OLEO-MAC PPXI530 56V CORDLESS PRUNING MACHINE 54349001
- Oleo-Mac PPXi 530 56V cordless lopper 54349001 is a telescopic boom saw for cutting branches over 5 m. Brushless motor, 30 cm guide, lightweight design, no exhaust, ideal for garden and orchard.
OLEO-MAC PPXI530 56V CORDLESS PRUNING MACHINE 54349001 - PROFESSIONAL PRUNING OF BRANCHES WITHOUT EFFORT AND LADDER
Oleo-Mac PPXi 530 cordless pruning machine - what it is and who it was made for?
Oleo-Mac PPXi 530 56V cordless pruning machine 54349001 is a modern, telescopic device for safe and convenient pruning of branches at height, from ground level. Combines professional-grade power with the comfort typical of battery-powered equipment - no fumes, no cables and minimal service requirements. It will be perfect in the hands of the discerning private user, as well as in companies engaged in landscaping, horticulture and gardening services.
The machine operates on a 56-volt system using powerful lithium-ion batteries (4.0 Ah or 2.5 Ah), which ensure long operating time and full mobility. The trimmer shares the same mechanical components with the well-established, diesel-powered version of the PPX 275, offering identical cutting performance while offering higher operating culture, less noise and zero emissions.
The device is equipped with an adjustable telescopic boom, so you can easily reach branches over 5 meters high, without the use of ladders or lifts. This greatly increases safety and significantly reduces the time it takes to get the job done - especially in gardens with tall trees, orchards, parks and areas around single-family homes.
Where the Oleo-Mac PPXi 530 trimming machine is installed and how it is operated? The limbing machine is a complete, self-contained unit - it does not need to be mounted on another drive or multifunction machine. Simply insert the appropriate 56-volt battery into the socket, lock it in place with the latch, check the chain lubrication oil level, and you can start working at the touch of a "Start" button. All controls are placed within easy reach of the operator's hand, and an intuitive control panel indicates battery status and any warning messages.
The use of the Oleo-Mac PPXi 530 cordless pruning machine:
- pruning of dry and green branches of ornamental and fruit trees,
- crown formation of trees in home and residential gardens,
- maintaining safety around the property - removing branches that threaten fence lines, roof, wires,
- care of trees along alleys, walkways and driveways,
- work in orchards - rejuvenation pruning and sanitary pruning of damaged branches,
- maintenance of tree stands in resorts, hotels, parks and recreational areas.
Pasted into the description is the manufacturer's description:
PPXi 530HL cordless pole pruning machine
BATTERY AND CHARGER NOT INCLUDED.
Technical specifications:
| Battery data | Li-Ion (4.0 Ah or 2.5 Ah/56 V) |
| Charging time | up to 45min for 4.0Ah and 35min for 2.5Ah (from zero to 100%) |
| Engine type | inductive |
| Weight | 6.2 kg (without guide bar and battery) |
| chain (pitch x width) | 1/4" x .043" |
| Guide length | 30 cm / 12" |
| Total length of the device | 2.65m / 3.85m (when the telescope is extended) |
| Working time | 85 to 125 cuts (with a 4.0 Ah battery) / and 55 to 80 cuts (with a 2.5 Ah battery) |
Oleo-Mac PPXi 530 - high cutting performance and long time in the garden
At the heart of the Oleo-Mac PPXi 530 pruning machine is a brushless induction motor, which guarantees high power, adequate torque and very good operating culture. No brushes means less wear and tear, higher efficiency and longer life of the entire drive. This makes the device ready for heavy use for many seasons.
The cutting blade is set on a 30 cm (12") long guide bar, cooperating with precision pitch chain 1/4" x .043". This combination ensures fast, clean and precise cutting - both of thin and thicker branches. In practice, this translates into fewer work movements, shorter working hours and less operator fatigue.
