SAW AIR FILTER GSH510-560 50310272AR
- Original Oleo-Mac GSH510-560 50310272AR air filter for GSH 51, 510, 56, 560 chainsaws. Effectively traps dust and sawdust, protects the motor, provides full power, easy installation and reliable operation in harsh conditions.
CHAINSAW AIR FILTER GSH510-560 50310272AR - ORIGINAL ENGINE PROTECTION AND MAXIMUM PERFORMANCE FOR YOUR CHAINSAW
GSH510-560 chainsaw air filter - what it is and why it is so important?
GSH510-560 50310272AR chainsaw air filter is an original intake system component used on Oleo-Mac GSH 51, GSH 510, GSH 56 and GSH 560 petrol chainsaws. Its task is to effectively stop dust, sawdust and fine dirt sucked in with the air to the engine. Thanks to a precisely selected filter structure, it ensures optimal combustion conditions of the fuel-air mixture, which translates into stable operation, higher power and longer life of the drive unit.
Original air filter 50310272AR is designed specifically for Oleo-Mac GSH series chainsaws. Perfectly fits dedicated models, guaranteeing a leak-proof system and a secure fit without the need for modifications. The use of a filter with adequate permeability and working surface minimizes the risk of contaminants entering the cylinder, piston and carburetor, so the saw retains its factory performance even during prolonged operation in harsh forest or garden conditions.
Oleo-Mac GSH510-560 air filter 50310272AR - installation location and compatibility
Air filter 50310272AR is installed in the air filter compartment, directly above the carburetor of the petrol chainsaw. After removing the filter cover, the element is inserted into a specially shaped slot, and then secured according to the design of a particular model. By maintaining factory dimensions - lengths of approx. 105 mm, 83 mm wide and with a bore diameter of approx. 20 mm - the filter works perfectly with the suction system, ensuring even air flow.
This filter model is designed for Oleo-Mac petrol chainsaws:
- GSH 51
- GSH 510
- GSH 56
- GSH 560
By using the original part number 50310272AR, you can be sure that you are buying the correct replacement part according to the manufacturer's recommendations. Properly fitting the filter makes it easier to service the equipment, and reduces the risk of leaks that could occur when using replacements of inadequate dimensions.
Professional air filter for Oleo-Mac petrol chainsaws - application and benefits in daily work
GSH510-560 50310272AR chainsaw air filter is designed for intensive work in an environment full of dust, sawdust, sand and other debris. It works well in both typical household applications and professional forestry, municipal or construction work. Thanks to its design, the filter effectively protects the motor from premature wear and allows it to maintain a constant power level even during prolonged cutting.
Example applications:
- Preparation of firewood and firewood on private property, where the chainsaw works in a cloud of sawdust;
- Tree and shrub pruning work in orchards, gardens and green spaces, exposed to dust, dust and plant debris;
- Intensive use of the chainsaw in forestry services, logging and limbing, where air filtration is critical to engine life;
- cutting of boards, logs and other wooden materials at the construction site, carpentry workshop or service point.
Quality, durability and reliability - why choose the original 50310272AR air filter?
Original Oleo-Mac air filter 50310272AR is made of high-quality filter material with uniform structure. It provides an optimal balance between dirt trapping efficiency and adequate air permeability. This ensures that the engine gets the right amount of air for fuel combustion, resulting in easy starting, even rpm and less mixture consumption.
Durable filter design is resistant to vibration and variable operating conditions, typical of petrol chainsaws. Suitably rigid frame prevents deformation, and precise fit minimizes the risk of bypassing air outside the filter medium. Regular replacement of the filter with the original model 50310272AR reduces service costs, reduces wear on the cylinder and piston rings, and prevents contamination of the carburetor.
Oleo-Mac GSH510-560 air filter - easy installation, fast maintenance and cost-effective operation
The 50310272AR air filter design facilitates quick installation and removal without the use of specialized tools. In practice, the user can remove the filter cover in a few moments, clean the inside of the chamber and replace the element with a new one. Simple operation encourages regular maintenance, which has a huge impact on the life of the saw and operational safety.
Systematic checking and replacement of the filter works especially well:
- During seasonal preparation of large amounts of firewood, when the saw is in operation almost every day;
- In logging and tree care service companies, where equipment reliability is crucial for timely completion of orders;
- On construction sites and in workshops where the saw is one of the basic tools and downtime generates real costs.
The investment in the original 50310272AR air filter is small compared to the potential cost of overhauling the engine after contaminants enter the combustion chamber. This is one of the simplest and cheapest forms of protecting a chainsaw from failure.
The most important technical data of the air filter GSH510-560 50310272AR
- Product type: air filter for petrol chainsaw
- Purpose: Oleo-Mac GSH 51, GSH 510, GSH 56, GSH 560 chainsaws
- Length: approx. 105 mm
- Width: approx. 83 mm
- Filter opening diameter: approx. 20 mm
- Part number (manufacturer code): 50310272AR
- Condition: new, original item
- Application: petrol chainsaws, forestry, garden, construction and household work
How to care for the air filter in your Oleo-Mac chainsaw to extend its life?
In order for the air filter to serve its purpose for as long as possible, it is a good idea to regularly check its condition. After each intensive work in high dust, it is recommended to visually inspect the filter surface and clean the filter chamber from the lingering sawdust. At the time of noticeable dirt, mechanical damage or a pronounced decrease in the power of the saw, the filter should be replaced with a new item number 50310272AR.
Proper operation of the air filter includes:
- Regular maintenance, especially before the busy season;
- Avoiding the use of aggressive chemicals that could damage the structure of the filter medium;
- replacing the filter with the original model after the manufacturer's specified period of use, or more often if the saw works in very difficult conditions.
FAQ - Frequently asked questions about GSH510-560 50310272AR chainsaw air filter
Question 1: Does filter 50310272AR fit my Oleo-Mac GSH 510 chainsaw?
Yes, the air filter with part number 50310272AR is designed m.in. for Oleo-Mac GSH 510 chainsaw. This is an original part, perfectly matched to this model.
Question 2: How often should I change the air filter on my chainsaw?
Frequency of replacement depends on the intensity and conditions of operation. For occasional home use, replacing once a season is usually sufficient. When working professionally or in very dusty environments, it is a good idea to inspect the filter after each major job and replace it when it is visibly dirty or damaged.
Question 3: Can I clean the filter with compressed air instead of replacing it with a new one?
Gently blowing the filter with compressed air from the clean side can temporarily improve airflow, but it is no substitute for a full replacement. Over time, the structure of the filter material wears out, so for full protection of the engine, it is recommended to periodically replace it with a new, original 50310272AR filter.
Question 4: How to recognize that the air filter is worn out?
Symptoms of filter wear may include: pronounced soiling of the filter surface, visible mechanical damage, decrease in the power of the chainsaw, difficulty starting or uneven engine operation. In such situations, it is best to replace the filter with a new one right away.
Question 5: Why use an original filter instead of a cheaper substitute?
Original air filter 50310272AR was designed specifically for Oleo-Mac GSH series chainsaws and passed quality and durability tests. It guarantees the right degree of filtration, perfect dimensional fit and full compatibility with the intake system. Replacements with uncertain parameters may not provide adequate engine protection, leading to higher repair costs in the long run.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.