GUIDE FOR LIMBING MACHINE 10" - 25 CM .3/8"X.050" 1,5 MM 61542010R
- Professional guide for 10" / 25 cm limbing machine 61542010R (.3/8 "x.050", 1.3 mm, 40 links) ideal for precision branch cutting. Durable steel, low vibration, high comfort and safety for work in the garden and orchard.
GUIDE FOR LIMBING MACHINE 10" - 25 CM .3/8 "x.050" 1.5 MM 61542010R - professional guide for precision tree care
GUIDE FOR LIMBING MACHINE 10" - 25 CM .3/8 "x.050" 1.5 MM 61542010R is a high quality work piece designed for trimmers and short bar chain saws. Ensures precise cutting of branches, high durability and safe operation in orchards, gardens and professional gardening companies. It is designed for users who require reliability, accuracy and comfort in tree care work - both at height and on the ground.
What is the guide for the 10" - 25 cm limbing machine?
The guide bar is a steel, precisely shaped piece on which the cutting chain slides. With the 10" (25 cm) long model, you get a compact, lightweight guide ideal for working in dense treetops, hard-to-reach areas and overhead branch care. The right guide bar is responsible for the stability of the chain guide, accuracy of the cut, less vibration and lower load on the engine of the machine.
Where to mount the guide 10" - 25 cm 61542010R?
The guide is mounted directly on the body of the limbing machine (or small saw), at the chain drive unit. It is attached to the so-called "foot" or bar holder, then attaches and tightens the cutting chain with the appropriate pitch and thickness of the guide link. The compact size of 25 cm makes the guide ideal for boom pruners, gardening equipment for working at height and anywhere where maneuverability and operator safety are important.
Application of the guide for the limbing machine 10" - 25 cm .3/8 "x.050" 1.5 MM 61542010R
The guide is designed primarily for:
- limbing branches of fruit and ornamental trees,
- tree care in orchards, vineyards, avenues and parks,
- pruning branches hanging over building roofs, alleys or fence lines,
- crown formation of trees, tall hedges and shrubs,
- preparation of firewood from finer branches.
Thanks to its short length and fit for fine pitch chain, the operation of this guide is stable and accurate, which significantly reduces the risk of kickback and improves the comfort of work, especially for less experienced users.
Guide for Oleo-Mac 10" - 25 cm limbing machine 61542010R - precise cutting in any tree crown
This guide is designed for maximum precision and safety when working at height. The short 10" (25 cm) length ensures excellent tool control and makes it easier to maneuver in dense treetops where longer guides become unwieldy. It's ideal for procedures such as removing dry branches, crown screening or gently correcting the shape of the tree.
1. Maneuverability and safety in hard-to-reach places
The compact size of the guide makes it easy to precisely steer the tip of the cutting set - crucial when working near buildings, windows, gutters or fence wires. Thanks to the short guide, the operator has better control over the limbing machine, which minimizes the risk of accidental damage to the environment. In practice, this means that you can safely cut branches over an arbor, car or greenhouse without worrying about uncontrolled "jerking" of the tool.
2. High accuracy in cutting branches and boughs
The 25 cm length is an ideal compromise between cutting capabilities and precision. Allows you to easily deal with most branches found in home gardens and orchards - from thin shoots to more robust branches. When shortening individual branches over the roof of a house, correcting the shape of ornamental trees or pruning fruit trees for harvesting, the user gets a clean, even cut that promotes proper wound healing on trees.
3. Comfort during longer gardening sessions
Shorter guide means less weight and lighter front end of the machine. This is a huge advantage when working with a limbing machine for long periods of time - the operator tires less, has a more stable grip and better control, resulting in higher precision and less muscle fatigue in the arms and shoulders. In practice, you can easily perform comprehensive maintenance of a tall tree or an entire avenue of trees without frequent interruptions.
Durable guide design 10" - 25 cm .3/8 "x.050" 1.5 MM - reliability in heavy use
Guide 61542010R is made of high-grade steel, providing resistance to abrasion, deformation and overheating during intensive operation. Proper selection of materials and precision workmanship translate into a long product life, even with frequent use in demanding field conditions.
1. Resistance to wear and deformation
Specially selected steel and heat-treating processes ensure that the guide groove retains its shape and the contact surface with the chain does not wear out quickly. In everyday practice - seasonal pruning of trees in the orchard, regular limbing of trees along roads, or maintenance of tall hedges - the guide retains its performance for a long time, reducing the need for frequent replacement.
