CHAINSAW AIR FILTER 936/940 50050036AR
- Saw air filter 936/940 50050036AR for Oleo-Mac 936 and 940 effectively traps dust and sawdust, protecting the engine from wear and tear. Provides full power, easy starting, stable rpm and lower fuel burn. Ideal for intensive forestry work and pr
936/940 chainsaw air filter 50050036AR - reliable engine protection for your Oleo-Mac chainsaw
Oleo-Mac 936/940 chainsaw air filter - what is this part and why is it so important?
The 936/940 50050036AR chainsaw air filter is a precision-fitted component of the air intake system of Oleo-Mac 936 and 940 series petrol chainsaws. Its primary task is to effectively clean the air sucked into the combustion chamber of dust, sawdust and fine debris that is generated when cutting wood. This ensures that the engine receives adequately clean air, which translates into efficiency, even operation and longer life.
Using the right air filter is key to maintaining chainsaw power, easy starting and low fuel consumption. A dirty or worn filter restricts airflow, causing a drop in performance, difficulty firing, and faster wear on engine components. Replacing the filter with a new, dedicated 50050036AR model is a simple investment for trouble-free, safe and economical operation of the tool.
Where the air filter of the Oleo-Mac 936/940 50050036AR chainsaw is installed?
The 50050036AR air filter is mounted in the top of the petrol saw, in a special compartment under the service cover. This location provides quick access for the user, makes it easy to periodically check the condition of the filter and replace it without the use of complicated tools. Simply remove the top cover of the Oleo-Mac 936 or 940 chainsaw, slide the old filter off the mount, clean the chamber of fine debris, and install the new piece.
This location of the filter ensures that the flowing air is filtered just before it reaches the carburetor and combustion chamber. This keeps contaminants at a safe distance from the most sensitive parts of the engine. The simple installation also means that it doesn't take much time to change the filter on a regular basis - it can even be done in the field, during intensive forestry or household work.
In the daily operation of the chainsaw, the user can easily ensure that the filter is always in good condition - a quick removal, blowing out with compressed air or replacement with a new model 50050036AR are steps that significantly increase the reliability of the device and minimize the risk of costly repairs.
Use of air filter 936/940 50050036AR in petrol chainsaws
Air filter 50050036AR is designed for use in Oleo-Mac model 936 and 940 petrol chainsaws. It is perfect for both everyday household chores and more demanding tasks in the forest or orchard. Thanks to its design, it effectively protects the engine during:
- cutting firewood and firewood on the plot or farm,
- maintenance work in orchards and gardens, such as pruning and tree trimming,
- forestry work - felling, limbing and thinning, where there is a large amount of dust and sawdust in the air,
- construction of wooden structures, shelters, gazebos or fences, where the saw works intensively for a long time.
A properly selected and efficient air filter allows you to use the full power of your chainsaw while reducing the risk of engine overheating and excessive wear and tear. This is especially important for users who often work in harsh conditions - for example, in dusty, dry coniferous wood or in areas where there is a lot of dirt in the air.
Regular replacement of the air filter 936/940 50050036AR is also important from the point of view of the economy of operation - a clean filter means better combustion of the mixture, stable revolutions and lower fuel consumption, which, with longer use of the chainsaw, allows you to realistically reduce the cost of using the equipment.
Oleo-Mac 936/940 air filter 50050036AR - quality, durability and reliability
Air filter 50050036AR is made of high-quality filter materials and durable plastics resistant to mechanical damage and external factors. A precision filter mesh effectively traps dust particles without restricting airflow, which is crucial for maintaining proper saw power.
The filter structure is designed to provide:
- stable seating in the saw housing - The right shape and hooks guarantee a secure fit, with no play and no risk of unfiltered air getting in,
- easy to clean and replace - Regular maintenance does not require specialized tools or service experience,
- resistance to intensive use - The filter retains its properties even with frequent use of the chainsaw in difficult terrain conditions.
With the use of filter 936/940 50050036AR, the user can count on longer engine life, lower failure rate of the device and better comfort - the saw responds faster to the gas, does not choke and maintains a stable speed, which is of great importance during precise cuts.
User benefits - why choose air filter 936/940 50050036AR?
