NOZZLE FOR BV300/BV270/BV162 56552002A
- Genuine nozzle for BV300, BV270, BV162 blowers 56552002A increases blowing power and precision. Profiled tip concentrates airflow, accelerates cleaning of leaves, grass and dirt. Durable plastic, easy installation, full compatibility. Ide
AIRBlower nozzle for BV300/BV270/BV162 56552002A - original blower nozzle for maximum efficiency and precision operation
Specially profiled blower nozzle, increases the efficiency and precision of the blower operation.
Nozzle for BV300/BV270/BV162 56552002A is a dedicated, profiled nozzle designed for use with BV300, BV270 and BV162 series garden blowers. Its task is to concentrating the air flow, increasing its speed and allowing the blowing to be directed precisely where it is needed. This makes cleaning leaves, small twigs, grass or dirt from hard-to-reach places faster, more convenient and much more efficient.
The original nozzle 56552002A is made of durable plastic, resistant to mechanical damage and typical working conditions in the garden - moisture, dirt or UV rays. It is the perfect complement to the blower, allowing you to use it to its full potential and extend the life of the unit through proper factory fit of components.
What is the BV300/BV270/BV162 56552002A blower nozzle and why you should use it?
The nozzle for BV300/BV270/BV162 56552002A is a specially shaped outlet tip, mounted on the pipe of the garden blower. Its shape is designed to increase the speed and direction of the airflow. Instead of dispersing the air over a large area, the nozzle concentrates it into a single, more compact and stronger stream.
The use of the nozzle means tangible benefits for the user:
- Increased blowing power - concentrated airflow moves wet leaves, small twigs or gravel more easily.
- Precision work - it is possible to thoroughly clean corners, crevices, spaces near curbs, walls and fences.
- Saving time and energy - you will do the same cleaning work faster, using less strength and often using the device for less time.
This solution will be especially appreciated by users who use the blower not only occasionally, but regularly - in the home garden, on a company property, parking lot, maneuvering area or around public buildings.
Installation of nozzle 56552002A on BV300/BV270/BV162 blower - fast, secure and without tools
The 56552002A nozzle was designed as an an original accessory item for BV300, BV270 and BV162 blowers. This means that it is fully compatible with the tailpipe of these models and installs easily according to the factory mounting system.
Where the nozzle is mounted? The element is applied directly to the end of the blower discharge pipe. Depending on the design of the device, this can be:
- slip on pipe with the use of latches or guides,
- pressing and locking in the right place through a system of clicks.
Under typical conditions, installation literally takes a moment and requires no tools. Properly inserted nozzle does not rotate or slide during operation, so the user has full control over the direction of blowing.
Practical examples of the use of a correctly installed nozzle:
- Clearing the driveway of leaves and sand - the air stream precisely "sweeps" the dirt to the desired location.
- Removal of leaves from the flowerbeds without raising excessive soil - it is easier to control where it falls the strongest blowing.
- Blowing dirt out of gaps in paving stones or between paving slabs - the concentrated stream brings dirt out into the open.
Use of BV300/BV270/BV162 blower nozzle - tidiness in the garden, on the driveway and around the house
The nozzle for BV300/BV270/BV162 56552002A expands the functionality of the blower, making it a a versatile tool for outdoor cleaning. With a suitably narrow air outlet, it is ideal for situations where both power and accuracy are needed.
Typical applications in the garden and around the house:
- Blowing off leaves from the lawn, terrace, paths and stairs - even wet or compacted leaves are easier to move to one place.
- Removal of cut grass from the driveway, sidewalks and edging after mowing - ensuring an aesthetically pleasing finish to the gardening work.
- Garage and shed cleaning - Instead of sweeping, you can quickly blow dust, sand and leaves outside.
Application at commercial and public facilities:
- Maintain cleanliness of parking lots and alleys in front of stores, office buildings, warehouses.
- Removal of dirt from footpaths near schools, offices, hotels or restaurants.
- Tidying up green areas in service companies, housing communities or housing estates.
Thanks to its profiled nozzle, one blower can effectively replace many traditional cleaning tools such as brooms, rakes and brushes, especially on larger areas.
