15 M HIGH-PRESSURE HOSE 68500026
- High pressure hose 15 m 68500026 - professional hose for pressure washers (PW121C, PW136C, PW145, PW170C, PW175C, PW190C, PW300 HC). Braided, 250 bar, 155°C, 1/4" diameter (DN6) - ideal for washing cars, cubes and facades.
HIGH-PRESSURE HOSE 15 M 68500026 - PROFESSIONAL HOSE FOR PRESSURE WASHERS, EFFICIENT OPERATION UP TO 250 BAR
15 M HIGH-PRESSURE HOSE 68500026 is a professional braided pressure washer delivery hose designed for heavy-duty use in workshops, cleaning companies, farms, as well as domestic applications. Thanks to its high resistance to operating pressure and water temperature, it provides safe, effective and comfortable work for various cleaning tasks.
8 m delivery hose.
Oplot. Maximum operating parameters: up to 250bar; up to 155oC. Diameter 1/4" (DN6).
Fits the following washers: PW121C; PW136C; PW145; PW170C; PW175C; PW190C; PW300 HC
What is the 15 M High Pressure Hose 68500026?
HIGH PRESSURE HOSE 15 M 68500026 is a flexible, braided delivery hose designed for use with high-pressure cleaners. Its design allows for the safe transmission of water at very high pressure - up to 250 bar - and at elevated temperatures, up to 155°C. Thanks to the use of high-quality materials and reinforced braid, the hose retains its flexibility, is resistant to abrasion and to harsh outdoor and industrial environments.
In practice, this means that the hose not only endures demanding long-term use, but also provides the user with full control over the water flow - without the risk of sudden ruptures, leaks or loss of pressure. It is a key piece of equipment for any pressure washer, especially where operator safety and repeatable quality of the cleaning effect are important.
Where the 15 m high-pressure hose is mounted 68500026?
The 15 m high-pressure hose 68500026 is mounted between the high-pressure output of the washer and the gun or work lance. It is an integral part of the pressure system - it is through it that pressurized water is transported to the nozzle and onto the surface to be cleaned.
With appropriately sized connections and a diameter of 1/4" (DN6), the hose provides a stable and leak-proof connection to washers of compatible series, including models: PW121C, PW136C, PW145, PW170C, PW175C, PW190C, PW300 HC. Proper selection of connectors and technical parameters translates into:
- no pressure drops in the working section,
- safe operation with full performance of the device,
- easy assembly and disassembly of the hose without the need for specialized tools.
Examples of installation locations and applications:
- Household washers - Quickly connect the hose to the washer standing in the garage and the gun used in the driveway or garden.
- Car repair shops and car washes - permanent installation of a hose between the central washer and the workstations.
- Agriculture and industry - Hose assembly in washing systems for machinery, vehicles and structural components where high operating parameters are required.
Application of high-pressure hose 15 m 68500026 - practical examples
The long, 15-meter long hose section allows you to significantly increase the working range of the pressure washer without having to move it frequently. This is especially important when cleaning larger areas or objects with complex geometries. The 15 m high-pressure hose 68500026 will prove m.in. in the following applications:
- Vehicle washing - cars, vans, motorcycles, quads. The length of the hose allows you to go around the car without interrupting your work, and the high pressure resistance guarantees effective removal of dirt from the wheel arches and underbody.
- Cleaning of paving stones and terraces - A strong jet of water reaches deep into the pores of the concrete and the joints between the cubes, removing moss, algae and dried mud. The hose allows you to conveniently move around the entire driveway without constantly moving the washer.
- Washing of facades and fences - when working on scaffolding or ladders, the flexibility and length of the hose is important. This model provides freedom of movement and consistent pumping parameters, which translates into even surface cleaning.
- Agricultural and industrial applications - Cleaning of agricultural machinery, trailers, hall interiors, animal stalls, production equipment. Braided construction provides resistance to abrasion, contact with the ground or metal elements.
In its working function, the hose can be used with both cold and hot water (up to 155°C), which opens up possibilities for use in degreasing, removing oil-based dirt or old layers of dirt in workshops and industrial plants.
