ROTOJET LANCE 68500007A
- ROTOJET LANCE 68500007A - professional lance with rotary nozzle for Oleo-Mac PW 121C, PW 136C, PW 145 washers. Turbo water jet removes stubborn dirt from pavers, patios and gardening machinery, increasing cleaning efficiency and speed. Ideal for home and
ROTOJET LANCE 68500007A - professional lance with rotary nozzle for Oleo-Mac PW 121C, PW 136C, PW 145C washers
ROTOJET LANCE 68500007A is a high-pressure lance with a rotating (rotary) nozzle, specially designed for Oleo-Mac PW 121C, PW 136C and PW 145 pressure washers. It's an accessory that significantly increases cleaning efficiency by creating a turbine effect and generating a concentrated, rotating stream of water with very high cleaning power. This makes it ideal for removing the most stubborn dirt from hard surfaces in the home, garden and around the property.
Increases efficiency by creating a turbine effect creating the right pressure. All models can use a rotary nozzle for high cleaning performance. Fits the following Oleo-Mac washers: PW 121C, PW 136C, PW 145.
What is and how does the rotary lance ROTOJET lance 68500007A work?
ROTOJET LANCE 68500007A is a specialized lance ending in a rotating nozzle that transforms a straight stream of water into an intensely rotating cone. Water under high pressure is ejected from the nozzle in a circle at a very high speed, resulting in the so-called turbine effect. This method of spraying combines the power of a spot spray with coverage of a larger area, making cleaning:
- much faster - you will wash a larger area in less time,
- more effective - the whirling jet easily removes dried and deeply embedded dirt,
- more economical - shorter operating time means less water and energy consumption.
In practice, this means that the ROTOJET LANCE 68500007A will cope where an ordinary fan nozzle is insufficient - with heavily soiled paving stones, moss-covered patio slabs or heavily soiled garden machinery.
Where the ROTOJET lance 68500007A is mounted on the Oleo-Mac washer?
ROTOJET LANCE 68500007A is an accessory that mounts directly to the pressure washer gun. From the operator's side, it ends with a standard connection that plugs into the high-pressure gun's quick coupler on Oleo-Mac PW 121C, PW 136C and PW 145 washers. On the working side there is a rotary nozzle - a black head with a characteristic body and a rubber shock absorber.
Assembly is quick and intuitive:
- Turn off the washer and cut off the water supply.
- Disconnect the previously used lance or tip from the gun.
- Push the ROTOJET LANCA 68500007A into the quick release until it snaps into place.
- Check the stability of the connection, then start the washer and begin work.
Thanks to its fitting to specific Oleo-Mac models, there is no need for additional adapters or adapters - the lance is ready to work immediately after installation.
Application of the rotary lance - where the ROTOJET LANCE 68500007A will work best?
ROTOJET LANCE 68500007A was created for special tasks - where a standard lance with a flat or adjustable nozzle copes with difficulty or requires multiple passes over the same surface. The most important typical applications are:
- Washing of cobblestones and driveways - Removal of stains from oil, mud, clay, tires, as well as moss and lichen in gaps between cubes.
- Cleaning of terraces, stairs and concrete slabs - Ideal for restoring the original color of concrete slabs, natural stone, garden edging and outdoor stairs.
- Washing of fences, walls and facades resistant to high pressure - Effective removal of old tarnish, soot, discoloration and stubborn dirt after winter.
- Maintenance of garden machinery and equipment - perfect for cleaning lawnmowers, tillers, trailers, wheelbarrows, concrete mixers and other equipment exposed to tough dirt.
- Work around the house and farm - cleaning the sides of trailers, metal structures, grates, bars or elements of fences from dried mud and rust (before painting).
Thanks to the concentrated force of the jet, the lance reduces the time for each of the above jobs, which will be especially appreciated by those who frequently use the pressure washer - both private users and professionals engaged in service cleaning of surfaces.
Quality, durability and reliability of ROTOJET pressure lance 68500007A
ROTOJET LANCE 68500007A has been made of sturdy materials resistant to long-term operation under high water pressure. The body of the lance is made of corrosion-resistant metal, while the working elements of the nozzle are made of durable plastics and alloys that do not wear out quickly even with frequent use.
- Durable design - reinforced lance and robust rotary nozzle are designed for use in garden, construction and workshop conditions.
- Resistance to mechanical damage - elastic rubber elements around the nozzle provide additional protection against bumps and abrasions.
- High reliability - stable operating parameters for a long time, no sudden drops in pressure caused by wear of rotating elements in the nozzle.
This makes ROTOJET LANCA 68500007A an investment for years to come. Properly used and occasionally cleaned of fine dirt (such as sand or silt), it will retain its full working properties for a long period of time, which is especially important for service companies and demanding individual users.