Nozzle for BV300/BV270/BV162 56552002A - quality, durability and reliability in daily use
When you choose a genuine blower nozzle, you are investing in a a proven solution designed specifically for specific equipment models. This way you can be sure that the component will be perfectly matched, and its performance - fully in accordance with the manufacturer's assumptions.
The most important quality advantages of the nozzle 56552002A:
- Resistant plastic - does not break easily, does not deform under typical loads and is weather resistant.
- Precise profiling - The shape of the tip has been refined to achieve the most effective, targeted airflow possible.
- Secure installation - Stable mounting minimizes the risk of accidentally slipping the nozzle during operation.
Examples of daily use in which you will appreciate the durability of the nozzle:
- Regular cleaning of the garden throughout the season - from spring cleaning to intensive autumn leaf harvesting.
- Service work at company sites where the blower is used frequently and by many users.
- Use in demanding conditions - for example, when cleaning up after minor renovations outdoors, where dust and small pebbles float in the air.
Key features and benefits of the nozzle for BV300/BV270/BV162 56552002A
- Dedicated to specific models - Full compatibility with BV300, BV270 and BV162 blowers.
- Specially profiled shape - Increased efficiency and precision of blower operation.
- Durable plastic - resistance to mechanical damage and weather conditions.
- Easy installation - fast attachment without additional tools.
- Improving work comfort - Less operator fatigue, faster cleanup work.
These features make the 56552002A nozzle a practical and cost-effective addition to any BV300, BV270 or BV162 blower - whether in the hands of a private user or a professional caring for larger sites.
Technical and identification data of the nozzle for BV300/BV270/BV162 56552002A
- Purpose: nozzle / outlet tip for garden blower
- Compatible models: BV300, BV270, BV162
- Catalog number / manufacturer code: 56552002A
- EAN code: 8026619026851
- Material: durable plastic (damage- and weather-resistant type)
- Design: specially profiled, tapered tip to increase airflow speed
- Color: shade of gray (blends well with the body of the blower)
- Assembly: on the discharge pipe of the blower, without the use of tools
- Application: cleaning work outside - garden, driveway, terrace, sidewalks, parking lots, company areas
The above information makes it easier to correctly identify parts and select the right accessory for your blower. Before you buy, it is a good idea to compare the model designation of the device and the part number of the nozzle.
FAQ - frequently asked questions about the nozzle for BV300/BV270/BV162 56552002A
1. Does the nozzle 56552002A fit all versions of the BV300, BV270 and BV162 blowers??
Yes, the nozzle was designed as an original accessory for BV300, BV270 and BV162 series blowers. If in doubt, it's a good idea to check the model designation on the unit's nameplate and compare it with the product description.
2. Do you need special tools to install the nozzle?
No, the installation of the nozzle is usually done without tools - just put it on the blower discharge pipe according to the manufacturer's instructions until it is felt to snap or lock in place.
3. How to take care of the nozzle so that it serves for as long as possible?
After finishing work, it is a good idea to clean the nozzle from wet leaves, grass residue or sand and to store the device in a dry place, away from intense sunlight and heat sources. Periodic wiping from dirt will keep the tip permeable and the blowing performance constant.
4. Does using this nozzle actually increase the power of the blower?
The nozzle does not increase the engine power of the device, but thanks to its specially profiled shape concentrates the air stream, which in practice gives a perceptibly higher blowing power at the workplace. This means more efficient blowing off of dirt.
5. Can the blower be used without this nozzle?
Yes, the blower can also work without an additional nozzle, but the use of a dedicated nozzle significantly improves the precision and efficiency of cleaning, especially in hard-to-reach areas and on larger hardened surfaces.
6. Is the nozzle resistant to mechanical damage?
The nozzle is made of durable plastic, resistant to the typical stresses of garden use. However, like any plastic component, it requires avoiding intentional impacts or crushing, which will prolong its life.
7. Is the product an original spare part?
Yes, the nozzle 56552002A is an original part designed to work with BV300, BV270 and BV162 blowers, which guarantees full compatibility and fit with the device.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.