DRILL BLADE 100 MM 375100092AR
- Drill blade 100 mm 375100092AR for drill rigs MTL51, MTL81R, MTL85R. Hardened steel, high wear resistance, fast installation, effective drilling in soil and clay.
Drill blade 100 mm 375100092AR - professional replacement blade for MTL51 / MTL81R / MTL85R drilling machines
The 100 mm drill blade 375100092AR is a specialized replacement cutting blade designed for soil augers and drill rigs. This component is responsible for precisely cutting and breaking up the soil, making drilling faster, lighter and with less strain on the entire drive system. The blade is compatible with drill bits with a diameter of 100 mm and is a high-quality wear part for machines operating in demanding field conditions.
Destination MTL51 MTL81R MTL85R
Drill blade 100 mm 375100092AR - construction, installation and compatibility with models MTL51 / MTL81R / MTL85R
Drill blade 100 mm 375100092AR is a solid, one-piece cutting segment made of hardened steel, suitable for intensive work in soil, clay, sand or partially stony mixtures. The distinctive shape with a mounting hole allows quick and secure installation in the bottom of the soil auger. As a result, the blade can be easily replaced in the field without having to remove the entire drill bit.
This element is designed to work with drill rigs and augers dedicated to models:
- MTL51 - light to medium domestic, garden and installation applications,
- MTL81R - intensive drilling rigs used m.in. in fence installations and earthworks,
- MTL85R - more powerful units for professional and service applications.

Durability, sharpness and reliability of the drill blade 100 mm 375100092AR in daily work
The 375100092AR blade is designed for long, trouble-free use. Made of high-quality, properly hardened steel, the cutting edge retains its sharpness for a longer period of time, even with regular drilling in compact and difficult ground. Abrasion resistance means less frequent replacement, which directly translates into lower operating costs for the entire rig.
A well-maintained and sharp blade for the drill:
- reduces drilling resistance - the motor or hydraulic drive operates with less load,
- provides an even, clean hole - makes it easier to set fence posts, point foundations and pipes,
- increases safety of work - the machine does not "jerk" and does not wedge in the ground.

Application of blade for drill 100 mm 375100092AR - garden, construction and installation work
Drill blade 100 mm 375100092AR is used wherever it is necessary to make precise, deep holes in the ground with an earth drill rig. The 100mm diameter is one of the most common in practice, so this blade model will work well for many common tasks:
- Installation of garden fences and railings - preparation of holes for steel, wooden or composite posts.
- Foundation work - drilling point foundations for sheds, pergolas, gazebos, carports or light wooden structures.
- Garden installations - making holes for irrigation pipes, drainage pipes or elements of drainage systems.
- Orchard and horticulture - Preparation of planting holes for trees, shrubs and structural poles for orchard crops.
- Service and professional work - use in construction, gardening, installation companies and in the installation of advertisements, banners and billboards.
The interchangeable blade means that one drill rig equipped with the right auger can successfully handle both small backyard projects and larger jobs carried out by professional teams. Just keep a set of spare blades on hand to avoid downtime at work.

Benefits of using the original blade for the 100 mm 375100092AR drill bit
Buying a genuine 100 mm 375100092AR drill blade is an investment in equipment reliability and user safety. A perfect fit for the auger and the MTL51, MTL81R and MTL85R models ensures:
- Hassle-free installation - properly selected mounting hole and blade geometry make the element stably adhere to the drill body, eliminating the risk of backlash and vibration.
- Full performance of the device - a blade designed for a specific drilling system allows maximum use of the machine's power, which reduces the time it takes to drill a hole.
- Longer life of the entire auger - properly working blade reduces excessive wear of other working components, such as guides and auger.
In the case of frequent operation in demanding ground, the use of original consumable parts minimizes the risk of failure, as well as the loss of the manufacturer's warranty on the machine. The customer receives a product that meets stringent quality standards, is dimensionally reproducible and ready for immediate use out of the box.

How to properly use and replace the 100 mm drill blade 375100092AR?
To get the most out of the 100mm 375100092AR drill blade, it's a good idea to follow a few simple operating rules:
- Regular monitoring of wear and tear - before each start of work, check the condition of the cutting edge, any chips or cracks.
- Safe exchange - blade change is performed with the machine turned off, after disconnecting the power source or drive, using appropriate wrenches and protective gloves.
- Cleaning after work - after drilling, the blade and auger should be cleaned of soil, stones and organic debris, which reduces corrosion and accelerated abrasion.
By adhering to the above rules, the blade maintains its performance for a long time, and the user can count on repeatable, precise drilling results in all field conditions.

Key features of the drill blade 100 mm 375100092AR - summary for demanding users
- Designed for MTL51, MTL81R, MTL85R drilling rigs.
- Drill working diameter: 100 mm - versatile use in the garden, construction and installations.
- Made of durable, hardened wear-resistant steel.
- Precision mounting hole for fast installation and stable operation.
- Ability to quickly replace in the field, without specialized tools.
- High drilling efficiency and less strain on the drill drive system.

FAQ - Frequently asked questions about the 100 mm drill blade 375100092AR
Question 1: For which drill models does the 100 mm blade 375100092AR fit??
The 375100092AR blade is designed to work with drills and augers dedicated to MTL51, MTL81R and MTL85R models. Before buying, it is a good idea to compare the markings on the auger you have and make sure that the diameter of the drill bit is 100 mm.
Question 2: Can the 375100092AR blade be installed by itself?
Yes, the installation of the blade is simple and can be done by yourself, provided you follow basic safety rules. All you need to do is disconnect the machine drive, remove the worn blade, clean the contact area, and screw on the new blade using the appropriate retaining screw.
Question 3: How often should the blade for the 100 mm drill be replaced?
The frequency of replacement depends on the intensity of work and the type of substrate. When drilling in light soil, the blade can last for a long time, while in rocky soil, wear occurs more quickly. Replacement is determined by visible dulling of edges, chipping or a decrease in drilling efficiency.
Question 4: Is the blade suitable for drilling in very hard, rocky ground?
The 375100092AR blade is made of durable steel and performs well in compacted soils and soil containing small stones. However, in the case of very rocky ground, it is recommended to take extra caution, work at lower speeds and regularly check the condition of the blade.
Question 5: How to store the blade when not in use?
After use, the blade should be cleaned of soil and moisture and stored in a dry place, preferably in its original packaging or in a tool box. This treatment minimizes the risk of corrosion and extends the life of the cutting element.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.




