OLEO-MAC FAST CRG- 40V CHARGER - FAST 54030018
- Oleo-Mac FAST CRG-40V Charger 54030018 - fast, professional charger for Li-Ion Bi 40 V batteries. Express charging (Bi 2.0 Ah in approx. 40 min, Bi 5.0 Ah in approx. 90 min), temperature and voltage control, wall mounting. Ideal for garden tools
OLEO-MAC FAST CRG-40V CHARGER - FAST, PROFESSIONAL CHARGER FOR Li-Ion 40 V BATTERIES
OLEO-MAC FAST CRG-40V CHARGER - FAST 54030018 is a professional high-speed mains charger designed to charge Bi - 40V lithium-ion batteries used in modern Oleo-Mac rechargeable devices. It provides instant replenishment, a high level of safety and full protection of the battery in all working conditions - both in the home garden and in intensive, semi-professional use.
The charger is designed to charge Bi - 40 V lithium batteries
Charging time from zero to 100% is 40 min for Bi 2 Ah and 90 min for Bi 5.0 Ah.
The charger constantly monitors the temperature and voltage of each cell during the charging cycle to prevent damage to individual cells.
Weight: 1 kg
Technical specifications:
| Battery data | 1.5 Ah x 2 |
| Rated power | 150 W |
| Maximum power | 300 W |
| Engine | commutator |
| Charging time | up to 3 h |
| Voltage | 18 V rated; 21 V maximum |
| chain (pitch x width) | 1/4 "(6.35) |
| Guide length | 15 cm - 6" |
| Weight | 1.6 kg (without battery), 0.6 kg (battery) |
| Working time | approximately 30 min |
| Weight with battery | 2.2 kg |
What is the Oleo-Mac FAST CRG-40V fast charger 54030018?
Oleo-Mac FAST CRG-40V charger is a high-quality charging station dedicated to Bi - 40 volt lithium-ion batteries used in Oleo-Mac's range of cordless equipment such as trimmers, lawnmowers, hedge trimmers and chainsaws. This is a "FAST" mains charger, specifically designed to get your equipment back up and running quickly, while maintaining maximum battery life.
The device has easy-to-read LEDs indicating charging status and an electronic temperature and voltage control system. This allows the charger to independently adjust the charging parameters to the current state of the battery, which minimizes the risk of overcharging and overheating the cells. This is especially important for users who value the reliability and long-term performance of the entire battery system.
In practice, this means that when you connect a Bi 2.0 Ah battery to the Oleo-Mac FAST CRG-40V charger, you get a full charge in just about 40 minutes, and in the case of the capacious Bi 5.0 Ah battery - in about 90 minutes. This is a huge time-saver, which is important both in professional work and for intensive use in the garden or allotment.
Where the Oleo-Mac FAST CRG-40V charger is mounted and how to use it on a daily basis?
The Oleo-Mac FAST CRG-40V loader is designed so that it can be conveniently placed on a work surface, shelf in the garage or workshop, as well as hung on the wall. The underside of the case is equipped with special keyhole mounting brackets that allow the charger to be quickly suspended from screws or hooks screwed into the wall. Such a solution allows you to organize your charging station in a convenient and safe way, without tangled wires and without the risk of accidentally knocking the charger down from a height.
To start charging, simply:
- plug the charger plug into a standard 230-volt power outlet,
- insert the Bi - 40 V battery into the charger socket, making sure that the terminals are properly aligned,
- check the indicator lights for information on the start of the charging process, charging status and any errors.
In a home environment, the charger will work best in a dry, ventilated room - in a garage, basement, workshop or tool storage room. In professional applications, a permanent charging point can be set up in the back office of a gardening company, municipal utility or landscaping company, where many batteries are charged daily.
Examples of daily applications:
- Home and Garden: charging the batteries for the mower and trimmer after finishing mowing the lawn - in the morning the equipment is ready to work again.
- Recreational plot: quickly recharge the chainsaw battery while preparing firewood.
- Gardening services: continuous rotating charging of several batteries while the team is working in the field, which guarantees uninterrupted operation of the tools throughout the day.
Use of Oleo-Mac FAST CRG-40V charger - reliability in the use of rechargeable tools
The FAST CRG-40V charger is a key component of the entire Oleo-Mac battery system. Enables the efficient operation of a wide range of cordless equipment that replaces the classic diesel or corded machines. It is dedicated to users who value convenience, no exhaust fumes, low noise and ease of operation.
Typical areas of application of the loader:
- Garden work: battery power for mowers, trimmers, hedge trimmers, garden blowers or cordless saws.
- Maintenance of green areas: ideal for cleaning crews, urban gardeners, park and estate maintenance companies - quick recharges between jobs.
- Work around the house and on the plot: cutting branches, shaping hedges, preparatory work before the heating season - thanks to quick charging, you can make the most of your working day.
All this makes the Oleo-Mac FAST CRG-40V charger not just an accessory, but an essential power center for anyone investing in the brand's battery system.
