16" CHAINSAW GUIDE - 41 CM .3/8"X.050" 1,3 MM 50052012R
- Professional chainsaw guide 16" (41 cm) 3/8 "P x .050" 1.3 mm 50052012R. Durable steel, 57 links, ideal for firewood cutting, carpentry work and tree and shrub care.
Saw blade guide 16" 41 CM 3/8 "x.050" 1.3 mm 50052012R - professional chainsaw bar for demanding users
Guide bar for chainsaws 16" - 41 cm 3/8 "x.050" 1.3 mm 50052012R is a high-quality work piece for chainsaws, designed for intensive daily use. The right length of 41 cm (16") and the 3/8 "P pitch make the guide ideal for both household work and semi-professional and professional applications - from cutting firewood, to carpentry work, to caring for trees and shrubs.
The guide bar is a key component of the saw's cutting system. Responsible for stable chain guidance, precision cutting, safety and durability of all equipment. The 50052012R is made of durable steel, resistant to deformation, overheating and abrasive wear, which significantly extends the life of the saw and minimizes the frequency of replacement of consumable parts.
Installation of the guide bar is carried out directly in the body of the saw - between the chain tensioner and the sprocket. The mounting holes and guide groove are designed to ensure fast, secure installation and stable operation with a properly selected cutting chain with a guide link thickness of 1.3 mm and a pitch of 3/8 "P.
Thanks to its optimal balance, the guide guarantees comfortable working conditions, less operator fatigue and precise, even cutting. It is the ideal choice for users who want a combination of high durability, safety and accuracy in their chainsaw operation.
Saw blade guide 16" 41 CM 3/8 "x.050" 1.3 mm 50052012R - construction, installation and fitting to the saw machine
The guide 50052012R is made of high-quality steel, which provides adequate rigidity and resistance to the stresses that occur during intensive cutting. The use of a precisely shaped groove ensures stable chain link guidance and minimizes the risk of chain dropping, even when working under heavier pressure or in more difficult material.
Installation of the bar is done in the standard way - the bar is seated in the slot of the saw, thread the cutting chain onto the drive sprocket and the groove of the bar, and then tighten and tighten the side cover of the saw. The design of the guide bar is compatible with popular chainsaw models that use a 3/8 "P cutting system and a guide link thickness of 1.3 mm and the corresponding number of links.
Typical examples of the use of this model of guide are:
- installation in chainsaws used for cutting firewood on the plot or in a home workshop,
- use in saws working on construction sites - for cutting beams, squared timbers, boards,
- maintenance work in orchards and gardens - removing smaller branches, pruning trees, restoring clearance on the plot.
Excellent chain handling and safe operation - key advantages of the 16" 41 cm 3/8 "P 1.3 mm guide bar
Carefully selected bar geometry and the correct nose profile contribute to smooth chain handling and reduced vibration, resulting in greater user comfort and safety. The stable run of the chain makes it possible to make accurate longitudinal and transverse cuts, as well as perform more precise work, such as in carpentry or when cutting structural components.
Properly shaped oil channel holes and grooves promote effective lubrication of the chain and bar. This reduces friction, reduces heat build-up and wear and tear, while lowering the risk of chain jamming in hard or resinous woods. A well-lubricated cutting system also means greater safety - less chance of chain breakage and smoother saw operation.
In everyday use, this means:
- confident, predictable cutting of even harder woods,
- no need for frequent correction of the cutting path - the saw does not "run away" to the sides,
- less fatigue for the operator during prolonged work, such as cleaning up a plot of land after a windstorm or preparing more fuel for the winter.
Durability and return on investment - guide 50052012R in intensive use
Guide bar for chainsaws 16" - 41 cm 3/8 "x.050" 1.3 mm 50052012R has been developed for long-term operation in diverse conditions. High-quality steel and precision machining improve resistance to guide groove abrasion, mechanical deformation and corrosion. With proper operation and regular lubrication, the guide bar can work in the saw for a long time without losing its performance.
