AIR FILTER FOR CHAINSAW GST360 50270143AR
- AIR FILTER FOR GST360 saw 50270143AR - dedicated cartridge for GST360 saw. Effectively traps dust, dirt and sawdust, protecting the engine from seizure. Provides stable operation, easy starting and optimal power even in dusty conditions. Ideal for
AIR FILTER for GST360 chainsaw 50270143AR - reliable engine protection for your chainsaw
Air filter for GST360 chainsaw
The air filter for the GST360 50270143AR chainsaw is a precision-matched consumable component designed to effectively filter the air sucked into the combustion engine of the chainsaw. It ensures that only clean, contaminant-free air enters the combustion chamber, which translates into stable operation of the device, lower fuel consumption and a significant extension of the life of the drive unit. This is a part whose regular replacement is the basis for proper maintenance of any GST360 chainsaw.
AIR FILTER FOR GST360 saw 50270143AR is made of high-quality filter material embedded in a durable frame. Its construction is designed to trap dust particles, sawdust, wood dust and other contaminants that occur during intensive work in the forest, garden or construction sites. Carefully selected airflow parameters guarantee optimal engine performance and easy starting in all conditions.
The filter is mounted in the air filter compartment of the GST360 chainsaw - just above the carburetor, under the dedicated engine guard cover. Replacement is quick and intuitive: just remove the cover, take out the old filter, clean the chamber of dirt and place the new cartridge in the guides. A properly installed filter tightly adheres to the adhesion surface, preventing unfiltered air from entering the engine.
The use of the 50270143AR filter covers all the jobs you use the GST360 chainsaw for - from cutting firewood, to trimming branches and boughs in the garden, to professional logging applications in the forest or carpentry work on a construction site. An efficient, clean air filter is crucial, especially when working in dusty environments where the amount of airborne particles is extremely high.
AIR FILTER for GST360 saw 50270143AR - maximum engine protection and extended machine life
The most important task of the air filter is to effectively protect the internal combustion engine from contaminants. The 50270143AR was designed specifically for the GST360 saw, ensuring a perfect fit and high filtration efficiency. The precise structure of the filter material traps even fine wood dust without restricting the airflow required for proper combustion process.
By regularly replacing the filter with a new one, such as 50270143AR, you minimize the risk of dirt entering the cylinder, piston and carburetor. You will reduce wear and tear on moving parts, reduce the risk of engine seizure and avoid costly repairs. In practice, this means longer, trouble-free operation of the GST360 saw - both in amateur and professional applications.
Examples of daily applications:
- Cutting firewood on the property - the filter protects the motor from sawdust and dust generated during cutting.
- Cleanup work after a windstorm - when removing fallen trees and broken branches, the filter reduces the entry of dirt and dust into the drive unit.
- Professional forestry work - intensive use in the forest, where floating dust and bark fines are particularly dangerous to the engine.
A well-chosen air filter, such as the 50270143AR, has a direct impact on the life of the chainsaw. Clean air means cleaner burning of the fuel mixture, less carbon buildup and contaminants in the combustion chamber, resulting in fewer breakdowns and longer service intervals.
Precise fit and easy installation of air filter GST360 50270143AR
The GST360 50270143AR air filter is designed to be as easy to install as possible. Its shape and dimensions are perfectly matched to the filter chamber of the GST360 saw, eliminating the risk of leaks and ensuring proper adhesion to contact surfaces. The mounting hole and guides make filter replacement quick and require no specialized tools.
Installation is done in a few simple steps:
- Disconnect the GST360 saw from the ignition source (turn off the engine, remove the spark plug if necessary).
- Open the air filter compartment cover, usually fixed with a screw or latch.
- Remove the used filter, being careful not to shake the dirt on it into the carburetor.
- Remove any remaining dirt from the chamber, such as with a brush or compressed air.
- Place the new air filter 50270143AR in the guides, adjusting the mounting hole according to the design of the saw.
- Close the filter compartment lid and make sure it is locked properly.
Such a simple procedure makes it possible for the user to take care of the condition of his chainsaw by himself without visiting the service center. Changing the filter regularly - e.g. every season, more often with intensive use - guarantees stable revolutions, easy starting and less consumption of the fuel mixture.
Examples of practical applications:
- Changing the filter before the heating season - when you prepare large amounts of firewood, a new filter will ensure trouble-free operation throughout the season.
- Checking after working in extremely dusty conditions - after cutting dry, decayed wood, it's a good idea to change the filter to avoid clogging and a decrease in the power of the saw.