Key advantages of the Oleo-Mac FAST CRG-40V loader - speed, safety and durability
When you choose the Oleo-Mac FAST CRG-40V loader, you are investing in a solution that has been designed for years of intensive use. The most important benefits for the user are:
1. Extremely fast battery charging
- The Bi 2.0 Ah battery has a full charge time of about 40 minutes - this means that after a short break you can return to work with a fully operational device.
- For the larger Bi 5.0 Ah battery, the charging time is about 90 minutes - ideal for longer jobs when high battery capacity is required.
- Loading speed translates into greater productivity - instead of waiting for hours, you can schedule tasks with virtually no downtime.
2. Advanced battery protection
- The charger continuously monitors the temperature and voltage of each battery cell to prevent overheating and overcharging.
- Built-in electronics automatically adjust the charging current to the state of the battery - especially important with deeply discharged batteries.
- Thanks to the controlled charging process, the batteries retain their capacity and efficiency for a longer period of time, which in practice reduces the operating costs of the entire system.
3. Robust, ergonomic design
- Compact yet stable housing makes it easy to place the charger on any flat surface.
- Wall-mounting capability saves space in the workshop and provides better work organization.
- With a light weight of about 1 kg, the loader can be easily transported between jobsites - ideal for mobile teams.
Oleo-Mac FAST CRG-40V Battery Charger 54030018 - the perfect addition to your tool kit
The FAST CRG-40V 54030018 is designed to work best with Bi - 40 V series batteries, providing the optimum compromise between charging speed and cell life. In practice, this means that you can rely on your cordless tool kit even in demanding conditions - without worrying about premature battery wear or long charging intervals.
The charger will be perfect in the hands of an individual user who needs a reliable source of energy for work around the house, as well as in a service company serving many customers daily. Its versatility and high quality workmanship translate into real savings in time and money.
Thanks to the use of Bi - 40V lithium-ion batteries and FAST CRG-40V fast charger, working with Oleo-Mac tools becomes lighter, quieter and more environmentally friendly compared to traditional internal combustion machines.
The most important technical data of the Oleo-Mac FAST CRG-40V loader
- Purpose: charging of lithium-ion batteries Bi - 40 V
- Bi 2.0 Ah charging time: about. 40 min (from 0 to 100%)
- Bi 5.0 Ah charging time: about. 90 min (from 0 to 100%)
- Control system: constant monitoring of temperature and voltage in each cell
- Charger weight: about. 1 kg
- Mounting capability: standing operation or hanging on the wall (mounting holes in the housing)
- Power supply type: mains 230 V AC
The additional parameters listed in the table (power, run times, weight with battery) refer to a typical battery tool set working with this charger and illustrate the potential of the entire system.
Why choose the Oleo-Mac FAST CRG-40V loader for your garden and business?
- A brand with experience: Oleo-Mac is a well-established manufacturer of gardening equipment, whose equipment is valued by home users and professionals alike.
- System Compatibility: one charger supports the entire range of rechargeable devices Bi - 40 V - you only need one or two batteries to power several machines.
- Time savings: fast charging cycles allow you to plan your work efficiently and avoid downtime.
- Safety and battery protection: advanced charger electronics take better care of cells than simple, low-quality universal chargers.
- Convenience of use: sturdy housing, wall-mounting capability, easy-to-read charging status lights - all of which make daily operation easier.
FAQ - frequently asked questions about the Oleo-Mac FAST CRG-40V loader
1. Which batteries can be charged with the Oleo-Mac FAST CRG-40V charger?
The charger is designed to charge lithium-ion batteries of Bi - 40 V series used in Oleo-Mac rechargeable devices. For these batteries, it provides optimal charging performance, safety and long life.
2. How long does it take to fully charge the battery?
Using the FAST CRG-40V charger, the charging time from 0 to 100% is about 40 minutes for a Bi 2.0 Ah battery and about 90 minutes for a Bi 5.0 Ah battery. Actual time may vary slightly depending on ambient temperature and battery discharge rate.
3. Can the charger be mounted on the wall?
Yes. The case of the charger is equipped with special mounting holes for convenient hanging on the wall. This allows you to organize a permanent charging station in your garage, workshop or utility room.
4. Does the charger turn itself off when the battery is charged?
The charger continuously monitors the voltage and temperature of the cells. When a full charge is reached, it limits the charging process, protecting the battery from overcharging. It is safe to leave the battery in the charger after the cycle is complete, but it is recommended to disconnect it after a full charge, if possible.
5. Is the charger suitable for professional use?
Yes, the Oleo-Mac FAST CRG-40V charger is designed for heavy use. Fast charging, high quality workmanship and a battery protection system make it ideal for gardening companies, municipal services and anywhere equipment works many hours a day.
6. What is the weight of the charger?
The loader weighs about 1 kg, making it light enough for easy carrying, yet stable for use on a workbench or shelf.
7. Does the charger require special maintenance?
The charger does not require complicated maintenance. All you need to do is periodically wipe it clean of dust with a dry, soft cloth, keep the vents clear, and avoid working in very humid environments. Regular inspection of the power cord for mechanical damage will increase the safety of use.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.