DRILL BLADE 150 MM 375100093AR
- Drill blade 150 mm 375100093AR - replacement cutting tip for MTL51, MTL81R, MTL85R soil augers. High-quality steel, two mounting holes, quick installation, precise drilling of holes in the ground.
Drill blade 150 mm 375100093AR - precise cutting and reliable operation of the soil auger
Drill blade 150 mm 375100093AR is a high quality work piece designed for augers and soil drills with a diameter of 150 mm. It is an interchangeable steel cutting blade designed to effectively shred and select soil when drilling holes for posts, foundations, tree and shrub plantings and other earthworks. Thanks to its robust design and the appropriate profile of the working edge, the blade ensures smooth penetration into the ground, stable operation of the machine and extended life of the entire drill bit.
Destination MTL51 MTL81R MTL85R
What is the blade for the drill 150 mm 375100093AR?
The blade for the 150 mm drill 375100093AR is a replacement cutting bit that attaches to the auger of the soil drill. It is this element that is responsible for the proper undercutting and crushing of the soil, so that the spiral working part can efficiently bring the excavated material to the surface. The blade is made of durable tool steel, resistant to abrasion and mechanical damage from contact with stones, roots or compacted layers of earth.
Model 375100093AR is designed for professional use - in gardening, service, construction companies, but also on farms and home gardens, where reliability of equipment and repeatable quality of drilling each hole counts.
Where the blade for the 150 mm drill bit 375100093AR is mounted?
The 150 mm blade 375100093AR mounts directly on the working end of the soil drill, in place of the original cutting blade. Two mounting holes allow the blade to be securely and stably bolted to the auger body. Such a solution makes the replacement of a worn out component quick and easy - you can do it yourself, without specialized tools.
The blade is designed to work with selected models of soil drills and augers:
- MTL51 - light and medium garden and installation work,
- MTL81R - more intensive applications in service and construction companies,
- MTL85R - jobs requiring more power and drilling capacity.
Matching these models ensures correct blade angle, optimum excavated material removal and reduced drive load. This translates into lower fuel or energy consumption, lower failure rates and greater operator comfort.
Application of blade for drill 150 mm 375100093AR
Drill blade 150 mm 375100093AR will be used wherever you need to make precise, repeatable holes in the ground. A diameter of 150 mm is one of the most common sizes for gardening, construction and installation work, so a replacement blade for such a drill allows you to maximize the life of the whole set.
Key application areas:
- Fences and light structures - drilling holes for fence posts, shelter posts, pergolas, gazebos and light point foundations.
- Orchard and horticulture - Preparation of sites for planting trees, shrubs, vines, support poles in orchards and plantations.
- External installations - making holes for lighting poles, masts, information boards, bicycle racks or elements of small urban architecture.
- Earthworks around the house - drilling for point foundations of pillar terraces, external stairs, wooden and steel structures.
By using the dedicated 375100093AR blade, you maintain the original auger's cutting parameters, which translates into even hole edges, easier post embedding and less need for manual correction of the bore shape.
Soil drill blade 150 mm 375100093AR - quality, durability and work safety
By choosing the blade for the soil drill 150 mm 375100093AR, you are investing in a component that directly affects the safety and convenience of your work. Carefully selected material and the right hardening process ensure high edge resistance to dulling, even under heavy use. Stable two-point mounting minimizes the risk of the workpiece coming loose during drilling, which is especially important when working in harder soils.
A long-lasting blade also means real savings - a less frequently replaced work piece means lower operating costs, less downtime and greater productivity for the entire team. In daily practice, when building fences on a large property or installing dozens of lighting poles, a good blade allows you to seamlessly complete the entire scope of work without having to constantly sharpen or replace the drill bit.
Key benefits of 150 mm blade 375100093AR for models MTL51, MTL81R, MTL85R
- Perfect fit for specific equipment models - The blade is designed for MTL51, MTL81R and MTL85R, eliminating installation problems and ensuring optimal performance.
- High drilling efficiency - the appropriate geometry of the cutting edge allows you to quickly penetrate different types of soil (light, medium, locally compacted soils), reducing the time required to drill one hole.