The 41 cm (16") length is a compromise between maneuverability and the ability to cut thicker material. As a result, a single saw with this guide will work well for a wide range of tasks - from quickly cutting a board to chopping medium-thick logs. For the user, this means savings - there is no need to have several different guides for simple, everyday work.
The practical application of this guide is m.in.:
- regular cutting of firewood - season after season, without the need for frequent replacement of the element,
- use in green care companies - where the saw is used daily to cut branches and boughs,
- use by construction and carpentry teams in the erection of wooden structures, canopies, shelters and terraces.
Use of the guide for saws 16" - 41 cm in home, garden and professional work
The universal size and parameters of the 50052012R guide make it the perfect solution for a wide range of users - from homeowners to farmers and fruit growers to service companies. Its design allows it to perform both light and more demanding work efficiently.
Examples of applications in daily practice:
- House and plot: preparing firewood, cleaning up branches after tree trimming, shortening beams and boards for minor repairs and finishing work.
- Agriculture and horticulture: removal of dry and damaged branches in orchards, pruning of trees and shrubs, cleaning up wooded baulks.
- Forestry and gardening services: intervention work after windstorms, preparation of wood material for export, crown shaping and removal of hazards along traffic routes.
Thanks to its sturdy construction and properly selected technical parameters, the guide for saws 16" - 41 cm 3/8 "x.050" 1.3 mm 50052012R guarantees high efficiency and safety in any of the above scenarios.
Technical specifications of the guide bar for saws 16" - 41 cm 3/8 "x.050" 1.3 mm 50052012R
Chain saw guide bar:
- Guide length: 41 cm - 16"
- Chain pitch: 3/8 "P (3/8" x .050")
- Guide link (groove) width: 1.3 mm
- Number of links of the mating chain: 57
- Purpose: petrol and electric chainsaws compatible with the above parameters
- Product/System Code: 50052012R
- EAN code: 8026619083991
When selecting a chain for this bar, you should pay attention to three basic parameters: pitch (3/8 "P), guide link thickness (1.3 mm) and number of links (57). Only the correspondence of these values will guarantee the correct interaction of the guide bar with the chain and the safe, efficient operation of the entire chainsaw.
FAQ - Frequently asked questions about the 16" - 41 cm 3/8 "x chainsaw guide.050" 1.3 mm 50052012R
Question 1: Will this guide fit my chainsaw?
Yes, as long as your saw is suitable for a 16" (41 cm) long bar and works with a chain with 3/8 "P pitch, 1.3 mm guide link thickness and a total of 57 links. Before you buy, it's a good idea to check these parameters in the saw's manual or on the nameplate.
Question 2: For what work is the 16" - 41 cm guide best suited??
It's a versatile size suitable for most work around the house, in the garden or on the farm: cutting firewood, pruning trees and shrubs, carpentry work, cleaning up after storms. Works well for both private users and service companies.
Question 3: How to take care of the slide to serve as long as possible?
The most important thing is to lubricate the chain and bar regularly, use proper chain tension, rotate the bar periodically (up/down), clean the groove and oil holes, and avoid working with a dull chain. Such measures significantly extend the life of the guide.
Question 4: Can I use a different chain than the one recommended for this bar?
It is not recommended. For safety and proper operation, use a chain with the following parameters: pitch 3/8 "P, guide link width 1.3 mm, 57 links. Using a different chain can lead to accelerated wear, tension problems and even endanger the user.
Question 5: Is the guide bar 50052012R suitable for electric saws?
Yes, the bar can work with both petrol and electric chainsaws, as long as they meet the required installation and technical parameters (length 16", pitch 3/8 "P, link thickness 1.3 mm, 57 chain links).
Question 6: How to recognize the moment when the guide should be replaced with a new one?
The need for replacement is evidenced by m.in.: visible deep wear of the guide groove, uneven wear of the sides of the guide bar, frequent dropping or wedging of the chain, excessive heating of the guide bar tip. In such situations, for the safety of your work, it is worth investing in a new guide.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.