SANDBLASTING LANCE 68500001A
- Oleo-Mac professional sandblasting lance 68500001A for PW121C, PW135C, PW145, PW170C, PW175, PW190C, PWX200C washers. Ideal for removing rust, old paint, scale and dirt from metal, concrete, paving and stone.
SANDING LANCE 68500001A for Oleo-Mac washers - professional removal of rust, paint and scale from any surface
SANDBLASTING LANCE 68500001A is a professional attachment for Oleo-Mac high-pressure washers, which turns an ordinary washer into an effective sandblasting system. Very practical and easy to use, allows you to smooth any surface eliminating rust, varnish and scale deposits.
Fits the following Oleo-Mac washers: PW121C, PW135C, PW145, PW170C, PW175C, PW190C, PWX200C.
Review photo.
What is the 68500001A PIASKING LANCE and how it works?
SANDING LANCE 68500001A is a specialized pressure nozzle with a hose that sucks in abrasive (such as sand), designed for use with Oleo-Mac high-pressure washers. It uses the principle of an injector - a high-pressure jet of water sucks abrasive from a container through a sand hose and ejects a mixture of water and sand onto the surface to be cleaned. This allows the user to remove difficult dirt and coatings without investing in a separate sandblasting unit.
This solution is particularly beneficial for home users, small workshops and service companies that want to achieve the effect of professional sandblasting with their own pressure washer. The use of water along with the abrasive reduces dust compared to traditional sandblasting, which improves comfort and safety at work.
Where the sandblasting lance 68500001A is mounted?
Installation of the sandblasting lance 68500001A is quick and intuitive. The attachment was designed specifically to work with selected Oleo-Mac washer models, making the connection stable and tight.
- Connection to the washer gun - metal lance body connects directly to the pressure washer gun, replacing the standard washing lance. The connection is made by means of a suitable connector matched to the PW121C, PW135C, PW145, PW170C, PW175C, PW190C, PWX200C models.
- Connection of abrasive suction hose - to the body of the lance is connected through a brass connector flexible hose, the other end of which is placed in a container with sand or other abrasive. This ensures that the abrasive is automatically sucked up while the washer is running.
- Working distance adjustment - the lance tip allows you to work at different distances from the surface to be treated. Depending on the type of substrate (metal, concrete, stone, wood) and the degree of dirt, the user can choose the optimal distance to achieve cleaning efficiently but without damage.
Such a solution makes the installation of the attachment within the reach of any user: just disconnect the standard lance, connect the sandblasting lance, place the hose in the abrasive tank, start the washer and start working.
Applications for sandblasting lance 68500001A - where it will work best?
With a combination of high pressure and abrasive, the 68500001A sandblasting lance allows you to thoroughly clean almost any hard surface. It is an ideal tool for do-it-yourselfers, homeowners, farmers, locksmiths, auto repair shops and construction companies.
- Removal of rust from metal parts - cleaning of steel rims, trailer frames, railings, fences, gates, steel structures, machine parts or tools. The lance easily reaches hard-to-reach places such as corners, welds and embossments.
- Stripping of old paint and varnish coatings - excellent for removing peeling paint from metal fences, gates, balcony railings, garage doors, body parts or steel structures prior to restoration.
- Removal of scale and stubborn dirt - Works great with lime deposits, scale and tarnish on concrete, paving stones, natural stone, patio slabs, exterior stairs or foundations.
- Surface preparation for painting and maintenance - ideal tool for comprehensive substrate preparation prior to application of paints, varnishes, anti-corrosion primers, epoxy and polyurethane coatings.
- Cleaning of machine and vehicle components - Sandblasting of frames of off-road vehicles, quads, motorcycles, agricultural machinery (plows, harrows, seeders, trailers) or construction machinery.
Oleo-Mac SPRAYING LANCE 68500001A - quality, durability and reliability in one package
Sandblasting lance 68500001A was developed for intensive, long-term use in demanding conditions. The manufacturer has taken care in the selection of materials and design to ensure high resistance to mechanical wear, abrasive action and high-pressure operation.
- Durable lance body - metal construction resistant to mechanical damage and abrasion, ensuring long life even with regular sandblasting of large areas.
- Brass connectors - precisely made brass connectors guarantee the tightness of the system, resistance to corrosion and secure connection with the washer gun and abrasive suction hose.
- Flexible, reinforced hose - The transparent abrasive feed hose allows visual control of material flow, and its reinforced structure increases resistance to kinking and abrasion. Thanks to its long length, it provides convenience of work and freedom of positioning the abrasive container.
These features make the 68500001A lance an investment for years - reliable, resilient and ready to work whenever you need a professional cleaning result.
The most important benefits for the user - why choose the sandblasting lance 68500001A?
When you choose the 68500001A sandblasting lance for your Oleo-Mac washer, you gain a number of tangible benefits that translate into time and money savings, as well as a higher quality of work performed.
- Savings - no need to purchase a separate sandblaster
With this attachment, you make use of the Oleo-Mac high-pressure cleaner you already own. This solution is much cheaper than buying a separate sandblasting unit, while providing a similar working effect. - Versatility of applications
One lance allows to remove rust, old paint coatings, varnishes, hard scale, graffiti, atmospheric raids or greasy dirt combined with dust. Suitable for metal, concrete, paving stones, stone, brick, and with the right choice of abrasive also for harder woods. - High cleaning efficiency
The combination of the energy of the water jet and the sharp abrasive grain makes it possible to remove dirt very thoroughly, which a regular pressure lance will not remove - for example, deeply pitted corrosion foci or several layers of old paint. - Better working comfort than in traditional dry sandblasting
The use of water in the sandblasting process significantly reduces the amount of floating dust, resulting in greater clarity at the work site and less dust settling on the surrounding area. It is still necessary to use personal protective equipment (goggles, mask, gloves), but the comfort and safety of work is noticeably higher. - Mobility and speed of preparation for work
The kit is lightweight, easy to carry and requires no complicated assembly. Within minutes of connecting the lance, you can start sandblasting in your driveway, garage, workshop or construction site.
