25" CHAINSAW GUIDE - 64 CM .3/8"X.058" 1,5 MM 50022041R
- Saw chain guide 25" 64 cm 3/8 "x.058" 1.5 mm 50022041R - professional, heavy-duty chain guide for intensive forestry and farm work. Ideal for cutting thick logs and firewood.
Guide bar for chainsaws 25" - 64 cm .3/8 "x.058" 1.5 mm 50022041R - professional length, precision cutting, maximum durability
25" CHAINSAW GUIDE - 64 CM .3/8 "x.058" 1.5 MM 50022041R is a high-quality chainsaw bar designed for intensive work in the forest, garden and construction sites. Appropriate length of 64 cm (25") and sturdy construction ensure efficient and precise cutting of even thick trunks and branches. It is the ideal choice for users looking for a reliable accessory for their chainsaw - both professionals and demanding home users.
The guide bar is responsible for guiding the cutting chain in the correct line, stabilizes the cut and affects the safety of work. Model 50022041R is designed to withstand long-term use, maintaining rigidity, resistance to overheating and high sawing culture.
What is a guide for chainsaws 25" - 64 cm .3/8 "x.058" 1.5 mm 50022041R?
Guide bar for chainsaws 25" - 64 cm .3/8 "x.058" 1.5 mm 50022041R is the metal work piece on which the cutting chain moves. Together with the chain, it forms the basic cutting set of any chainsaw. Its task is to keep the chain in the cutting axis, minimize its vibration and ensure smooth movement of the links during operation.
The guide is made of durable steel, resistant to deformation, which allows it to work in demanding conditions - when cutting hard wood, long-term load and frequent contact with resin and dirt. The 25" (64 cm) length allows effortless cutting of thick logs, large logs and branches, which will be appreciated by professional woodcutters as well as users preparing large amounts of firewood.
Where the guide bar for 25" - 64 cm chainsaws is mounted .3/8 "x.058" 1.5 mm 50022041R?
The guide bar is mounted directly in the body of the chainsaw - between the clutch drum and the side guard. One end of the guide bar is attached to the saw with the appropriate mounting holes and slots, and the other end remains free, working with the cutting chain.
To properly install the guide, you need to:
- remove the side cover of the saw,
- put the guide on the mounting pivots and properly seat it in the tensioner socket,
- fit a suitable pitch chain .3/8", width of guide link .058" / 1.5 mm and number of links 88,
- adjust the chain tension, tighten the guard and recheck the tension after the first few cuts.
Proper installation ensures long life of both the bar and chain and reduces the risk of the chain slipping or jamming during operation.
Application of the guide 25" - 64 cm .3/8 "x.058" 1.5 mm 50022041R
Guide 25" - 64 cm .3/8 "x.058" 1.5 mm 50022041R is designed for use with chainsaws in demanding conditions. It will be perfect for:
- Forestry work and timber skidding - felling of medium and thick trees, limbing, cutting of logs into long or shorter sections.
- Preparation of firewood - efficient sawing of logs, trunks and branches into fireplace or boiler sections.
- Building and construction work - trimming wooden structural elements, beams, columns or sleepers.
- Economic tasks around the house and farm - Removal of thick branches, old fruit trees, cleaning up the area after storms.
Thanks to its robust design and well-chosen parameters, the guide can cope with both soft soft coniferous wood and hard hardwood species, maintaining cutting stability and high performance.
Oleo-Mac/Oregon 25" chainsaw guide bar - durability, precision and safety for everyday use
The presented guide, shown in the photo, represents the segment of long-life accessories, often used in chainsaws of reputable brands, such as Oleo-Mac with Oregon accessories. The combination of a properly selected shape, a solid steel profile and a careful edge finish means that the guide remains stable and does not easily warp, even during intensive use over many hours.
In daily use, this translates into:
- Even, clean cut - less tendency for the saw to "run away" to the side, which is especially important when cutting to length or at an angle.
- Better tool control - Stable chain guidance reduces vibration, improving comfort and precision of work.
- Greater security - Less risk of the chain getting jammed or suddenly blocked in the wood.
Such a guide is perfect for felling trees on clearcuts, cutting logs for lumber logs, as well as for any utility work where repeatability and repeatable accuracy of cutting is important.