56 V lithium-ion battery in the version 4.0 Ah allows you to make 85 to 125 cuts per charge, depending on branch diameter and working conditions. Lighter battery 2.5 Ah gives the possibility to make 55 to 80 cuts, which is enough for most standard tasks in a home garden. Fast charging (up to 45 min for a 4.0 Ah battery and up to 35 min for a 2.5 Ah battery - from 0 to 100%) allows you to plan your work efficiently, even with heavy use.
Examples of daily applications:
- several hours of spring cutting of fruit trees in the orchard - without having to carry fuel and mix,
- regular removal of offshoots and dry branches in high hedges and along walking paths,
- cleanup work after windstorms - quick removal of broken branches over a driveway or terrace.
Telescopic boom 2.65-3.85 m - safely reach above 5 meters
One of the key advantages of the Oleo-Mac PPXi 530 cordless pruning machine is its adjustable telescopic boom. The total length of the device is 2.65 m in the folded position and as much as 3.85 m when fully extended. Combined with the operator's height, this makes it possible to cutting branches located at a height of more than 5 meters, without having to climb a ladder.
The lack of need for ladders, hoists or other lifting equipment is not only a convenience, but above all a a huge increase in work safety. The operator remains stably on the ground, and the risk of falling from height is virtually eliminated. This is especially important for individual users who do not have specialized equipment for working at height.
The boom is lightweight, rigid and very well-balanced, so that the limbing machine remains stable both at short and maximum extension. This allows you to precisely guide the guide among dense tree crowns without accidentally damaging healthy branches.
Examples of daily applications:
- cutting branches over the car driveway so they do not scratch the roof of the vehicle,
- crown molding over a terrace or gazebo, without having to set up bulky ladders,
- removal of branches obscuring light from the windows on the first floor of the building.
Convenience, safety and intuitive operation of the Oleo-Mac PPXi 530 56V cordless pruning machine
The Oleo-Mac PPXi 530 pruning machine is designed for maximum user convenience. Light weight - 6.2 kg (without guide bar and battery) and ergonomic handle make work less tiring, even for longer sessions. The balance of the device has been refined so that the center of gravity falls as close to the operator as possible, making it easier to maneuver the tool overhead.
The electric motor runs much quieter than internal combustion counterparts, which is especially noticeable in dense housing or on single-family housing estates. Lower noise levels and the absence of vibrations typical of internal combustion engines make work more comfortable and less stressful for the operator.
The machine is equipped with easy to read control panel on the boom, which allows the trimmer to be quickly switched on or off, as well as checking the battery status and any warning messages. Safety system protects the user and the device from accidental start-up and overloading of the drive.
Examples of daily applications:
- work in the early morning or late afternoon, when low noise levels are of great importance to neighbors,
- trimming branches over a playground or rest area - without polluting the air with exhaust fumes,
- operation by people who have no experience with petrol chainsaws, but want to take care of a tall stand themselves.
Oleo-Mac quality, durability and reliability - an investment for years to come
The Oleo-Mac brand is associated with professional landscaping equipment, and the PPXi 530 model is no exception. The trimmer uses mechanics known from the diesel model PPX 275, which has been proven time and again in harsh working conditions. Robust gearbox, durable bearings and high quality materials used in production guarantee long trouble-free operation.
The housing, handles and covers are made of durable plastics and metal alloys, resistant to mechanical damage and weathering. The well-thought-out design makes it easy to service and perform regular maintenance such as cleaning, chain lubrication and bar replacement.
The induction motor and control electronics are protected against overheating and overloading. This means that the limbing machine will automatically respond in extreme situations, protecting the drive from damage and extending its service life.
Examples of daily applications highlighting reliability:
- multi-year operation in an orchard or horticultural company, with regular seasonal maintenance,
- working in variable weather conditions - from early spring to late autumn,
- intensive use during cleanup after strong winds and storms.
