4 M HOSE 3208065200
- HOSE 4 M 3208065200 - professional, flexible suction hose 4 m / 35 mm for industrial and workshop vacuum cleaners OMV31, OMV32 and other models with 35 mm connection. Ideal for dust, chips and repair work.
HOSE 4 M 3208065200 - professional, flexible suction hose 4 m for industrial vacuum cleaners OMV31 / OMV32
Hose with a length of 4 m and a diameter of 35mm.
It is standard equipment on OMV31 and OMV32, but can also be used on other models.
What is 4 M hose 3208065200?
HOSE 4 M 3208065200 is a high-quality, flexible suction hose designed for use with industrial and workshop vacuum cleaners. With a length of 4 meters and a diameter of 35 mm, it provides a convenient working range, effective dirt extraction and compatibility with a wide range of accessories and working tips. It is the factory standard equipment of OMV31 and OMV32 vacuum cleaners, and it is also a universal component of the extraction system, which can also be used on other models of vacuum cleaners with the same connection diameter.
Where the 4 M hose is mounted 3208065200?
The hose is mounted directly in the suction socket of an industrial or workshop vacuum cleaner. One end of the hose is equipped with a nozzle suitable for a solid connection to the nozzle of the vacuum cleaner, while the other can be connected to a pipe, floor nozzle, crevice brush or other cleaning accessories. With a standardized diameter of 35 mm, the hose can be connected to:
- oMV31 and OMV32 vacuum cleaners as part of the basic kit,
- other models of workshop and industrial vacuum cleaners suitable for 35 mm diameter,
- chip, dust and fine dirt extraction systems in small workshops.
Use of 4 m hose 3208065200
Hose 4 m 3208065200 will be ideal for daily work in the workshop, garage, service or construction site. Its length makes it easy to reach hard-to-reach places without having to constantly rearrange the vacuum cleaner. It can be used for:
- extraction of dust and dust while grinding, drilling, cutting or milling,
- cleaning floors, machines, workbenches and nooks and crannies in the workshop,
- removal of light wood chips, gypsum, plaster, small construction waste,
- tidying up the garage, basement, boiler room or storage facilities.
The hose's flexible design makes it easy to drive, reel and store, resulting in convenient use and space savings.
Key advantages of the 4 M HOSE 3208065200
- Length 4 m - comfortable working range without the need to constantly move the vacuum cleaner.
- Diameter 35 mm - Workshop and industrial standard, wide compatibility with vacuum cleaners and accessories.
- High flexibility - easy maneuvering in hard-to-reach places.
- Durable design - resistance to bending, abrasion and intensive use.
- Universal application - for use in the workshop, home, garage, construction site and small manufacturing plants.
- The original part of the set - Standard equipment of OMV31 and OMV32 vacuum cleaners, which guarantees a perfect fit.
HOSE 4 M 3208065200 for OMV31 / OMV32 vacuum cleaners - maximum reach and convenience of work
HOSE 4 M 3208065200 is designed for users who expect full freedom of movement when cleaning and working with power tools. The length of 4 meters allows comfortable operation in both a small garage and a larger workshop, without having to constantly rearrange the vacuum cleaner. This significantly reduces working time and operator fatigue.
An example of an everyday application is cleaning the entire machining station - from the work table, to the machine, to the space around it, with a single vacuum setting. Such a range is also great for renovation work, when you need to remove dust from several rooms without moving the device every few meters.
Thanks to its flexible design, the hose easily follows the user, does not kink abruptly and does not restrict movement. This translates into greater comfort and speed, as well as less risk of hose damage during intensive work.
Durability and flexibility of the 4 m hose - an investment for years of intensive use
The key feature of the 4 M HOSE 3208065200 is the combination of high strength and flexibility. The corrugated design protects against accidental crushing while allowing the hose to bend and run freely around obstacles, furniture, machinery or workstations. As a result, the risk of breakage or permanent deformation is significantly reduced, even with intensive work in harsh conditions (dust, sharp edges of equipment components, frequent movement).
In everyday practice, this means that the hose will easily endure constant dragging on the floor of the workshop, construction site or garage, as well as repeated coiling and unwinding. Durability translates into real savings - the need to replace the hose is less frequent, reducing service costs and downtime in operation.
