LANCE FOR WASHING FLAT SURFACES 68500004A
- Oleo-Mac flat surface cleaning lance 68500004A is a professional "surface cleaner" for PW 155, PW 170C, PW 175C, PW 190C, PW 300 HC washers. Provides fast, even cleaning of sidewalks, patios and driveways without splatter, with the ability to work in the
FLAT SURFACE CLEANING LANCE 68500004A - Professional cleaning of sidewalks without splashing
Lance for washing flat surfaces 68500004A is a specialized accessory for Oleo-Mac high-pressure washers, designed for fast, even and clean washing of sidewalks, terraces and other flat surfaces, without the nuisance of splashing water and dirt on facades or walls of buildings.
The tool is especially recommended for washing sidewalks and such surfaces where splashing should be avoided.
Fits the following Oleo-Mac washers: PW155; PW 170C; PW 175C; PW 190C; PW 300 HC.
Note! Gun does not constitute a set of lance for washing pow. flat.
The lance can work with water up to 60 degrees C.
What is the flat cleaning lance 68500004A and how it works?
Lance for cleaning flat surfaces 68500004A is a complete cleaning kit of the "surface cleaner" type, consisting of a housing with rotary nozzles and a special lance that connects the device to the pressure washer gun. Unlike the classic spot or fan nozzle, in this solution the water jet rotates under the disc shield, so washing is even, efficient and without splashing to the sides.
During operation, a rotating bar with nozzles distributes water under constant pressure across the entire width of the head. Water and debris are sealed under the cover, minimizing spills. As a result, the surface is thoroughly washed and the surroundings - walls, pots, doors, facade - remain clean and dry.
This solution is particularly appreciated by users of high-pressure cleaners, who appreciate the comfort of work, repeatable effect and significant time savings compared to the classic lance.
Where the lance for washing flat surfaces is mounted 68500004A?
The 68500004A flat surface washing lance is designed to be mounted on Oleo-Mac high-pressure washers. Fits the following models:
- Oleo-Mac PW 155,
- Oleo-Mac PW 170C,
- Oleo-Mac PW 175C,
- Oleo-Mac PW 190C,
- Oleo-Mac PW 300 HC.
Installation is done by connecting the lance to the pressure washer gun and the water connection coming out of the washer. It is worth remembering that the gun is not included in the set - use the gun supplied with the washer.
The standard installation procedure in daily operation is as follows:
- Disconnect the standard lance or fan nozzle from the gun.
- Connect the lance 68500004A to the gun, making sure that the connector is well tightened and sealed.
- The other end of the lance is terminated with a cleaning head - after setting it on a flat surface, you can start washing.
- After work, disconnect the lance, rinse the set with clean water and store in a dry place.
Such a way of mounting guarantees full compatibility with Oleo-Mac washers and safety of use - there is no need for additional adapters or modifications, which is important from the point of view of durability and warranty of the device.
Oleo-Mac flat cleaning lance 68500004A - key advantages and applications
Model 68500004A was developed for intensive work in domestic and semi-professional conditions. From the user's point of view, the most important benefits are:
1. Splash-free cleaning - clean surroundings and working comfort
The housing that covers the nozzles ensures that water does not splash to the sides. This is especially important when washing:
- sidewalks adjacent to the facade of the house - water does not dirty the walls or windows,
- terraces lined with wood, composite or tiles - furniture and walls remain dry,
- driveways at the garage - minimized risk of splashing the garage door, gate or car.
This makes it possible to wash large areas even in the immediate vicinity of the house, without having to protect them with plastic sheeting, dismantle furniture or move away pots.
2. Faster and more even cleaning
Spinning beam with nozzles washes a wide strip of pavement in one pass. In practice, this means:
- significant reduction in cleaning time compared to an ordinary lance,
- the absence of streaks and "glowing stripes", which can arise with too close or uneven guidance of a classic nozzle,
- repeatable effect on the entire cleaned surface - ideal when washing paving stones on the representative part of the property.
This solution will be especially appreciated by users who regularly clean larger areas - such as several parking spaces, a large terrace or a wide sidewalk along the house.
3. High durability and ability to work with hot water
The lance can work with water up to 60°C, which increases the effectiveness of removing tough dirt - greasy stains, oil stains or stubborn biological dirt (mosses, algae, lichens). Construction made of heat-resistant plastics and metal components ensures:
- long life of the set even with frequent use,
- stability of operation - no deformation or leakage at elevated water temperatures,
- user safety - properly selected materials and seals.
Daily uses of the flat cleaning lance 68500004A
Lance for washing flat surfaces 68500004A will prove useful wherever the combination of accuracy, speed and aesthetics of work is important. Examples of applications in the home and around the property:
- Sidewalks and alleys made of cobblestones - Effective removal of sand, mud, leaf and moss deposits with minimal spillage of dirt on the lawn or flowerbeds.