By choosing an air filter dedicated to Oleo-Mac 936 and 940 chainsaws, you are investing not only in a single component, but in trouble-free operation of the entire machine. The key benefits of the 50050036AR filter are:
- Protection of the engine from contamination - wood dust, sawdust or dust does not enter the combustion chamber, which reduces wear on the cylinder, piston and rings.
- Maintaining full saw power - free flow of clean air ensures optimum combustion of the fuel mixture and thus high cutting efficiency.
- Lower operating costs - a clean filter promotes proper fuel combustion, which reduces fuel consumption and the risk of failures requiring expensive service.
- Hassle-free startup - A well-chosen and clean filter makes it easier to fire up the chainsaw, especially in cold weather or after a prolonged standstill.
- Convenience and ease of use - filter replacement is quick and intuitive, so you can do it yourself at any time.
In practice, this means that during everyday work - cutting firewood, preparing construction material or caring for trees - your chainsaw will operate steadily, predictably and at full power. This translates into greater safety and shorter time to complete scheduled tasks.
Parameters and fitting of air filter for Oleo-Mac 936/940 chainsaws
The 50050036AR air filter was designed specifically for Oleo-Mac 936 and Oleo-Mac 940 chainsaws, ensuring full compatibility with the factory air intake housing and system. Suitable dimensions and shape allow for quick installation without the need for alterations or matching parts.
Key features of the fit:
- purpose: Oleo-Mac 936, Oleo-Mac 940 petrol chainsaws,
- part type: air filter, intake system component,
- product code / symbol: 50050036AR,
- installation: in place of the original air filter in the compartment under the top cover of the chainsaw.
The use of an exact-fit filter eliminates the problem of leaks that could occur when using random parts or substitutes of uncertain dimensions. This ensures that all intake air passes through the filter layer, and the engine receives an optimally prepared mixture of air and fuel.
Examples of daily use of air filter 50050036AR
Air filter 936/940 50050036AR works well wherever a petrol chainsaw operates in a dusty environment. Here are some practical examples:
- Home and garden work - When cutting branches, preparing firewood or cleaning up after windstorms, the filter protects the engine from fine sawdust and dust.
- Farms - When cutting down old trees in an orchard or removing volunteer trees on spurs, where equipment works long and hard.
- Forestry and professional work - During felling and thinning of wood in the forest, where floating particles are particularly troublesome for the intake system.
- Construction of wooden structures - When cutting structural elements, beams or boards frequently, when the saw is started many times during the day.
In any of these situations, a new air filter significantly reduces the risk of contaminants entering the engine. As a result, your tool maintains stable performance for a long time, and you can focus on getting the job done instead of worrying about breakdowns.
FAQ - Frequently asked questions about the 936/940 50050036AR chainsaw air filter
For which models of saws fits air filter 50050036AR?
Air filter 50050036AR is designed for Oleo-Mac 936 and Oleo-Mac 940 petrol chainsaws. Its use on other models is not recommended due to differences in the design of the housing and intake system.
How often should you replace the air filter in the Oleo-Mac 936/940 saw?
Frequency of replacement depends on the intensity of use and operating conditions. For occasional household chores, it is a good idea to check the condition of the filter every few hours of operation and replace it when it is heavily soiled or damaged. With intensive forestry work or in a very dusty environment, the check should be performed more often - even daily.
Can the 50050036AR filter be cleaned and reused?
The filter can be cleaned periodically, such as by blowing it with compressed air from a sufficient distance or by gently removing loose debris. However, it should be remembered that this is a temporary solution. When the filter material is clogged, damaged or excessively worn, it is essential to replace the filter with a new one to ensure effective engine protection.
How to recognize that the air filter needs replacing?
Symptoms of a worn or dirty filter are: a marked decrease in the power of the chainsaw, difficulty firing, unstable revs and visible, deep dirt on the surface of the filter. If the component still looks clogged or damaged after initial cleaning, replace it with a new model 50050036AR.
Does the installation of the 936/940 50050036AR air filter require a service visit?
No, the installation of the filter is simple and can be done by yourself. Simply remove the top cover of the chainsaw, remove the old filter, clean the chamber of debris and install the new piece in the same place. The whole operation takes just a few minutes.
What are the benefits of using an original fit filter instead of a random replacement?
The original fit filter 50050036AR guarantees a proper fit to the housing, a secure fit and effective air filtration. Random replacements with inadequate dimensions can leave gaps through which unfiltered air enters the engine, risking faster wear and costly repairs.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.