High-pressure hose 15 m 68500026 - quality, durability and work safety
The key feature of the 15m high-pressure hose 68500026 is its braided construction. Specially selected braid reinforces the structure of the hose, allowing it to carry high working pressure (up to 250 bar) without excessive stretching or deformation. With this:
- the hose maintains a stable cross section and water flow,
- the risk of breakage during operation is minimized,
- the life of the product is much longer compared to cheaper, non-reinforced cables.
In addition, the temperature resistance of up to 155°C allows the hose to be used with heated water washers, which is especially important in professional applications: car washes, workshops, service and industrial plants. High temperature combined with pressure makes it easier to remove greasy, tough dirt, reducing work time and improving results.
For the user, this means concrete benefits:
- Lower operating costs - robust hose requires less frequent replacement, even with heavy use.
- Higher security - Narrower risk of failure resulting in sudden loss of pressure or uncontrolled discharge of water.
- Work comfort - flexibility and appropriately selected diameter (1/4", DN6) make it easy to maneuver the hose even in a confined space.
Compatibility of 15 m high pressure hose 68500026 with PW121C, PW136C, PW145, PW170C, PW175C, PW190C, PW300 HC washers
One of the most important aspects of selecting a high-pressure hose is its compatibility with specific models of washers. The presented hose has been adapted for use with the following washers:
- PW121C
- PW136C
- PW145
- PW170C
- PW175C
- PW190C
- PW300 HC
This gives the user confidence that the product will work properly with the device, maintaining its nominal parameters. In practice, compatibility translates into:
- trouble-free installation - The hose fits the original connections, without the need for adapters,
- full capacity of the washer - The correct flow rate and proper hose diameter prevent pressure drops,
- system security - pressure parameters of the hose are adjusted to the capabilities of the washer's pump.
It is an ideal choice as both replacement original hose, as well as a longer working hose for users who want to improve the operating range of the washer without sacrificing its power and reliability.
The most important advantages from the user's point of view
- Length 15 m - Large working range, no need to constantly move the washer, convenience in large driveways, halls and workshops.
- Braided construction - High durability, resistance to mechanical damage, stable parameters for long-term operation.
- High operating parameters - Up to 250 bar and 155°C, able to work in professional conditions and with demanding dirt.
- Diameter 1/4" (DN6) - Optimum compromise between flexibility and flow capacity, ease of hose routing in tight spaces.
- Compatibility with popular washers - Certainty of fit to listed PW models, no need for installation modifications.
Technical data of the high-pressure hose 15 m 68500026
- Type: discharge hose, high pressure, braided
- Length: 15 m
- Maximum working pressure: up to 250 bar
- Maximum operating temperature: up to 155°C
- Inside diameter: 1/4" (DN6)
- Purpose: high-pressure cleaners
- Compatibility: PW121C, PW136C, PW145, PW170C, PW175C, PW190C, PW300 HC
- Product code: 68500026
FAQ - Frequently asked questions about 15 m high pressure hose 68500026
1. Can I use the 15 m hose 68500026 with hot water?
Yes. The hose is rated for water temperatures up to 155°C, making it ideal for heated water washers and tasks that require removal of greasy, stubborn dirt.
2. With which washers this model is compatible?
High-pressure hose 15 m 68500026 fits for washers: PW121C, PW136C, PW145, PW170C, PW175C, PW190C and PW300 HC. Before you buy, it's a good idea to compare the designation of your washer with the listed models.
3. Doesn't the 15m length cause a pressure drop at the end of the hose?
Thanks to its appropriately sized 1/4" (DN6) diameter and braided construction, the hose provides stable pressure over its entire length. In practice, this means that the power of the jet on the gun is fully sufficient for professional cleaning, with no noticeable loss of.
4. What applications is this hose best suited for?
The hose will work well both in domestic applications (washing cars, paving stones, terraces) and professional applications (car washes, workshops, agriculture, industry). High pressure and temperature parameters allow intensive, long-term operation.
5. Is the hose resistant to mechanical damage?
Yes. Braided construction of the hose increases its resistance to abrasion, kinking and accidental crushing. With proper use and storage, the hose retains its properties for a long time.
6. How to take care of a hose to make it last as long as possible?
When you're done, it's a good idea to drain the pressure from the system, disconnect the hose from the washer and gun, and store it in a dry, sheltered place, away from sharp edges and strong chemicals. Avoid storing the hose under high tension or strong bending for long periods of time.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.