PIPE CLEANING PROBE 15M 68500005A
- Pipe cleaning probe 15M 68500005A Oleo-Mac professional high-pressure hose for unclogging pipes, drains and sewers. Compatible with PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW 300HC washers.
PIPE CLEANING PROBE 15M 68500005A - PROFESSIONAL UNCLOGGING OF INSTALLATIONS WITH OLEO-MAC WASHERS
The 15 m pipe cleaning probe 68500005A is a professional, high-pressure attachment for Oleo-Mac pressure washers, designed to effectively unclog pipes, drains, sewers and all kinds of plumbing lines. Thanks to the appropriately selected working length and the special design of the hose and cleaning nozzle, the probe allows you to quickly and safely remove blockages of grease, sediment, hair, kitchen debris or sand, restoring full capacity of the installation without having to call a plumber.
Pipe cleaning probe. Eliminates obstacles blocking pipe capacity.
Fits the following Oleo-Mac washers: PW121C; PW136C; PW145C; PW170C; PW175C; PW190C; PW 300HC;
What is pipe cleaner probe 15M 68500005A and how it works?
Pipe cleaning probe 15M 68500005A is a flexible reinforced high-pressure hose terminated with a special nozzle for hydrodynamic pipe cleaning. When connected to a compatible Oleo-Mac washer, high-pressure water is directed through a nozzle into the pipe. Holes in the nozzle release a jet of water partly forward - breaking up the blockage - and backward - generating a pulling force that itself "pulls" the probe deeper into the installation. As a result, the user does not need to use a lot of force, and cleaning is carried out evenly and effectively along the entire length of the cable.
The probe works only with pure pressurized water - no aggressive chemicals or caustic preparations. This is a safe solution for PVC, PP, PE, steel or cast iron pipes, as long as they are technically sound and compatible with typical home and garden installations.
Pipe cleaning probe assembly 15M 68500005A for Oleo-Mac washers
Probe 15M 68500005A is designed as an original accessory for Oleo-Mac pressure washers. It is equipped with precision-fit connection terminals that make installation fast, convenient and completely tool-free. The probe hose connects to the gun or the working handle of the washer, in place of the standard lance. Once the connection is made, simply turn on the device, set the appropriate operating pressure and insert the probe tip into the pipe or drain to be cleaned.
The probe fits the following models of Oleo-Mac washers:PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW 300HC. This means broad compatibility with popular washers used in the home, workshop and small service businesses. The 15-meter length allows you to reach blockages located deeper in the system without having to remove pipes or forge walls.
Use of pipe cleaning probe 15M 68500005A in home, garden and business
The 15M 68500005A pipe cleaning probe is widely used in both typical domestic installations and small commercial facilities. Perfect for:
- unclogging sewer pipes in the kitchen (blockages from grease, food residues, deposits from detergents),
- cleaning bathroom drains - shower trays, bathtubs, sinks, urinals,
- removing blockages in toilets and sewer risers (after initial mechanical unblocking),
- cleaning of household rain drains and roof downpipes,
- flushing drains around the house, linear drains and manholes,
- maintaining the patency of installations in workshops, car washes, small service establishments.
Thanks to its flexible hose and adequate strength of water jet, the probe works well wherever a traditional sewer spring proves insufficient or too invasive. Hydrodynamic cleaning is gentler on the inside of the pipe, while more effectively flushing out deposits over a long length of the system.
Quality and durability of Oleo-Mac 15M pipe cleaner probe 68500005A
The offered probe is made of durable, multilayer high-pressure cable with increased resistance to abrasion and bending. The external hose guard protects the hose from mechanical damage caused by movement in tight bends and pipe bends. The hose core is adapted to work with the high pressure generated by Oleo-Mac washers, which guarantees the safety and long life of the product when used properly.
The connection terminals and connectors are made of high-quality brass, resistant to corrosion and pressurized water. Precision threads ensure a tight connection to the washer and eliminate pressure loss. The cleaning nozzle is designed to minimize the risk of jamming in the pipe and to allow the hose to be easily reversed when the work is completed.
Benefits of using Oleo-Mac 15M 68500005A pipe probe in daily operation
When you choose the 15M 68500005A pipe cleaner probe, you get a tool that quickly pays for itself and realistically improves the comfort of your home or facility. Here are the key benefits for the user:
- Saving money - Removing blockages yourself reduces the need to call a plumber or emergency sewer service. Even a single major failure can cost as much as buying a probe.
- Quick response to emergencies - having a probe in your home or business, you can take immediate action when you notice slower water flow, sewage backflow or unpleasant odor from drains.
- Installation safety - pressurized water cleaning is gentler on pipes than aggressive chemicals, while being more effective on long stretches of the system.
- Multiple, long-term use - robust design of the hose and connectors makes the product ideal for both individual users and small service companies (e.g. cleaning companies, property managers).
