AIR FILTER FOR SAW GST250 50290056R
- Original air filter for Oleo-Mac GST250 chainsaw 50290056R. Effectively traps dust and sawdust, protecting the engine from wear and tear. Guarantees full power, easy starting and stable saw operation. Ideal for intensive wood cutting.
Air filter for the GST250 chainsaw - a key element for reliable operation of your chainsaw
Air filter for GST250 50290056R is an original filter cartridge designed for Oleo-Mac GST 250 / GST250 petrol chainsaw. Its task is to effectively clean the air sucked into the cylinder from dust, sawdust and other impurities generated during wood cutting. This protects the engine from premature wear and tear, and the saw retains full power, fires easily and runs stably in all conditions. The filter is installed in the factory slot under the air filter cover of the GST250 chainsaw. The design, which fits snugly into the housing, ensures a tight fit and secure attachment, minimizing the risk of unfiltered air entering the carburetor and combustion chamber. This is a consumable part, the regular replacement of which is essential to maintain the high performance and safety of the chainsaw.Original air filter Oleo-Mac GST250 50290056R - quality that protects the engine
The original air filter for the Oleo-Mac GST250 chainsaw, part number 50290056R, is designed specifically for the demanding conditions in which chainsaws are used. The precise fit of the GST250 ensures perfect seating in the housing, which is key to maintaining the tightness of the intake system. The three-layer structure of the filter material (rigid skeleton + fine mesh + filter layer) ensures high efficiency in trapping fine dust particles, while allowing free airflow. In practice, this means: - stable engine operation even under heavy load, - lower fuel consumption thanks to an optimal fuel-air mixture, - protection of the cylinder, piston and rings from scratches caused by the ingress of contaminants. In everyday use - when cutting firewood, forming tree crowns or tending orchards - the air filter has a direct impact on the life of the chainsaw. Regular inspection and replacement of this component is an easy way to avoid costly engine overhauls.
Where does the air filter for the GST250 50290056R chainsaw mount??
Air filter 50290056R mounts on top of the saw, directly above the carburetor, under the service cover. Access to it is very easy - just unscrew or unlock the filter cover, remove the used cartridge and insert a new element in its place. This design makes regular maintenance of the saw easier for both professional users and those who use the equipment occasionally. With easy access, you can: - quickly clean the filter after a busy day in the woods, - replace it before the firewood cutting season, - check the condition of the filter after working in an extremely dusty environment (e.g., in a sawmill, when cutting dry, decayed wood). Proper installation of the air filter is key to maintaining a leak-free system. The original item 50290056R has dedicated hooks and a shape that prevents its accidental misplacement. This is an added safety for the user and a guarantee that the air going to the engine is properly purified.
Using the GST250 air filter - reliable work in the forest, orchard and on the farm
Air filter for GST250 50290056R is designed for Oleo-Mac GST 250 / GST250 petrol chainsaw - a lightweight, handy chainsaw designed for: - maintenance work on the property and in the garden, - cutting firewood around the house, - trimming branches and boughs in orchards, - light forestry and cleaning work. Thanks to its high filtration efficiency, the saw retains full power even during intensive cutting, when there is a lot of dust and fine wood particles in the air. The filter plays an important role especially when: - cutting dry wood, which generates very fine dust, - working on windy days, when sawdust and dust are "forced" into the area of the air intake, - prolonged use of the saw without interruption. The use of an original air filter is recommended wherever not only performance but also equipment durability matters. It is an ideal choice for both individual users and forestry companies, utilities or gardening crews.
Air filter for Oleo-Mac GST250 chainsaw 50290056R - user benefits
Choosing the original 50290056R air filter for the GST250 chainsaw brings a number of practical benefits: 1. **Longer engine life** Effective retention of dust particles, dust and sawdust protects the cylinder and piston from scratches. The risk of loss of compression is reduced, and the engine retains its performance for a long time. 2. **Faster running culture of the chainsaw** Clean air is a stable fuel-air mixture. The saw fires up more easily, revs evenly and does not "choke" when pressed hard against the wood. In practice, this means less operator fatigue and faster task completion. 3. **Saves time and money** Changing the air filter regularly is much cheaper than repairing a worn-out engine. In addition, a clean filter helps maintain proper combustion, which promotes lower fuel consumption - especially important for intensive daily use. Examples of daily use: - preparing firewood for the winter - long-lasting cutting of blocks and logs without a drop in power, - cleanup work after windstorms - removing fallen or damaged branches, - care of ornamental trees around the house - light, precise cuts, during which the saw must respond quickly to the gas.