For example, with regular vacuuming of repair dust or when connected to a grinder with extraction, the hose will be subject to constant movement and abrasion. Robust construction and properly selected material allow to maintain full tightness of the suction system, and thus high vacuuming efficiency for a long time.
Standard diameter of 35 mm - universal use in workshop, home and construction sites
The 35 mm diameter is standard on many workshop and industrial vacuum cleaners, making the 4 M HOSE 3208065200 an extremely versatile piece of equipment. Thus, it can be used not only as an original hose for OMV31 and OMV32 models, but also as a replacement or additional hose in other devices with the same connection cross-section.
Example applications include working with:
- dry and wet vacuum cleaners for carpentry workshops,
- construction vacuum cleaners used to clean up after sanding drywall and cutting drywall,
- vacuum cleaners in the garage for cleaning car, motorcycle, bicycle and storage spaces.
The ability to easily select different types of nozzles and tips (e.g. crevice, brush, floor) allows you to perfectly match the set to a specific task - from precise vacuuming of the interior of the car, to quick cleaning of large floor areas after renovation and construction work.
Convenience of 4 M HOSE 3208065200 - lightweight, handy and easy to store
The 4 m hose 3208065200 is designed to make daily work as less tiring as possible. Its design provides light weight with sufficient rigidity and resistance. As a result, the user does not feel overburdened even during longer cleaning or sanding sessions with dust extraction.
The lightweight design translates into convenient hose handling, for example, when vacuuming a car, when you need to maneuver around the vehicle and inside the cabin repeatedly. And the ability to easily coil into a compact spiral makes it easy to store the hose in a cabinet, on a shelf, or on the handle of a vacuum cleaner without taking up too much space.
In practice, this means that you can quickly unroll the hose before you start work, and recoil it afterwards in a few moments - without tangling or risk of mechanical damage. This is especially important in small workshops and garages, where every inch of space is at a premium.
Professional quality and reliability of the 4 M Hose 3208065200 in demanding applications
HOSE 4 M 3208065200 meets the expectations of users who need reliable equipment for work in difficult conditions - in the workshop, on the construction site or in small production. As a standard component of the OMV31 and OMV32 vacuum cleaner set, it has been selected to meet the high requirements for air tightness, air flow and resistance to external factors.
In practice, this means a consistently high suction efficiency for dust and dirt throughout the life of the hose. The appropriate design of the connections minimizes the risk of leakage, and the corrugated outer surface effectively protects against abrasion and mechanical damage. This, in turn, translates into trouble-free, reliable operation of the device - no drops in suction power or frustrating interruptions to check the installation.
The hose is used by both individual users and professionals: repair crews, carpentry workshops, locksmith shops or mechanical services. As a result, the product is proven in many different applications, which builds confidence in its quality and durability.
TECHNICAL DATA 4 M HOSE 3208065200
- Length: 4 m
- Diameter: 35 mm
- Purpose: industrial/workshop vacuum cleaners
- Primary Compatibility: OMV31, OMV32
- Additional use: can be used in other models of vacuum cleaners adapted to the diameter of 35 mm
- Color: black
- Type: suction hose, flexible, corrugated
- Product code / system code: 3208065200
FAQ - Frequently asked questions about the 4 M hose 3208065200
1. Does the 4m hose 3208065200 fit only OMV31 and OMV32 vacuum cleaners?
Not. Although the 4 M HOSE 3208065200 is standard equipment on OMV31 and OMV32 models, it can also be used on other industrial and workshop vacuum cleaners, as long as they have a 35 mm diameter connection. As a result, the hose can act as a replacement or an additional piece of equipment in many devices.
2. For what work is it best to use a 4-meter hose?
The 4 m length is ideal for both workshops and repair work. The hose is especially recommended for dust extraction from grinders, cleaning work stations, cleaning garages, basements or vehicle interiors. Allows free movement without having to move the vacuum cleaner frequently.
3. Is the hose resistant to heavy use in a workshop environment?
Yes. The corrugated design and properly selected material provide high resistance to abrasion, bending and impact, which are typical of workshop and construction environments. The hose is designed for long-term, intensive use, making it ideal for professional users.
4. Can the hose be easily stored when not in use?
Yes. The flexible hose can be quickly coiled into a compact spiral, which you can easily place on a vacuum cleaner handle, on a shelf or in a tool cabinet. This means it takes up very little space and is always ready to go whenever you need it.
5. