AIR FILTER PRE-FILTER FOR SAW GS350 50240150AR
- GS350 chainsaw air pre-filter 50240150AR effectively traps dust and sawdust, protecting the engine from wear and tear. Provides stable power, easy firing and lower fuel consumption, extending the life of the chainsaw. Ideal for amateur and professional wo
AIR FILTER PRE-FILTER FOR SAW GS350 50240150AR is a high quality consumable component designed for GS350 series petrol chainsaws. Its task is to pre-clean the air sucked into the engine from dust, sawdust and other contaminants generated during intensive woodworking operations. Thanks to the use of appropriately selected filter material, this filter effectively traps impurities, while not restricting air flow, resulting in stable power, easy firing and lower fuel consumption.
GS350 chainsaw pre-air filter
This is an original, dedicated pre-filter designed for GS350 chainsaws. Its shape and dimensions are perfectly matched to the filter chamber of these devices, ensuring a tight intake system and maximum filtration efficiency. Made of durable filter material with the right density, guarantees long life and reliable operation even in very dusty environments.
What is the air filter of the GS350 50240150AR chainsaw pre-filter?
Air pre-filter is the first protective barrier for the engine of a petrol chainsaw. Model 50240150AR was designed specifically for GS350 saws and serves as a "disc" function for the main air filter:
- Air pre-cleaning - traps larger dirt particles (sawdust, shavings, dust) before they enter the main filter.
- Main filter relief - reduces its clogging, which extends the intervals between cleaning and replacement of the full filter cartridge.
- Better engine performance - constant flow of clean air promotes efficient combustion of the fuel-air mixture, which translates into power, dynamics and operating culture.
For the user, this means lower operating costs, less frequent service downtime and higher equipment reliability in both amateur and professional use.
Application and place of installation of GS350 50240150AR pre-air filter
AIR FILTER PRE-FILTER FOR SAW GS350 50240150AR mounts in the air filter housing of the chainsaw, just before the actual main filter. It is located in the upper part of the device - after removing the filter cover, it is visible as the first rectangular filter insert.
Examples of applications in daily work:
- Cutting firewood in the backyard - The filter effectively traps dust from dried out logs, which protects the engine even when working for hours preparing fuel for the season.
- Home and garden work - When pruning branches, removing branches after a windstorm or felling single trees, the filter protects the intake system from bark, leaf and soil dust.
- Professional use in the forest - During intensive work in the field sawmill or logging, where the concentration of dust and sawdust is very high, the pre-filter significantly reduces the risk of contaminants entering the cylinder and piston.
Proper installation is very simple - just place the filter in the guides or socket provided by the manufacturer of the saw, so that it fits snugly on the contact surface. Proper alignment ensures no leaks and full filtration efficiency.
Benefits of regularly changing the GS350's pre-air filter
Although the pre-filter is a small and relatively inexpensive component, it has a huge impact on the life and efficiency of the saw. Regular inspection and replacement with a new 50240150AR cartridge provides a number of benefits:
- Protection against costly failures - dirty air causes rapid wear on the cylinder, piston, rings and carburetor. A clean filter reduces the risk of engine seizure or loss of compression.
- Consistent, high-powered saw - The fresh filter does not restrict the airflow, so the saw maintains speed and does not "choke" when cutting thick logs.
- Lower fuel consumption - the correct composition of the fuel-air mixture makes the saw burn the optimal amount of fuel, which is important for frequent use.
For the chainsaw owner, this translates into real savings - it is cheaper and faster to change the filter regularly than to overhaul the drive unit or buy a new machine.
Quality, durability and reliability of the GS350 50240150AR chainsaw pre-air filter
Pre-filter 50240150AR is made of selected filter material with a precisely selected density. This design provides a compromise between effective dirt trapping and free airflow. With this filter:
- Retains shape and filtration properties for a long time - does not crumble, does not delaminate, does not deform even with frequent cleaning and working in a humid environment.
- It is resistant to vibrations and shocks - the saw generates significant vibrations during operation, so the stability of the material and its mechanical resistance are key to maintaining the tightness of the filtration.