What is the air filter for the GST250 50290056R chainsaw - construction and operation
Air filter 50290056R is a replacement cartridge that cleans the air sucked into the engine of a chainsaw. It consists of: - a rigid frame that provides a stable attachment, - a fine but durable mesh or filter membrane, - precisely fitted sealing edges. The air drawn in by the carburetor passes through a filter surface on which fine impurities are retained. The purified air goes further into the combustion chamber, where it mixes with the fuel. As a result: - reduces the amount of carbon build-up in the combustion chamber, - the spark plug stays cleaner for a longer period of time, - the engine maintains its nominal power. The air filter is a consumable item - this means that it gets naturally dirty over time and should be replaced with a new one. For saws used intensively, it is recommended to check the filter even after each day of operation, and in conditions of light use - every few uses.
Technical parameters of the air filter for the GST250 50290056R chainsaw
- Purpose: Oleo-Mac GST 250 / GST250 petrol chainsaw
- Part type: air filter (filter cartridge)
- Part number / manufacturer code: 50290056R
- Type of device: petrol chainsaw
- Condition: new, original item
- Color: light, translucent
- Design: rigid frame with built-in filter surface
How to care for the GST250 air filter - practical usage tips
To get the most out of your Oleo-Mac GST250 chainsaw, it's a good idea to make sure the air filter is serviced regularly:
- Regular inspection - check the condition of the filter before work or at the end of the working day. If it is heavily soiled, clean it gently according to the manufacturer's recommendations or replace it with a new one.
- Avoiding washing that does not comply with the instructions - not all filters can be washed with water or aggressive chemicals. Improper cleaning can damage the filter structure and reduce the effectiveness of the operation.
- Timely replacement - when working intensively in the forest or sawmill, it is a good idea to have at least one new filter in stock. This allows you to quickly restore full performance of the device when the existing filter becomes excessively dirty.
FAQ - frequently asked questions about the air filter for the GST250 50290056R chainsaw
Question 1: Does the air filter 50290056R fit all versions of the GST250 chainsaw?
Yes, the air filter with part number 50290056R is designed for Oleo-Mac GST 250 / GST250 petrol chainsaw and fits standard versions of this model. Before you buy, it's a good idea to compare the part number with the old filter or the device's documentation.
Question 2: How often should I change the air filter on my GST250 chainsaw?
Frequency of replacement depends on the intensity and conditions of operation. For occasional home use, the filter can be inspected every few uses and replaced at least once a season. When working professionally in the forest or sawmill on a daily basis, it is advisable to check more often - even after each day's work - and replace the filter when it is visibly dirty or damaged.
Question 3: Can a clogged air filter damage a chainsaw?
Yes. A clogged filter restricts the air supply, resulting in a fuel-air mixture that is too rich. This manifests itself as a drop in power, smoke and unstable engine operation. Prolonged operation in such conditions can lead to overheating, excessive carbon build-up and shortened engine life.
Question 4: Can replacements be used instead of the original filter 50290056R?
Various replacements are available on the market, but the original 50290056R air filter guarantees full compatibility with the GST250 chainsaw, proper airflow parameters and high filtration efficiency. Using an unsuitable replacement may result in inferior engine protection or installation problems.
Question 5: How to recognize that the air filter is already suitable only for replacement?
If the filter is visibly dirty, grayed, has a damaged filter mesh, cracks or deformation of the frame, it should be replaced immediately. Symptoms such as a decrease in the power of the chainsaw, difficulty firing or "throttling" of the engine can also indicate that the filter is clogged.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.