Compatibility of ROTOJET LANCE 68500007A with Oleo-Mac PW 121C, PW 136C and PW 145 washers
One of the most important features of the ROTOJET lance 68500007A is its full compatibility with popular Oleo-Mac pressure washers. The manufacturer has provided for its use in the following models:
- Oleo-Mac PW 121C,
- Oleo-Mac PW 136C,
- Oleo-Mac PW 145.
Thanks to this, the user does not have to worry about choosing the right connection or adjusting the pressure parameters - the lance was designed at the factory with these particular devices in mind. This means:
- seamless connection without adapters,
- maintaining a safe operating pressure range,
- optimum use of the power of the washer when working with the rotary nozzle.
If you have one of the above Oleo-Mac washers, ROTOJET LANCA 68500007A will be an ideal original (or dedicated) addition to the basic equipment, significantly expanding its capabilities.
Benefits for the user - why choose ROTOJET LANCA 68500007A?
Choosing the ROTOJET rotary lance 68500007A means a number of tangible benefits that can be felt from the first use:
- Saving time - you will clean the soiled surfaces faster, so you can do the work in a short time that would take much longer with an ordinary lance.
- Greater cleaning efficiency - The rotating water jet effectively removes old dirt, deposits and tarnish that could not be removed with the fan nozzle.
- Multifunctionality - one lance is enough for a whole range of tasks: from cleaning the terrace, to the driveway, to maintaining machinery and metal parts.
- Comfort of use - The long lance makes it easy to reach remote or low places without having to bend over and put undue strain on the spine.
- Better visual effect - surfaces look like new after washing, which positively affects the aesthetics of the property, garden or driveway.
These advantages make the ROTOJET LANCE 68500007A one of the most important accessories for every Oleo-Mac pressure washer owner who expects maximum work efficiency.
Technical data ROTOJET LANCE 68500007A (basic information)
- Name: ROTOJET LANCE 68500007A
- Type: lance for pressure washer with rotary nozzle (turbocharged)
- Purpose: Oleo-Mac PW 121C, PW 136C, PW 145 high-pressure washers
- Nozzle type: rotary (rotary) nozzle for high cleaning performance
- Function: increase cleaning efficiency through turbine effect and concentrated water jet
- EAN: 8026619035037
- Manufacturer/System Code: 68500007A
- Lance material: corrosion-resistant metal (high-pressure tube)
- Nozzle components: durable plastic and metal, rubber shock absorbing bumper
Examples of scenarios of use of LANCA ROTOJET 68500007A in the house and garden
ROTOJET LANCA 68500007A will work well in many everyday situations where high cleaning power is required:
- Before the barbecue season - Quickly wash the terrace, concrete slabs and pavement around the barbecue, remove greasy stains and soot.
- After winter - Thorough removal of moss from paving stones, lichen from garden edging and green growth from walls.
- After renovation or construction - Effective cleaning of driveways, concrete, machinery and tools from mortar, plaster or mud residues.
- Before painting metal parts - Preparation of steel surfaces, railings or fences by removing dirt and weak corrosion deposits.
- Maintenance of gardening equipment - Removal of dried grass, soil and mud from mowers, tillers or chippers.
In each of these applications, the lance allows you to achieve a result that would normally require wire brushes, chemicals or long, tedious manual work.
FAQ - Frequently asked questions about ROTOJET LANCA 68500007A
1. With which washers the ROTOJET LANCE 68500007A is compatible?
The lance was designed to work with Oleo-Mac high-pressure washers: PW 121C, PW 136C and PW 145. Thanks to its dedicated connector, it guarantees a secure and tight connection without additional adapters.
2. For which jobs is it best to use a rotary nozzle?
The rotary nozzle is ideal for heavy-duty tasks: removing moss and lichen from pavers, old dirt from concrete, dried mud, and cleaning garden equipment and metal parts before painting. Wherever the usual flat nozzle proves to be too weak, the ROTOJET LANCE 68500007A will greatly speed up the work.
3. Can the lance damage delicate surfaces?
The rotating, concentrated water jet is very powerful, so it is not recommended to use the lance on delicate surfaces such as soft wood, thin paint layers or soft plastics. In such cases, it is better to use an ordinary fan nozzle with lower pressure. It's always a good idea to run a test on a small, invisible section.
4. Does the installation of the lance require tools?
No, installation of ROTOJET LANCA 68500007A does not require tools. Simply unplug the existing lance from the washer gun and plug in the new one until it snaps into place. The whole operation takes a few seconds.
5. How to take care of a lance to make it last as long as possible?
After finishing work, it is a good idea to rinse the lance with clean water to remove sand and silt particles from the interior. Do not drop the nozzle on a hard surface or store it in a place exposed to heavy dirt. An occasional check of the nozzle patency and removal of any debris from the nozzle will maintain the full power of the jet and prolong the life of the accessory.
6. Is the ROTOJET LANCE 68500007A suitable for continuous operation?
The lance is designed for heavy use in domestic and semi-professional settings. In combination with a suitable Oleo-Mac washer, it can work for longer periods of time, but always follow the washer manufacturer's recommendations for duty cycles and technical breaks.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.