- Terraces made of tiles, concrete or composite boards - Gentle but effective washing of a large surface, without damaging the joints and structure of the material.
- Driveways and parking spaces - quick cleaning of concrete or pavement from dirt from tires, oil, slush or road salt.
- Entrance areas for your home, business or workshop - The presentable nature of the place requires regular cleaning; the lance helps maintain aesthetics without getting doors and displays wet.
- Terraces in catering and service establishments - The ability to quickly refresh the area before opening the premises, without splashing on tables, displays or advertising.
Thus, one accessory replaces a lot of time-consuming manual work - sweeping, scrubbing or using brushes with water. Combined with the Oleo-Mac washer, it creates a functional set for year-round cleaning around the building.
Quality, durability and reliability - why choose the lance 68500004A?
Compatibility with Oleo-Mac washers
Selecting an accessory from the same manufacturer as the washer is a guarantee of full technical compatibility. Lance 68500004A has been specially developed for Oleo-Mac PW 155, PW 170C, PW 175C, PW 190C and PW 300 HC models, therefore:
- fits without additional adapters,
- ensures optimal water flow and operating pressure,
- does not cause excessive load on the washer pump.
Thoughtful ergonomics and easy operation
The design of the head and lance provides comfortable guidance over the surface to be cleaned. Uniform pressure and light glide on the ground allow you to work without excessive effort even for long periods of time. The set's ergonomics are appreciated especially when:
- multiple washings of large areas during the season,
- jobs performed by users of varying height and physical strength,
- semi-professional applications, such as in small service companies or farms.
High efficiency while keeping the ground safe
The use of a classic spot nozzle at high pressure can lead to damage to joints, leaching of sand from the pavement and even spalling of the concrete. Lance for washing flat surfaces 68500004A spreads the water jet over a larger area, so:
- maintains high cleaning efficiency,
- protects more delicate surfaces from damage,
- allows for safe cleaning of even decorative cube or tile elements.
Parameters and technical data of the lance for washing flat surfaces 68500004A
- Purpose: washing of flat surfaces (sidewalks, terraces, driveways, alleys, squares)
- Compatibility: oleo-Mac high-pressure washers: PW 155, PW 170C, PW 175C, PW 190C, PW 300 HC
- Type of accessory: lance for cleaning flat surfaces of the "surface cleaner" type
- Maximum water temperature: up to 60°C
- Design: head with cover and rotating bar with nozzles, lance connecting to the washer gun
- Required accessories: washer gun (not part of the set)
- Product code: 68500004A
- EAN code: 8026619035075
Why the 68500004A flat cleaning lance is a good choice for your home?
If you have an Oleo-Mac high-pressure washer and regularly wash your sidewalks, driveway or patio, the 68500004A lance is one of the most practical accessories you can buy. From the point of view of a homeowner or small business owner, it's an investment that pays off quickly:
- Saving time - wide head and even washing reduce cleaning time by up to tens of percent.
- Better visual effect - the surface is uniformly clean, with no lighter or darker stripes.
- Work comfort - No splashing, less wetting of the operator, less soiling of the walls and surroundings.
- Versatility - one accessory will handle all the main pavements around the building.
- Durability - Robust design suitable for use with hot water up to 60°C.
FAQ - Frequently asked questions about the flat cleaning lance 68500004A
1. Does the 68500004A lance fit all high-pressure washers?
The lance was specially designed for Oleo-Mac washers: PW 155, PW 170C, PW 175C, PW 190C and PW 300 HC. Use with other washers may require adapters or may not be possible - use with listed models only is recommended.
2. Is the gun included in the kit?
Not. Gun is not a set of lance for washing flat surfaces. The gun supplied with the high-pressure cleaner is used for the work.
3. Up to what water temperature can I use this lance?
The lance can work with water up to 60°C. Using hotter water can damage gaskets or plastic parts.
4. What surfaces are best cleaned with this lance?
Lance is ideal for cleaning all flat surfaces: sidewalks, terraces, driveways, yards, garden alleys or entrance areas. It is especially recommended where it is necessary to avoid splashing dirty water on walls, facades or plants.
5. Can a lance replace a standard lance on any job?
Not. Flat surface lance is mainly designed for washing horizontal surfaces. For washing facades, cars, fences or hard-to-reach areas, it is better to use a standard lance or dedicated nozzles, and consider the 68500004A lance as a complementary specialized accessory.
6. Is the operation of the lance complicated?
Not. Simply connect the lance to the washer gun, set the appropriate pressure and guide the head over the surface just like a traditional brush. After a short getting used to it, the work becomes very intuitive and fast.
7. How to take care of a lance to make it last as long as possible?
After work, rinse the lance with clean water, remove any debris from the nozzles and let it dry. Store in a dry place, protected from mechanical damage. Regular maintenance prolongs the life of seals and rotating components.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.