- Versatility of applications - a single blade allows you to carry out a wide range of work: from light garden work, to fence installation, to tasks carried out by professional construction companies.
In practice, this means that with one set of 150 mm drill bits with blade 375100093AR, you can complete a range of tasks in a single working day - from preparing holes for fence posts on private property, to spot foundations for a carport, to drilling for supports for steel structures on a construction site.
How to take care of the blade for the drill 150 mm 375100093AR to serve as long as possible?
To realize the full potential of the 375100093AR blade and extend its life, it is worth following a few simple operating rules:
- Regularly check the condition of the cutting edge - after finishing work, remove from the blade debris of soil and stones, inspect its surface for chipping or excessive dullness.
- Avoid prolonged work in extremely harsh conditions - if you encounter stony ground or concrete elements, take breaks and do not overload the device to avoid damaging the blade.
- Store the drill in a dry place - after work, it is a good idea to protect the blade from corrosion, such as by cleaning and lightly oiling it, especially when the equipment will not be used for a long time.
Such simple steps ensure that the blade retains its cutting properties longer, and that the entire drill bit works safely and efficiently - both for single drills in the home garden and for long-term commercial jobs.
Why choose 150 mm drill blade 375100093AR for professional and amateur use?
The 375100093AR blade is an ideal choice for both professionals and demanding individual users. Professionals will appreciate its durability, repeatable drilling results, and reduced equipment downtime, while private users will appreciate its easy installation, rapid progress in the garden, and the satisfaction of self-performed tasks.
By reaching for a dedicated blade for the 150mm drill bit, you will gain:
- compatibility assurance with the popular MTL51, MTL81R, MTL85R models,
- ease of installation thanks to two fixing holes appropriately located in the body of the blade,
- saving time and effort - Drilling is faster, and the equipment tires less even with a series of dozens of holes,
- lower failure rate auger and drive, resulting in lower service and operating costs.
This is a practical solution wherever not only the price of the spare part matters, but, above all, the comfort and safety of daily work.
Technical highlights of the 150 mm drill blade 375100093AR
- Purpose: drills/soil augers with a diameter of 150 mm.
- Compatibility: MTL51, MTL81R, MTL85R.
- Product code: 375100093AR.
- Design: steel blade with two mounting holes.
- Function: the primary cutting element responsible for cutting and crumbling the soil.
These features make the blade a reliable operating component for anyone who uses a 150 mm soil drill and expects stable, repeatable hole quality.
FAQ - Frequently asked questions about the 150 mm drill blade 375100093AR
Question 1: Will the 375100093AR blade fit other drill models than MTL51, MTL81R, MTL85R?
Answer: The blade is designed to work with MTL51, MTL81R and MTL85R models. Theoretically, it can also fit other devices with similar hole spacing and drill diameter of 150 mm, but before installation, you should independently verify the compatibility of dimensions and mounting method.
Question 2: How often do you need to replace the blade in the soil drill?
Answer: The frequency of replacement depends on the intensity of use, the type of substrate and the way the equipment is operated. When working in light to medium soils, the 375100093AR blade can serve for a long time, while in hard, stony soils wear out faster. Replacement is determined by the degree of blunted edges or visible chipping.
Question 3: Are specialized tools needed to replace the blade?
Answer: No, blade installation and removal usually requires only standard screw wrenches. Simply unscrew the old blade, clean the mounting surface, and then screw in the new one, making sure the screws are tightened securely.
Question 4: Can the blade be sharpened or should it always be replaced with a new one?
Answer: Gentle sharpening is possible, as long as there is no deep chipping or serious damage to the material. However, the original edge geometry should be maintained and not too much material should be removed. In case of significant wear or deformation, it is safer and more efficient to use a new blade.
Question 5: For what work is the best drill bit 150 mm with blade 375100093AR?
Answer: The 150 mm diameter is ideal for holes for fence posts, point foundations of wooden and steel structures, tree and shrub plantings, as well as for lighting poles and garden landscaping elements. Thus, one drill bit with this blade covers most typical household and professional applications.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.