- Versatility - one probe will serve different sections of the system: from the sink trap, to the sewer riser, to external drains and drains.
Technical parameters of pipe cleaning probe 15M 68500005A
- Hose working length: 15 m - optimal for typical domestic and backyard installations.
- Purpose: cleaning and unclogging of pipes, drains, sewer lines and drains.
- Compatibility: oleo-Mac washers: PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW 300HC.
- Hose material: reinforced high-pressure hose with abrasion-resistant coating.
- Tips: brass connection couplings matched to Oleo-Mac system.
- Type of work: hydrodynamic cleaning with high-pressure water.
- Manufacturer/System Code: 68500005A.
- EAN code: 8026619035082.
Examples of scenarios of using Oleo-Mac pipe probe PW121C / PW136C / PW145C / PW170C / PW175C / PW190C / PW 300HC
To better illustrate the practical capabilities of the 15M 68500005A probe, it is worth recalling some typical situations from everyday life:
- Kitchen in a single-family house - after a few years of heavy use, the sink drain begins to get clogged by grease and food debris. Instead of repeatedly using chemicals, the user connects the probe to the PW136C washer, inserts the tip through the siphon into the pipe, and flushes out years of sediment in minutes.
- Bathroom in an apartment - hair and cosmetic residues accumulate in the shower drain. The probe connected to the PW145C washer allows you to insert the tip deep into the cable and remove the blockage, without removing the shower tray.
- Domestic stormwater drainage - after autumn, roof drain pipes and underground drainage pipes are clogged with leaves and sand. The 15M probe combined with the more powerful PW190C washer allows you to flush the entire installation and restore full patency.
- Small service company - in a car repair shop or self-service car wash, the drain and drain pipes are regularly silted up. Instead of outsourcing the service each time, the owner uses a probe with the PW 300HC washer, performing preventive cleaning every few weeks.
Why choose the 15M 68500005A pipe cleaning probe for Oleo-Mac washers?
By opting for the original Oleo-Mac 15M 68500005A probe, you're investing in an accessory perfectly suited to your washer. As opposed to universal, random solutions:
- you are assured of compatibility and tightness of connections with the listed washer models,
- you minimize the risk of failure, pressure drop and pump damage,
- you get a product designed for years of heavy use,
- you gain convenience - the lightweight, flexible hose is easy to guide and retracts when you're done.
It is the ideal choice for demanding users who expect from garden and workshop accessories not only a low price, but above all quality, reliability and safety of work.
FAQ - Frequently asked questions about the 15M 68500005A pipe cleaner probe
1. To which washers the probe 15M 68500005A fits?
The probe is designed for Oleo-Mac pressure washers: PW121C, PW136C, PW145C, PW170C, PW175C, PW190C, PW 300HC. No additional adapters required - just plug it in directly according to the washer's instructions.
2. Can I use this probe with another washer than Oleo-Mac?
The probe was designed with the Oleo-Mac connection system in mind. Use with other brands may require special adapters and is not guaranteed by the manufacturer. In order to maintain full safety and performance, it is recommended to use it only with compatible Oleo-Mac models.
3. How often can you use a pipe unclogging probe?
The probe is designed to be reusable. When used properly (without excessive bending of the hose, working on too sharp pipe elbows or mechanical tugging), it can serve for many years, both for removing sudden blockages and for preventive flushing of the system.
4. Is it safe to use the probe on plastic pipes?
Yes, with proper selection of working pressure and caution, hydrodynamic cleaning is safe for typical PVC, PP or PE pipes used in domestic plumbing systems. Avoid over-pressurizing old or damaged systems and always follow the washer manufacturer's recommendations.
5. Do I need to use chemicals to work with the probe?
Not. Pipe cleaning probe 15M 68500005A works only on the principle of high-pressure water jet, without the need for chemicals. This is an environmentally friendly solution, safe for the installation and the environment, and at the same time very effective.
6. How to store the probe after finishing work?
After use, it is recommended to rinse the hose with clean water, disconnect it from the washer and gently coil it into wide coils. It is best to store the probe in a dry, shaded place, away from sharp edges and heat sources. This will keep it flexible and tight for a long time.
7. What pipe diameters can be cleaned with this probe?
The 15M 68500005A probe works best on typical pipe diameters used in domestic and backyard installations - from sink and shower drains to kitchen pipes to sewer and drainage pipes. Due to the flexibility and design of the hose, it copes with both narrow and slightly wider hoses.
8. Will the probe handle hard blockages, such as cemented deposits?
The probe is great at dealing with typical blockages from grease, sludge, sand, kitchen debris or hair. For very hard obstacles (e.g., mortar residue, solid elements), additional mechanical methods or intervention by a specialized company may be required. However, in most home and garden applications, the probe proves to be fully sufficient.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.