PIPE CLEANING PROBE 25M 68500011A
- Oleo-Mac 25M Pipe Cleaner Probe 68500011A is a professional high-pressure line for unclogging sewer pipes, drains and rainwater pipes. Fits PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW300HC washers.
Pipe cleaning probe. Eliminates obstacles blocking pipe capacity.
Fits the following Oleo-Mac washers: PW121C; PW136C; PW145C; PW170C; PW175C; PW190C; PW 300HC;
What is the Oleo-Mac 25m pipe cleaning probe 68500011A and why you should have it?
PIPE CLEANING SONDA 25M 68500011A is a specialized high-pressure cable with a length of 25 meters ended with a cleaning tip, designed for use with Oleo-Mac pressure washers. It is used to effectively unclog and clean sewer pipes, drains, rainwater pipes and other pipes where blockages and deposits accumulate. A jet of water applied at high pressure through the probe nozzle breaks up and flushes out contaminants, restoring full patency of the system without the need for aggressive chemicals.
In practice, the probe replaces the traditional sewer spiral - it is faster, cleaner and much more effective. Thanks to its long 25m hose, it reaches deep into the installation, allowing to remove blockages located even far from the point of access, such as at a manhole, drain or outdoor trap.
This is an ideal solution for users of Oleo-Mac washers who want to take full advantage of the capabilities of their device and take care of the plumbing in the house, garden or workshop themselves, saving on the services of a plumber.
Where the 25M 68500011A pipe cleaner probe is mounted and what washers it works with?
Probe 25M 68500011A is designed specifically to work with selected models of Oleo-Mac pressure washers. Installation consists of screwing the probe tip to the high-pressure output of the washer or to the appropriate connector in place of the standard hose/accessory, according to the instructions of the device. Thanks to the factory-fitted connectors, the connection process is fast, tight and requires no additional adapters.
The probe fits the following Oleo-Mac washers:
- Oleo-Mac PW121C
- Oleo-Mac PW136C
- Oleo-Mac PW145C
- Oleo-Mac PW170C
- Oleo-Mac PW175C
- Oleo-Mac PW190C
- Oleo-Mac PW 300HC
In practice, this means that if you have one of the above washers, you can turn it into a powerful sewer cleaning tool. Just unhook the standard gun or lance, connect the probe and insert its tip into the pipe - the rest of the work will be done by water pressure. This solution will work well in both single-family homes and small businesses, workshops, service outlets or farms, where drains often become clogged.
Use of the 25M 68500011A pipe cleaning probe - practical examples
Pipe cleaning probe 25M 68500011A is an accessory with a very wide range of applications in daily cleaning and maintenance work. Its main task is to eliminate obstacles blocking pipe capacity. Thanks to the appropriate flexibility of the cable and the special design of the cleaning tip, the probe easily overcomes the bends and fittings of the installation, reaching places that are difficult to reach with traditional tools.
Examples of applications in the home and garden:
- Draining sewer pipes at home - kitchen and bathroom drains of the sink, bathtub, shower or washing machine, where grease, food residue, hair and detergents accumulate.
- Cleaning of external rain pipes - gutter downpipes clogged with leaves, needles, sand or sediment from the roof.
- Maintenance of the domestic sewage system - Periodic flushing of pipes on the property to prevent nuisance blockages and backflow of waste water.
Examples of professional applications:
- Workshops and small service establishments - Removal of blockages from installations that receive oil, lubricants or small production wastes.
- Farms - cleaning drainage pipes from agricultural equipment washers, drains in farm buildings or manure channels.
- Cleaning companies - Extension of the offer with the service of drain and pipe unclogging using the customer's or own pressure washer.
Thanks to its long range of 25 meters, the probe will prove useful wherever the connection point of the washer is located at a considerable distance from the blockage. This allows convenient work without the need to disassemble sections of the installation or make additional access holes.
Key features and benefits of Oleo-Mac 25M pipe cleaner probe 68500011A
The probe is designed to provide high cleaning efficiency, comfort of use and long service life. Here are the key benefits for the user:
- Length 25 m - Allows you to reach far-flung blockages without having to move the washer. Ideal for long sewer connections, rainwater pipes or under-floor installations.
- Effective removal of obstacles - high-pressure jet breaks fibrous blockages (hair, paper), hard deposits (stone, sand) and oily deposits that narrow the cross-section of the pipe.
- Without the use of strong chemicals - cleaning is done only with pressurized water, which is safe for the pipes, the environment and the household members. An excellent alternative to caustic chemical preparations.
- High flexibility of the cable - the probe is easily guided in the pipe, smoothly over bends and elbows, while being rigid enough not to bend.