- Maintenance before a prolonged break in use - a fresh filter and cleaned chamber is a sure start after winter or a prolonged standstill.
High quality materials and reliability of air filter 50270143AR in daily use
Air filter 50270143AR for GST360 chainsaw is made of durable, damage-resistant filter material, embedded in a sturdy frame. This design guarantees resistance to tearing, crushing and deformation that could affect the tightness and efficiency of the filter. The dense, uniform structure of the filter surface provides an optimal compromise between high filtration and free airflow.
The reliability of the filter is especially important during prolonged high-speed operation, when the engine intensively sucks in air. Stable properties of the filter material reduce power drops and keep the saw running evenly. As a result, the operator can count on the predictable behavior of the machine even in demanding conditions - when cutting hard wood, working in humid environments or in low temperatures.
Benefits of the 50270143AR filter:
- Better engine protection - less risk of seizure, overheating and premature wear of internal components.
- Stable power of the chainsaw - no sudden drops in speed and "choking" of the engine due to a clogged filter.
- Fuel economy - clean air facilitates proper combustion of the mixture, resulting in lower fuel consumption.
Examples of daily use:
- Regular work on the farm - cutting beams, pallets and wooden structures, where dust and dirt are in the air.
- Pruning trees in an orchard - protecting the engine from dust from bark, leaves and dry soil floating during work.
- Carpentry work - construction of gazebos, sheds, roofing, where the GST360 saw works for long hours, and a reliable filter ensures that the device is fully ready.
Parameters and technical application of the air filter for GST360 50270143AR chainsaw
Air filter 50270143AR has been developed as a dedicated consumable for the GST360 chainsaw. Its design corresponds to the technical requirements of modern two-stroke engines, in which the right amount and purity of air is crucial for performance and exhaust emissions. Carefully selected filter surface allows the correct air/fuel ratio to be maintained at different engine loads.
Examples of technical features (general nature, typical of this type of filter):
- Dedicated to the model: saw GST360
- Product code / designation: 50270143AR
- Item type: air filter - reusable cartridge for periodic replacement
- Material: fine structure filter material + rigid reinforcing frame
- Purpose: filtration of air drawn into the carburetor and combustion chamber
The use of air filter 50270143AR is recommended not only when the old element is visibly dirty, but also as a preventive measure - after a certain period of use. The use of original or full-value replacements matched exactly to the model GST360 allows you to maintain the performance of the saw at the level provided by the manufacturer.
Daily use cases:
- Periodic service of the chainsaw in the workshop - changing the filter as a fixed point of technical inspection.
- Preparing the device for the summer season - replacing worn out consumable parts before intensive operation.
- Regeneration of a used chainsaw - replacement of the filter along with a spark plug and fresh fuel mixture to restore full efficiency of the equipment.
FAQ - Frequently asked questions about the air filter for the GST360 50270143AR chainsaw
Question 1: How often should you change the air filter on your GST360 chainsaw??
Answer: The frequency of replacement depends on the intensity of use and operating conditions. For occasional use, it is recommended to replace at least once a season. When working professionally or in very dusty environments, it is a good idea to inspect the filter after each long day of work and replace it when it is visibly dirty or clogged.
Question 2: Can I clean the air filter instead of replacing it?
Answer: Short-term blowing or gentle cleaning may help, but the air filter is a consumable item designed to be replaced periodically. Over time, the filter material loses its properties and no longer provides adequate capacity or level of filtration. For the safety of the engine, it is recommended to regularly replace with a new cartridge 50270143AR.
Question 3: Does the filter 50270143AR fit other models of chainsaws?
Answer: The filter was designed with the GST360 saw in mind and its shape, dimensions and mounting method are tailored just for this model. Using it on other saws may result in leaks or malfunctions, so always check compatibility with a specific model.
Question 4: What are the symptoms of a worn or clogged air filter?
Answer: Typical symptoms include: a decrease in the power of the chainsaw, difficulty getting up to speed, the engine "choking" under load, increased fuel consumption, and sometimes a problem starting the machine. If you notice such symptoms, first check the condition of the air filter and replace it with a new one if necessary.
Question 5: Does changing the air filter affect fuel consumption?
Answer: Yes. A clean, unobstructed air filter ensures proper air supply to the engine for efficient combustion of the fuel mixture. A clogged filter causes a shortage of air, resulting in poorer combustion and higher fuel consumption. Replacing the 50270143AR filter with a new one can help reduce the operating costs of the GST360 saw.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.