500047
- EAN code: 8026619048563
Thanks to its original origin and matching mounting system, the lance guarantees full compatibility with the listed models of washers, maintaining their safety parameters and the durability of the high-pressure system.
FAQ - Frequently Asked Questions about ROTOJET LANCE FOR PW 190C/PWX 200C 68500047
1. Does the Rotojet lance fit other washer models than the PW 190C and PWX 200C?
The lance was designed for Oleo-Mac washers PW 190C and PWX 200C. Using it with other models or brands may require additional adapters or may not be possible. For proper and safe operation, it is recommended to use only with the models for which it is dedicated.
2. Is the Rotojet lance suitable for cleaning delicate surfaces?
Due to the the high energy of the concentrated, rotating jet the Rotojet lance is not the first choice for very delicate surfaces, such as soft, unpainted wood, thin plastic parts or some body parts. It can be used carefully, from a greater distance, always making a test on a small part.
3. Can I use cleaning chemicals with the Rotojet lance?
Yes, if the Oleo-Mac PW 190C or PWX 200C washer has a detergent delivery system, the Rotojet lance works with water enriched with cleaning agent. However, in many cases the swirling jet of water itself is so effective that chemistry is not necessary or its amount can be significantly reduced.
4. How to take care of a lance with a rotary nozzle so that it serves as long as possible?
After any prolonged work, it's worth it:
- rinse the lance with clean water,
- remove any debris from around the rotary nozzle,
- store the lance in a dry place, protecting it from mechanical damage.
With regular care, you can maintain full performance of the lance and minimize wear and tear on rotating components.
5. Does the installation of the Rotojet lance require tools?
Not. The lance is designed so that installation is quick and tool-free. Simply detach or unscrew the existing lance and attach the Rotojet lance in its place, making sure that the connection is tight and stable.
6. Why choose an original Oleo-Mac lance rather than a replacement?
Oleo-Mac's original Rotojet lance was precisely matched to the parameters of the PW 190C and PWX 200C washers. It guarantees that:
- secure and tight connection,
- optimal pressure and performance,
- adequate durability of materials,
- compliance with the manufacturer's recommendations for work safety.
Thus, the user is sure to get maximum cleaning efficiency without the risk of equipment damage.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.