Examples of applications in the home, workshop and business using the lance 68500001A
The 68500001A SANDING LANCE will work well for many daily and periodic restoration jobs, both around the house and in professional activities.
- Around the house and garden
- restoration of metal fences, entrance gates, balcony and terrace railings,
- cleaning pavement from tarnish, lichen and tire marks,
- refreshing retaining walls, exterior stairs and building plinths from atmospheric dirt.
- Workshop and garage
- sandblasting of steel and aluminum wheels before refinishing,
- cleaning the frames of motorcycles, bicycles, quads, all-terrain vehicles,
- preparation of automotive parts and machinery for powder coating or varnishing.
- Agriculture and construction
- cleaning of agricultural tools and machinery from rust and old paint (plows, harrows, cultivating units, trailers),
- renovation of steel structures, halls, containers, elements of industrial fences,
- removal of concrete and mortar residues from construction tools and formwork elements.
Compatibility of sandblasting lance 68500001A with Oleo-Mac washers
The kit is designed to work with selected models of Oleo-Mac high-pressure washers. Thanks to the factory fit, there is no need for additional adapters - just connect the lance to the gun.
Sandblasting lance 68500001A fits Oleo-Mac washers:
- PW121C - A compact washer for home users, ideal for lighter work around the house,
- PW135C - A higher-performance model popular with demanding hobby users,
- PW145 - A robust washer with a wide range of applications,
- PW170C - A powerful device for intensive work, such as cleaning pavers and facades,
- PW175 - A powerful washer for home and semi-professional use,
- PW190C - High-performance washer, a popular choice for service companies,
- PWX200C - model for the most demanding users, providing the highest performance.
If you own one of the above washers, the 68500001A lance will be a natural, factory-provided extension of functionality for it.
Technical data and product markings of the product SPRAYING LANCE 68500001A
The following summarizes the most important information and product designations relevant to ordering and verifying compatibility:
- Product name: SANDBLASTING LANCE 68500001A
- Purpose: sandblasting attachment for Oleo-Mac high-pressure cleaner
- Compatible washer models: PW121C, PW135C, PW145, PW170C, PW175, PW190C, PWX200C
- Type of work: wet sandblasting (mixture of water and abrasive)
- Design: metal lance with nozzle, brass connections, flexible hose for abrasive suction
- Manufacturer code / system code: 68500001A
- EAN code: 8026619035044
- Abrasive type: sand for sandblasting or other suitable abrasive matched by granulation to the nozzle (selected by the user depending on the application)
(Detailed parameters of the working pressure and the required water output should be selected in accordance with the instructions of the washer with which the lance will operate.)
How to safely and effectively use the sandblasting lance 68500001A?
To take full advantage of the potential of the sandblasting lance and at the same time ensure safety, it is worth following a few basic working rules:
- Abrasive selection - use only abrasive designed for sandblasting, with the granulation recommended for the type of surface. For more delicate work, choose a finer grit, for intensive rust or concrete removal - a coarser grit.
- Test on a small piece - before working on the entire surface, check the lance's operation on a small, not very visible part to choose the right distance and pressure and make sure that the substrate will not be damaged.
- Personal protective equipment - use safety goggles or visor, work gloves, work clothes, and, depending on conditions, a mask or half-mask filter respirator.
- Maintaining the right distance - do not bring the nozzle too close to the surface, especially with parts of lesser thickness or made of softer materials. Too short a distance can cause scratches or too deep a removal of material.
- Regular cleaning of the set - after work, rinse the hose and lance with clean water to remove residual sand and minimize the risk of nozzle clogging or accelerated wear of working components.
FAQ - frequently asked questions about the sandblasting lance 68500001A
1. Will the sandblasting lance 68500001A fit any pressure washer?
Not. This lance model was designed specifically to work with Oleo-Mac washers: PW121C, PW135C, PW145, PW170C, PW175, PW190C, PWX200C. For other devices, appropriate adapters are required, and compatibility should be verified in each case.
2. What kind of sand or abrasive can I use?
The most common is sand for sandblasting with appropriately selected granulation. The choice of abrasive depends on the type of surface and the intensity of cleaning - for more delicate work choose a finer grain, for removing heavy rust or concrete - a coarser grain. Avoid wet and contaminated materials that can clog the nozzle.
3. Will sandblasting with this lance damage delicate surfaces?
With the correct selection of pressure, distance from the substrate and the right abrasive granulation, the risk of damage can be minimized. However, it is recommended to perform a test in advance on an invisible part, especially for more delicate materials.
4. Do I need a special high-powered washer?
Lance 68500001A has been adapted to selected models of Oleo-Mac washers, which have sufficient parameters for effective sandblasting. The higher the operating pressure and water output of the washer, the faster and more effective the cleaning process, but the exact values should be checked in the technical documentation of the particular washer.
5. How to take care of a sandblasting lance to make it last as long as possible?
After each operation, rinse the lance and hose with clean water, remove any residual abrasive from the working elements, and store the set in a dry, clean place. Regular cleaning and avoiding working with contaminated or wet abrasive significantly prolongs the life of the lance and reduces the risk of clogged nozzles.
6. Does wet sandblasting produce a lot of dust?
Compared to traditional dry sandblasting, the use of water significantly reduces the amount of airborne dust. However, it is still necessary to use basic protective measures, as fine abrasive particles and material splatter may be present in the work zone.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.