Key technical data of the guide for chainsaws 25" - 64 cm 50022041R
The most important technical parameters of the product are summarized below:
Chain saw guide bar:
- Length: 64 cm - 25"
- Pitch: .3/8'' x .058''
- Guide link width: 1.5 mm
- Number of cells: 88
This combination of parameters means that the bar works with the popular type of chains with a pitch of 3/8", designed for both semi-professional and professional chainsaws. A groove width of 1.5 mm (0.058") and a link count of 88 ensure optimum mating with the chain, which has a direct impact on the operating culture, steering precision and life of the entire cutting set.
In practice, this means that the user gains:
- easy availability of replacement chains - The 3/8" pitch and 1.5 mm thickness are very popular standards,
- reliable cooperation with many models of saws - especially those with the power to make full use of the guides 25",
- optimum balance between cutting speed and durability - the combination of chain length and dimensions guarantees high performance.
Utility advantages of the 25" guide - comfort, efficiency and longer equipment life
Choosing the right guide bar has a direct impact on the comfort of your daily work with the saw. The 50022041R is designed to provide maximum support to the user in demanding tasks:
- Comfortable work for a long time - Stable chain guidance reduces vibration, so hands and arms get less tired. You will appreciate it when cutting several or more cubic meters of firewood in one day.
- Greater cutting efficiency - Precise 25" length allows for cutting thick logs without frequent turning of the material, which reduces processing time and increases the speed of work.
- Saw and chain protection - A well-fitted guide bar distributes loads evenly, which reduces wear on the clutch, drum and drive sprocket and extends the life of the chain.
In practice, this means real savings - you buy a new chain less often, the saw stays in full working order for longer, and the risk of costly repairs due to overloading is significantly reduced.
Forest, farm and business applications - how you will use the 50022041R guide on a daily basis?
Guide bar for chainsaws 25" - 64 cm .the 3/8 "x.058" 1.5mm 50022041R is a versatile solution that will work in many scenarios:
- Forestry and lumber work - Precise cutting of thick logs at an angle when harvesting lumber or construction timber.
- On-farm operations - Rapid preparation of firewood, removal of volunteer trees, regulation of tree canopies on baulks.
- Municipal and service work - cleaning up areas after windstorms, cutting down hazardous trees, caring for large trees in parks and on properties.
- Construction and renovation - Cutting beams, columns and scantlings, as well as work on wooden structures with larger cross sections.
Thanks to its universal parameters and robust design, the guide will be a reliable support both on professional assignments and at home cleaning or preparing wood for winter.
FAQ - Frequently asked questions about the 25" - 64 cm chainsaw bar .3/8 "x.058" 1.5 mm 50022041R
1. How to choose the right chain for this bar?
For 25" guide - 64 cm .3/8 "x.058" 1.5 mm 50022041R pitch chain should be used 3/8", width of guide link 1.5 mm (.058") and the number of drive cells 88. Only such a set will ensure proper operation, safety and long life of the attachment.
2. Is the 25" guide suitable for less experienced users?
Yes, but keep in mind that the 25" guide is mainly for larger saws and more serious work. For beginners, it is recommended to use shorter guides, easier to control. However, if you work with thicker wood on a regular basis and have a sufficiently powerful saw, this model will provide high performance with complete safety of use.
3. How to take care of the slide to serve as long as possible?
Regularly check the chain tension, make sure the chain is properly lubricated, and from time to time reverse the bar (swapping the top with the bottom) to wear the edges evenly. Avoid working with dull chains and contact of the bar tip with soil, rocks or metal parts - this will significantly extend its life.
4. Isn't the 25" length too long for backyard work?
If you occasionally cut single branches or small wood, a shorter guide bar may be more convenient. However, when preparing larger quantities of fuel or cutting thick logs, the 25" length proves to be very practical - it reduces the turning of the material and significantly speeds up the work.
5. Does this guide fit any chainsaw?
Not. To select a guide bar, check the saw's manual for the maximum allowable bar length and the compatibility of chain pitch and groove thickness. Model 50022041R works with saws suitable for 25" bar and chain with 3/8" pitch and 1.5 mm link width.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.