- Ensures reproducible filtration parameters - each unit has been manufactured according to the requirements of the saw manufacturer, eliminating the risk of dimensional differences and installation problems.
In practice, this means that the user can rely on the filter for both short, occasional work in the garden and for many hours of construction or forestry jobs. The GS350 chainsaw's stable performance translates into operator safety, cutting accuracy and speed in completing tasks.
How to care for the GS350 50240150AR air pre-filter - practical usage tips
To maximize the potential of your pre-filter and extend the life of your chainsaw, it's a good idea to follow a few simple operating rules:
- Regular inspections - check the condition of the filter after each intensive day's work or after several shorter cutting sessions. If the filter is visibly dirty, clean it or replace it with a new one.
- Gentle cleaning - from the surface of the filter can be gently removed with a soft brush or a stream of compressed air (from the inside out). When the filter is heavily worn, discolored or damaged - replace it.
- Protection against moisture and chemicals - it is not recommended to wash the pre-filter in gasoline, solvents or aggressive detergents. This can damage the structure of the filter material and reduce its effectiveness.
By following the above recommendations, the user keeps the pre-filter in optimal condition, which directly affects the comfort and safety of the GS350 chainsaw in all conditions.
Why choose the GS350 50240150AR chainsaw air pre-filter?
Choosing the right air filter is an investment in the longevity of the entire unit. Model 50240150AR is a product tailored to the specifics of GS350 chainsaws, making it stand out from universal replacements:
- Perfect fit - no need for cutting or fitting, the filter immediately fits into the mounting location provided by the saw manufacturer.
- Stable operating parameters - thanks to proper filtration, the saw does not lose power even during prolonged cutting of thick logs or intensive processing of construction timber.
- User safety and peace of mind - using a dedicated filter, you minimize the risk of malfunctions resulting from the entry of contaminants into the combustion chamber, ensuring smooth operation without unforeseen interruptions.
This filter will work well for private users who prepare firewood several times a year, as well as for professionals doing construction, roofing or forestry work. In either scenario, it provides clean air, even engine operation and the assurance that your GS350 chainsaw will last for years to come.
FAQ - Frequently asked questions about the GS350 50240150AR chainsaw air pre-filter
Question 1: How often should you change the air pre-filter on GS350 chainsaws?
Frequency of replacement depends on the intensity of use and operating conditions. For typical home use, it's at least worth checking the filter after each major day's work and replacing it every few such cycles. In professional operation in heavily dusty environments, replacement may be necessary even more frequently - whenever the filter is visibly dirty or has lost its properties.
Question 2: Can the pre-filter be cleaned or does it need to be replaced right away?
The pre-filter can be gently cleaned of top dirt, such as with a brush or compressed air. However, if the material is heavily soiled, mechanically damaged, burnt or distorted, it is recommended to replace it with a new 50240150AR cartridge to ensure full filtration efficiency.
Question 3: Does the installation of filter 50240150AR require specialized tools?
No, the installation of the pre-filter is very simple and does not require specialized tools. Simply remove the air filter cover on the saw, remove the used cartridge, clean the inside of the housing of dust and insert the new filter in the designated place. The whole operation takes a few minutes and can be done by yourself.
Question 4: How to recognize that the pre-filter should be replaced?
Replacement is indicated by such symptoms as a visible, thick layer of dirt on the surface of the filter, discoloration, mechanical damage, fraying of the material or a perceptible decrease in the power of the chainsaw and problems with entering the revolutions. In this case, replacement with a new filter 50240150AR is the simplest and safest solution.
Question 5: Does the use of non-original filters affect the operation of the GS350 chainsaw?
Using haphazard, mismatched filters can result in intake system leaks, inferior filtration, and airflow disturbances. This can lead to a loss of power, unstable operation and even accelerated engine wear. The use of the dedicated pre-filter 50240150AR is the assurance that the GS350 chainsaw works in the conditions prescribed by the manufacturer.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.