SANDBLASTING LANCE 33070771
- Sandblasting lance 33070771 for Oleo-Mac PW 300 HC washer - professional water-abrasive sandblasting. Ideal for removing rust, old paint, varnish and scale from metal, concrete, brick and stone.
PIASKING LANCE 33070771 for Oleo-Mac PW 300 HC high-pressure washers - professional cleaning of rust, paint and scale
SANDBLASTING LANCE 33070771 is a professional attachment for high-pressure cleaners, designed to effectively and quickly remove the most stubborn dirt. Thanks to the use of high-pressure water jet with an admixture of abrasive (sand), the lance can perfectly cope with rust, old varnish, scale and other contaminants on metal, concrete, stone or wooden surfaces.
Very practical and easy to use, allows you to smooth any surface eliminating rust, varnish and scale deposits.
Fits to the following Oleo-Mac washers: PW 300 HC
Review photo
What is the PIASKING LANCE 33070771 and how it works?
Sandblasting lance 33070771 is a complete accessory to transform a standard Oleo-Mac PW 300 HC high-pressure washer into a powerful sandblasting device. It uses the Venturi effect - a strong jet of water sucks the abrasive from the hose, mixing it with the water and directing it onto the surface to be cleaned. This makes sandblasting safer and less dusty than traditional dry sandblasting, yet very effective.
In practice, this means that the user gets two devices in one: a high-pressure cleaner and a water-washing function for heavy renovation work. Just mount the lance, connect the suction hose to the abrasive container and you can get to work.
- Effectiveness - Aggressive but controlled action of the water-abrasive jet.
- Versatility - ability to clean metal, concrete, brick, stone and wood.
- Security - dust reduction compared to classic dry sandblasting.
Where you mount the sandblasting lance 33070771 on the Oleo-Mac PW 300 HC washer?
Sandblasting lance 33070771 is specially designed for compatibility with high-pressure cleaner Oleo-Mac PW 300 HC. Assembly is quick and intuitive, so even less experienced users can handle getting the equipment ready for use.
Basic installation steps:
- Disconnect the standard lance pressure from the gun of the PW 300 HC washer.
- Screw on the sandblasting lance 33070771 in place of the factory lance, using a dedicated connection.
- Connect the flexible abrasive suction hose to the spigot of the lance, and place its other end in a container with sand or other suitable abrasive.
- Check the tightness of the connections and only then start the washer, gradually increasing the operating pressure.
With a matching connection, the lance 33070771 perfectly fits the Oleo-Mac system, reducing the risk of leaks, pressure drops or uncontrolled water spills. This is especially important in professional work - in workshops, industrial plants, construction companies or machine services, where repeatability and reliability are important.
Examples of daily application of correct assembly:
- Renovation of car trailers - a quick changeover from the washing lance to the sand lance allows you to wash and then clean rust from the entire frame in one sitting.
- Cleaning steel rims - after washing with a standard lance, simply switch to a sandblasting lance to remove old paint finishes.
- Maintenance work on the farm - easy connection to the PW 300 HC washer allows efficient operation of multiple machines in a short period of time.
Application of sandblasting lance 33070771 - where it will work best?
Sandblasting lance 33070771 is a tool with a very wide range of applications. It will perform well in both domestic applications, as well as in professional renovation work. Thanks to its robust design and the use of a water-abrasive jet, it can be used to clean even difficult and irregular surfaces that are difficult to reach with traditional methods.
Typical application areas:
- Rust removal from trailer frames, wickets, gates, railings, railings, steel structures and machine elements.
- Stripping old varnish and paint from metal fences, rims, agricultural machinery or body parts (with the proper distances and working parameters).
- Cleaning of concrete, brick and stone - Removal of efflorescence, tarnish, graffiti, mortar residue or atmospheric dirt.
- Preparation of the substrate for painting and corrosion protection - Creating a slightly rough, perfectly cleaned surface for new coatings.
User benefits:
- Saving time - work that would take many hours by hand can be done in a dozen minutes.
- Better end result - More thorough cleaning of surface pores, inaccessible crevices and edges.
- Lower costs - No need to use the services of external sandblasting companies.
Examples of practical use:
- Renovation of old metal gate before painting - removal of peeling paint and rust along welds and in hard-to-reach corners.
- Cleaning concrete steps or terrace from perennial dirt and lichens.
- Preparation of steel rims for powder coating or spray painting.
