GSH 400 CHAINSAW AIR FILTER 50330082R
- GSH 400 chainsaw air filter 50330082R effectively protects the engine from dust, sawdust and debris. Provides full power, easy starting, lower fuel consumption and longer life of the chainsaw for intensive work. Ideal for GSH 400.
GSH 400 chainsaw air filter 50330082R - reliable engine protection for your chainsaw
The air filter for the GSH 400 chainsaw, designation 50330082R, is a high-quality consumable component designed to effectively clean the air drawn into the combustion engine. Thanks to it, only clean air, free of dust, dirt and small chips, enters the combustion chamber, which translates into stable operation of the chainsaw, lower fuel consumption and definitely longer life of the drive unit.
GSH 400 air filter
The presented air filter is designed for GSH 400 chainsaw. It is made of durable filter materials embedded in a sturdy, damage-resistant plastic housing. The filter design ensures optimal airflow while capturing debris very efficiently, so the saw retains full power even during intensive work in difficult terrain conditions.
What is the GSH 400 50330082R chainsaw air filter and why is it so important?
GSH 400 chainsaw air filter 50330082R is a specialized filter element installed in the intake system of a petrol chainsaw. Its primary function is to clean the intake air of particulate matter - wood dust, dust, fine filings and sawdust residues generated during wood cutting. Without an effective filter, these contaminants would enter the cylinder, causing accelerated wear of the piston rings, cylinder and carburetor.
In practice, this means a regularly changed air filter:
- protects the engine from premature wear and costly repairs,
- provides consistent, high power to the GSH 400 chainsaw,
- helps reduce fuel consumption with the right fuel-air mixture ratio,
- makes it easy to start the device even after a long break.
The use of an original or fully compatible 50330082R air filter is especially important for those who use their chainsaws professionally - in construction companies, forestry services, farms or intensive gardening work, where the tool works often and for long periods of time and the risk of dust is very high.
Installation of air filter 50330082R in GSH 400 chainsaw - fast and without tools
The 50330082R air filter is designed specifically for the GSH 400 chainsaw, making installation simple and taking just a few minutes. It is located in the filter chamber under the top cover of the saw, directly above the carburetor. The exchange takes place in practice in several steps:
- Turn off the chainsaw, wait for the engine to cool down and disconnect the spark plug for safety.
- Unscrew or unscrew the top cover of the GSH 400 saw housing.
- Remove old, dirty air filter.
- Clean the filter chamber of loose debris (e.g., with compressed air or a brush).
- Insert the new air filter 50330082R, fitting it into the mounting slot.
- Close the cover and make sure it is properly fastened.
Thanks to the appropriately designed shape and precise mounting hole, the filter stably adheres in the housing, does not move and does not allow unfiltered air to enter the side. The user does not need specialized tools, so the replacement can be carried out both in the workshop and directly in the field - for forestry or construction work.
Examples of situations where ease of installation is critical:
- during all-day logging operations - when the filter needs to be cleaned or replaced in the middle of the day,
- when cutting firewood in the backyard, where the user does not have access to full workshop equipment,
- in service companies that service several saws at the same time and need a quick, repeatable filter replacement procedure.
Use of the GSH 400 50330082R air filter in daily operation
GSH 400 air filter 50330082R is used wherever the GSH 400 chainsaw works in high dust conditions. It works well in the hands of both private users and professionals who rely on the reliability of their tools every day.
Typical application areas:
- Garden and household work - pruning branches, preparing firewood, restoring fruit trees, cleaning up the plot after storms.
- Forestry work and professional felling - intensive cutting of trunks and branches, working in an environment full of sawdust and fine chips, where the filter must cope with a large amount of dust.
- Building and construction work - cutting wooden structures, rafters, beams and planks on construction sites, where floating dust requires particularly efficient filtration.
Regularly changing the air filter in these applications keeps the saw in top working order, which translates into faster job completion, safer operation and lower equipment operating costs.
Quality, durability and reliability of the GSH 400 chainsaw air filter
The 50330082R air filter for the GSH 400 chainsaw is designed to withstand operation in very demanding environmental conditions. The filter material resistant to moisture and temperature fluctuations retains its properties for a long time, and the rigid plastic housing effectively protects the cartridge from mechanical damage.
User benefits:
- Longer engine life - Clean air means less friction and slower wear on moving parts.
- Stable power and easy start-up - Adequate air flow allows the carburetor to maintain the correct fuel mixture, which translates into the full power of the chainsaw.
- Saving time and money - Less frequent repairs, less risk of failure during operation, and shorter service downtime.
For the user, this means the confidence that the GSH 400 saw will be ready to go whenever you need it - without the risk of a sudden drop in power or firing problems after a prolonged shutdown. Such features are especially important for service companies that cannot afford equipment downtime during the season.
Key features and benefits of the GSH 400 air filter 50330082R
- Dedicated to GSH 400 chainsaw - perfect fit, secure installation.
- Effective air filtration - protecting the engine from dust, sawdust and dirt.
- Stable design - resistant to vibration and damage during operation.
- Easy, quick replacement - no special tools required.
- Impact on power and operating economy - better combustion, lower fuel consumption.
- Suitable for intensive professional chainsaw use.
Product parameters - GSH 400 chainsaw air filter 50330082R
- Purpose: gSH 400 petrol chainsaw
- Part type: air filter (filter cartridge in a plastic housing)
- Product code / symbol: 50330082R
- Function: filtration of engine supply air, protection against contaminants
- Assembly: in the air filter compartment under the top cover of the chainsaw
FAQ - Frequently asked questions about GSH 400 50330082R chainsaw air filter
Question 1: How often should I change the air filter on my GSH 400 chainsaw?
Frequency of replacement depends on the intensity of work and dust level. For typical household work, it is recommended to check after a few hours of operation and replace every one to two seasons. In professional applications, with a lot of dust, the filter is worth checking daily and replacing much more often - even several times a season.
Question 2: Is it possible to clean the air filter instead of replacing it?
A lightly soiled filter can be gently cleaned of loose dirt, such as with compressed air or a soft brush. However, if the filter is heavily contaminated, clogged or damaged, it is essential to replace it. Using a worn-out filter for too long can lead to a decrease in the power of the chainsaw and accelerated wear of the engine.
Question 3: Does the 50330082R filter fit other models of chainsaws?
The filter was designed with the GSH 400 saw in mind. If you want to use it in another model, always compare the part designation and shape with the original filter and follow the recommendations of the device manufacturer. Using the wrong filter can cause leaks or improper air filtration.
Question 4: How to recognize that the air filter needs to be replaced?
Symptoms of a worn or clogged filter can include a decrease in the power of the chainsaw, difficulty getting into gear, higher fuel consumption, trouble with even idling, as well as a visible layer of dirt that prevents the free flow of air. In this case, it is best to install a new filter 50330082R right away.
Question 5: Can I do the installation of the air filter myself?
Yes, the installation of the air filter on the GSH 400 chainsaw is simple and requires no specialized tools. Just follow the instructions for the device: remove the cover, replace the filter with a new one 50330082R and reattach the housing. This is a quick activity that you can easily do yourself in the workshop or in the field.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.