Technical specifications of Oleo-Mac PPXi 530 56V cordless pruning machine
- Model: Oleo-Mac PPXi 530, code 54349001
- Type of device: battery powered pole pruner (telescopic)
- Supply voltage: 56 V
- Battery type: Li-Ion, capacity 4.0 Ah or 2.5 Ah (selectable)
- 4.0 Ah battery charging time: up to 45 minutes (0-100%)
- Charging time of the 2.5 Ah battery: up to 35 minutes (0-100%)
- Engine type: inductive (brushless)
- Guide length: 30 cm / 12"
- Chain: 1/4" x .043"
- Range of total length of the device: 2.65 m / 3.85 m (when the telescope is extended)
- Mass: 6.2 kg (without guide bar and battery)
- Estimated operating time: 85 to 125 cuts (4.0 Ah battery) / 55 to 80 cuts (2.5 Ah battery)
- Purpose: pruning of branches at height, care of trees in gardens, orchards and green areas
- Standard equipment: pole trimmer, guide bar, chain
- Attention: battery and charger are not included - to be purchased separately.
Why you should choose the Oleo-Mac PPXi 530 56V Cordless Trimmer 54349001?
When you choose the Oleo-Mac PPXi 530 cordless pruning machine, you are investing in a piece of equipment that combines top-quality workmanship, full mobility and safe use. This is an ideal solution for people who want to take care of the tall trees in their surroundings by themselves and professionally, without having to hire external teams.
Key user benefits:
- security - Working from the ground, without the use of ladders and lifts,
- convenience - Quiet operation, no exhaust fumes, little vibration and an ergonomic handle,
- high performance - Up to 125 cuts per charge, a 30 cm guide bar and a fine pitch chain,
- durability - Proven components known from the combustion model, solid construction,
- saving time and money - No need to purchase fuel, spark plugs or mixture oil, less maintenance,
- versatility - use in home gardens, orchards, parks, urban and commercial green spaces.
FAQ - Frequently asked questions about Oleo-Mac PPXi 530
1. Are the battery and charger included with the Oleo-Mac PPXi 530 trimming machine?
Not. The pruner is sold without battery and charger. They must be purchased separately - depending on your needs, you can choose a 4.0 Ah battery (longer run time) or a 2.5 Ah battery (lower set weight).
2. How high can you reach with the PPXi 530 limbing machine?
The total length of the device when the telescope is extended is approx. 3,85 m. Combined with the height of the operator, this allows convenient cutting of branches at a height of more than 5 meters, without climbing a ladder.
3. How many cuts will I make on a single battery charge?
With a 4.0 Ah battery, an approximate 85 to 125 cuts can be made, while with a 2.5 Ah battery, 55 to 80 cuts can be made. The exact number depends on the diameter and type of branches to be cut and the style of the operator.
4. How long does it take to charge the battery?
The 4.0 Ah battery charges to full (0-100%) in up to approx. 45 minutes, and the 2.5 Ah battery - up to approx. 35 minutes. This allows you to conveniently plan your garden work even with heavy use.
5. Is the Oleo-Mac PPXi 530 pruning machine suitable for professional use?
Yes. The mechanics of the device are based on the proven PPX 275 diesel model, which guarantees high durability and reliability. The delimbing machine will be great for gardening and orchard companies, as well as for professional landscaping maintenance.
6. What personal protective equipment should the operator use?
While working, it is recommended to use safety goggles or visor, work gloves, footwear with non-slip soles and hearing protectors. In addition, anti-sweat pants or leggings are advisable, especially for heavy use.
7. Does the trimming machine require complicated maintenance?
Not. The basic steps are regular refilling of chain lubrication oil, periodic cleaning of the bar and chain, checking their tension, and cleaning the housing of chips and dirt. No internal combustion engine means no need to change plugs, filters or prepare fuel mixture.
8. What tasks the Oleo-Mac PPXi 530 is best suited for?
The pruning machine is ideal for the care of tall ornamental and fruit trees, removal of dry and dangerous branches, crown molding, cleanup work after windstorms, and maintaining order around residential and commercial buildings.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.