Oleo-Mac sandblasting lance 33070771 - quality, durability and reliability for everyday work
The SPRAYING LANCE 33070771 was made of high-quality materials resistant to corrosion and intensive use. Metal working elements and robust connectors ensure the stability of the jet and long life of the accessory, even with regular use in harsh workshop or construction conditions.
Key quality features:
- Durable metal bodies - resistant to mechanical damage and abrasion caused by flowing abrasive.
- Precision water and abrasive mixer - Uniform stream for repeatable cleaning effect.
- Flexible suction hose - Facilitates convenient positioning of the abrasive container at a convenient working location.
Such design solutions make the lance 33070771 well suited for intensive, everyday use by professionals, but is also an excellent choice for demanding individual users who expect years of trouble-free operation from their equipment.
Examples of applications where durability matters:
- Historic vehicle restoration companies - frequent sandblasting of load-bearing components and body details.
- Locksmith and welding shops - ongoing cleaning of structures before welding and painting.
- Construction companies - cleaning of steel elements on site and concrete structures.
Key benefits of buying a sandblasting lance 33070771 for your workshop or home
Investing in a lance for sandblasting 33070771 is not just the purchase of another accessory for the washer, but above all extension of the functionality of the entire cleaning system. With one simple-to-install tool, you can perform work that previously required specialized services or expensive equipment.
Business and utility benefits:
- Greater range of services - for washing companies, service shops and workshops the possibility of introducing the service of sandblasting of elements.
- Self-renovations - for home users the option to carry out repairs and restoration of gates, fences, rims or landscaping elements.
- Cost optimization - one device (washer PW 300 HC) performs the function of a classic washer and sandblasting tool.
With the lance 33070771 you gain more control over the surface preparation process - you can thoroughly clean only selected areas, adjust the intensity of the jet and adapt the type of abrasive to the material being worked on.
Data and technical information of sandblasting lance 33070771
- Product: Sandblasting lance 33070771
- Purpose: water-abrasive sandblasting using high-pressure washers
- Compatibility: high-pressure washer Oleo-Mac PW 300 HC
- Type of work: removal of rust, old paint and varnish, scale, concrete and stone deposits
- EAN code: 8026619035112
- Manufacturer/System Code: 33070771
- Abrasive type: typical sandblasting abrasives (e.g., quartz sand selected according to the recommendations of the washer and accessory manufacturer)
Thanks to the above parameters, the lance perfectly complements the equipment of owners of Oleo-Mac PW 300 HC washer, offering a professional level of cleaning while maintaining the simplicity of operation characteristic of home-professional equipment.
FAQ - Frequently asked questions about the sandblasting lance 33070771
1. Which washers the sandblasting lance fits into 33070771?
The lance is designed to work with a high-pressure washer Oleo-Mac PW 300 HC. With the appropriate connectors, it provides a secure and tight connection to the gun of this washer.
2. What I can clean with a sandblasting lance?
With the lance 33070771 you can remove r dz, old varnish, paint, scale and heavy dirt from metal, concrete, stone surfaces and - with properly selected parameters - also from selected wooden elements.
3. Is the operation of the lance complicated?
Not. The lance is very practical and easy to use. Just connect it in place of the standard lance of the PW 300 HC washer, and place the suction hose in the abrasive container. When the washer is started, the water jet will begin to suck up the abrasive and direct it onto the surface to be cleaned.
4. What abrasive can be used with the lance 33070771?
The most common application is sand for sandblasting or other fine-grained abrasives recommended for use with high-pressure washers. It is important that the grain fraction and type of material are matched to the surface to be cleaned and the manufacturer's recommendations.
5. Is sandblasting with water safer than dry sandblasting?
Yes, water-abrasive sandblasting generates significantly less dust than traditional dry sandblasting, which improves the comfort and safety of work. However, basic personal protective equipment such as goggles, gloves and work clothes should always be used.
6. Can I use lance 33070771 at home?
Yes, the lance is also perfect for advanced home users. Allows independent renovation of fences, gates, rims, steel structures or landscaping elements, which significantly reduces the cost of renovation.
7. How to take care of the lance after the work is done?
After finishing sandblasting, it is a good idea to rinse the lance with clean water for a few minutes rinse the lance with clean water without abrasive to remove residual abrasive from the wires. This will make the working parts less vulnerable to wear and corrosion, which will translate into a longer life of the accessory.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.