2. Stable chain operation, less vibration
Carefully shaped groove and properly selected width work with the chain with the right parameters, which guarantees smooth sliding of the links and less vibration of the tool. This, in turn, affects the quality and repeatability of cuts, as well as the comfort of the operator - especially when working precisely overhead, such as when removing single, problematic branches over a fence line.
3. Lower failure rate of the entire cutting set
A well-designed and engineered guide bar reduces the risk of chain "popping", uneven chain tension or accelerated chain wear. As a result, the trimmer works more reliably, which is crucial when working from a lift, from a ladder or on a boom - that's when any breakdown or the need for frequent chain tensioning is particularly troublesome and time-consuming.
Technical parameters of the guide for the limbing machine 10" - 25 CM .3/8 "x.050" 61542010R
The following parameters allow you to correctly select the guide for a specific limbing machine and the appropriate cutting chain:
Trimmer guide:
- Guide length: 10" / 25 cm
- Chain pitch: .3/8''x.050''
- Guide link width: 1.3 mm
- Number of chain links: 40
- Purpose: tree trimmers and small chainsaws for tree care
- Product code: 61542010R
- EAN code: 8026619085339
Use of standard pitch .3/8''x.050'' and the width of the link 1.3 mm facilitates the selection of popular cutting chains available on the market. Number of cells 40 is crucial when buying or replacing a chain - so you can be sure that the kit will perfectly match the bar and drive of the limbing machine.
In practice, these parameters make the guide perfect for everyday gardening tasks: quick pruning of branches in the orchard, forming the crowns of young trees or keeping trees growing near buildings and fences in good condition.
Benefits for the user - why you should choose the 61542010R guide for your limbing machine?
Choosing the right guide has a direct impact on the comfort, safety and speed of work. Model 61542010R is designed to meet the expectations of demanding users - both professionals and garden owners who value high quality and reliable equipment.
1. Compatible with popular chains and trimmers
The standard parameters used - popular pitch, link width and number of links - allow the guide to easily fit many models of trimming machines with similar specifications. This is especially important if you want to quickly restore your equipment after the old guide is worn out or damaged, without a long search for dedicated parts.
2. Time saving and high work efficiency
Effective lubricating oil drainage, well guided chain groove and stable operation make cuts faster and with less effort. In practice, you can quickly trim the entire line of trees at the entrance to the property, clean up the orchard after the season, or prepare branches for shredding or use as firewood.
3. Higher level of safety when working at height
Compact length and stable chain guidance reduce the risk of jams and bounces. This is crucial when working from a lift, boom or ladder, where any uncontrolled movement of the tool can be dangerous. With this guide, the operator can focus on precise blade positioning and cutting control, instead of fighting unpredictable equipment behavior.
FAQ - Frequently Asked Questions about the 10" - 25 CM Trimmer Guide 61542010R
Question 1: For which devices this guide fits?
The guide bar is designed for trimming machines and small saws working with pitch chains .3/8''x.050'', guide link width of 1.3 mm and number of 40 links. Before you buy, it's a good idea to compare these parameters with the manual of your trimming machine.
Question 2: What chain should I use with this bar?
Use a pitch chain .3/8''x.050'', a link width of 1.3 mm and a number of 40 links. A chain selected in this way will ensure correct tension, smooth operation and complete safety of use.
Question 3: Is the 10" guide suitable for cutting thick logs?
The 10" (25 cm) model is mainly designed for limbing and cutting branches. For regular cutting of thick logs, longer guides are recommended. However, if necessary, it can be used to cut smaller trunks or branches - especially in the home garden.
Question 4: How to take care of the slide to serve as long as possible?
The key is to use the right oil to lubricate the chain, regularly clean the bar groove of chips and debris, and periodically rotate the bar (up/down) so that it wears evenly. It is also worth taking care of the correct chain tension.
Question 5: Is the installation of this guide complicated?
Installation of the guide is simple and follows the instructions of the limbing machine: remove the side cover, place the guide on the pin, put the chain on the sprocket and the groove of the guide, then set the correct tension and install the cover. After tightening the screws, check the chain tension again.
Question 6: Is guide 61542010R suitable for professional use?
Yes, the robust design and popular technical parameters make the guide will work well in the hands of the amateur user, as well as in the hands of gardening or service companies that regularly perform work on the care of trees and green spaces.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.