- Solid workmanship - high-pressure hose with reinforced construction and metal tip guarantee durability even under heavy use.
- Dedicated to Oleo-Mac washers - secure and tight connection to the device, optimal adjustment to the parameters of pressure and water output of specific PW models.
In everyday use, this means fewer failures, less risk of flooding in the premises, and significant savings in time and money that would otherwise have to be spent on specialized services or replacing damaged sections of the installation.
Pipe cleaning probe 25M OLEO-MAC 68500011A - quality, durability and reliability for years to come
Oleo-Mac brand has been associated for years with professional equipment for garden and cleaning work. The 25M 68500011A pipe cleaning probe leverages the manufacturer's expertise in high-pressure technology to offer an accessory that will meet the demands of both home and semi-professional users.
Durable design of the cable and connectors minimizes the risk of abrasion and unsealing, even with frequent use. Robust metal workmanship ensures resistance to corrosion and repeated connection and disconnection from the washer. The materials used are resistant to high-pressure water and typical contaminants present in sewer systems.
In practice, the user gains a tool that will serve for many seasons, allowing regular maintenance of pipes without fear of damaging the probe or the installation. As a result, the investment in the probe pays for itself quickly - just a few self-removed blockages can costly replace visits from professionals.
Possible technical data of pipe cleaning probe 25M 68500011A*
(*Parameters may vary by production run - it's always a good idea to check the details in the data sheet for the washer or accessory.)
- Cable length: 25 m
- Type: high pressure pipe cleaning hose
- Purpose: Oleo-Mac pressure washers PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW300HC
- Hose material: flexible high-pressure hose (reinforced)
- Cleaning tip: metal (brass/steel), suitable for high-pressure operation
- Application: unclogging sewer, drain and rainwater pipes, cleaning water systems
How to use the 25M 68500011A probe - simple step-by-step operation
Operation of the pipe cleaning probe is intuitive and requires no plumbing expertise. Below is a general workflow, which you should adapt to the instructions of your particular washer:
- Connect the probe to the high-pressure output of the Oleo-Mac washer or to a dedicated accessory socket.
- Insert the tip of the probe into the pipe to be cleaned - through a revision, drain grate, removable trap or service hole.
- Start the washer by gradually increasing the pressure and gently advancing the probe deep into the pipe.
- If you encounter resistance, make several reciprocating movements to break up the blockage.
- After unblocking the pipe, slowly pull out the probe, leaving the water jet on - this will allow you to thoroughly flush out loose debris.
By using the probe prophylactically, such as once-two times a year, you can significantly extend the life of the installation and avoid unexpected failures at the least opportune moment - during holidays, family gatherings or heavy rainfall.
FAQ - Frequently asked questions about the 25M 68500011A pipe cleaner probe
1. Will the 25M 68500011A probe fit into any pressure washer?
The probe is dedicated to selected models of Oleo-Mac washers: PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW300HC. For other devices, the appropriate adapters may be necessary, so it is worth checking the compatibility of connections and pressure parameters before purchase.
2. What diameter pipes can be cleaned with this probe?
The probe is primarily suitable for typical home and garden drainage systems and rainwater pipes - from narrow bathroom drains to larger backyard sewer lines. The exact range of diameters depends on the structure of the pipes and the type of blockage, but the cable freely works in standard diameters of 32-110 mm found in households.
3. Is it safe to use the probe on plastic pipes (PVC, PP)?
When used properly according to the instructions of the pressure washer and avoiding excessive pressure, the probe is safe for typical plastic pipes. The water jet removes contaminants without mechanical friction of the spiral, which reduces the risk of damage compared to some mechanical methods.
4. Whether additional cleaning chemicals are needed?
No, by default, the probe works only with high-pressure water, which is perfectly sufficient in most cases. In situations of very severe, oily blockages, you can - if allowed by the manufacturer of the washer - use mild cleaning agents, but this is usually not necessary.
5. How to store the probe to make it last as long as possible?
After finishing work, it is a good idea to rinse the probe with clean water, disconnect it from the washer and roll it into wide coils, avoiding sharp bends. Store the accessory in a dry, shaded place, away from high temperatures and UV radiation - this will keep the cable and connectors flexible and tight for years to come.
6. Will the probe help if the pipes are completely flooded with water?
Yes, in many cases this is even a typical situation with the resulting congestion. The high-pressure jet from the probe tip breaks up and flushes out the obstruction blocking the drain, and the water lingering in the pipe is discharged after the blockage is removed.
7. How often to use the probe prophylactically?
In homes where pipes often get clogged (a lot of cooking, small children, hair, grease), it is worth doing a preventive flushing of the system once every 6-12 months. This reduces the risk of sudden clogging and unpleasant odors coming out of the drains.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.