DRILL BLADE 200 MM 375100094AR
- BARE TOOL DRILL 200 MM 375100094AR - replacement blade for MTL51, MTL81R, MTL85R soil auger. Durable steel, high drilling efficiency for posts, plantings and small garden architecture. Ideal for construction and gardening work.
DRILL BLADE 200 MM 375100094AR is a high-quality, replaceable working blade designed for augers and soil drills. This element is responsible for the effective cutting and picking of soil when drilling holes in the ground, so its condition directly affects the speed and comfort of work. Precisely shaped cutting edge and mounting holes ensure a perfect fit with compatible auger models.
Destination MTL51 MTL81R MTL85R
What is the blade for the drill 200 mm 375100094AR?
The blade for the 200 mm drill 375100094AR is a replaceable cutting element mounted on the end of a 200 mm diameter soil auger. It is the one that initiates the cutting and grinding of the soil, allowing efficient drilling of holes for fence posts, structure supports, tree and shrub plantings or elements of small garden architecture. Made of durable tool steel, it is characterized by high resistance to abrasion and mechanical damage, which allows you to maintain high drilling efficiency for a long time.
The blade is distinguished by its simple but thoughtful design - it has two mounting holes that allow you to quickly remove the worn part and insert a new one. This allows the user to easily restore the drill to full function without having to purchase the entire auger.
Where the blade for the 200 mm drill 375100094AR is mounted?
The 375100094AR blade is mounted on the working end of a soil auger or earth drill rig. It is designed to work with dedicated equipment models: MTL51, MTL81R and MTL85R. The mounting holes in the blade are matched to the factory bolt spacing on these augers, ensuring a secure fit and stable operation even in hard, compacted soils.
The installation process is quick and uncomplicated - usually limited to:
- protection of the device against accidental activation,
- loosen the screws holding the worn blade,
- removing the old cutting element and cleaning the mounting surface,
- apply a new 375100094AR blade and center the holes,
- accurate tightening of mounting screws.
Such a solution makes it possible to replace the blade by both a professional and an amateur user - without specialized tools.
Application of blade for drill 200 mm 375100094AR
The 200 MM auger blade 375100094AR is used wherever precise and fast drilling of holes in the ground with a soil auger is necessary. It will be perfect for construction, gardening and fencing work.
Typical application examples:
- Construction of fences - drilling holes for fence posts made of wood, steel or concrete.
- Gardening work - making holes for planting trees, shrubs, support posts or elements of irrigation systems.
- Small garden architecture - preparation of holes for point foundations of gazebos, pergolas, pole terraces or sheds.
- Other earthworks - holes for flagpoles, signs, information boards, parking posts, etc.
Thanks to the appropriately shaped cutting edge, the blade will cope with both light and medium-compact soils. A well-chosen and sharp blade significantly reduces the load on the machine's engine and also reduces the operator's effort.
Key benefits of the 375100094AR blade
Choosing a branded blade for the 200 mm 375100094AR drill bit is an investment in convenience and safety at work. Key benefits include:
- High drilling efficiency - sharp and properly shaped edges allow the auger to quickly penetrate the ground and efficiently remove the excavated material.
- Longer equipment life - the right cutting element relieves the load on the engine and transmission, resulting in less wear and tear on the entire machine.
- Saving time and money - Instead of buying a new auger, just replace the blade periodically, which significantly reduces operating costs.
- Safety of use - Stable mounting and dedicated designation for specific models reduces the risk of backlash and uncontrolled vibration during drilling.
Soil auger blade 200 mm 375100094AR for models MTL51, MTL81R, MTL85R - robust design and secure fit
Model 375100094AR has been specially developed for the soil augers and drills of the series MTL51, MTL81R and MTL85R. This dedicated fit means that the user gets a component that fits their equipment perfectly, without the need for alterations or matching holes. This is important especially in professional work, where reliability and predictability of performance are important.
Durable blade steel provides abrasion resistance when exposed to sand, fine gravel or compacted soil. Even with intensive use for a long time, the edge retains its cutting properties, and if it wears out, it can simply be replaced with a new piece - the same model of blade. With this:
- fence installation crews drill dozens of holes a day with no downtime,
- garden companies prepare plantings in a short period of time, maintaining high quality work,
- individual users efficiently carry out backyard work, without the need for frequent sharpening or replacing the entire auger.
Practical examples of using the 375100094AR blade in everyday work
The replacement blade for the 200 mm drill bit, symbol 375100094AR, is an inconspicuous but key component of the entire drilling system. In practice, this means a real facilitation of work in many industries:
- Property fences - when installing mesh, panel or wood fences, make a series of even holes. A good blade ensures that each hole is made quickly and with the correct diameter, making it easy to set the posts.
- Garden installations - When creating structures for gazebos, sheds, pole terraces or pergolas, drilling accurate holes at the proper spacing is crucial to the stability of the structure.
- Orchard and nursery farming - when establishing new plantings (trees, ornamental shrubs, hedges), the auger with a 200 mm blade allows you to quickly prepare serial holes, reducing time and physical effort.
- Installation of information and security elements - holes for signs, railings, parking posts or signs can be made efficiently, even in harder soils, minimizing downtime.
Why choose a 200 mm drill blade 375100094AR?
Choosing the right blade for a soil auger is crucial to the comfort and economy of your work. When choosing a model 375100094AR, you gain:
- compatibility assurance with popular auger models MTL51, MTL81R, MTL85R,
- solid workmanship, based on durable materials and precision machining,
- easy installation and replacement thanks to mounting holes that match the original mounting screws,
- stable drilling parameters - Holes with a regular shape, without excessive tearing of the ground,
- saving time during intensive earthworks.
It is the ideal choice for both construction and gardening companies and individual users who want reliable equipment for occasional but demanding work around the house or on a plot of land.
FAQ - Frequently asked questions about the 200 mm drill blade 375100094AR
Question 1: For which auger models does the 375100094AR blade fit??
Answer: The 375100094AR blade is designed for use with augers and soil drills of models MTL51, MTL81R and MTL85R. This way you can be sure that the item will fit your device properly.
Question 2: Can I replace the blade in my auger myself?
Answer: Yes, replacing the blade is usually easy and can be done by yourself. Simply secure the unit, loosen the screws holding the worn blade, remove it, insert the new 375100094AR blade and re-tighten the screws. It is always a good idea to follow the device manufacturer's recommendations.
Question 3: For what work is the 200 mm drill blade best suited??
Answer: The 200mm diameter is ideal for drilling holes for fence posts, spot foundations for garden structures, tree plantings and installation of various types of posts and poles. It works well in both construction and gardening work.
Question 4: Every how much should the blade in the auger be replaced?
Answer: The frequency of replacement depends on the intensity of use and the type of soil. If you notice that the auger is slower to enter the ground, requires more pressure or leaves jagged hole edges, it's a signal that the blade is worn out and worth replacing with a new 375100094AR model.
Question 5: Can the blade handle hard, compacted soil?
Answer: The blade is designed to work effectively in typical soil conditions - from light to moderately compact soils. For very hard, rocky soils, adjust your working technique and remember that the presence of large stones can accelerate the wear of any cutting element.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.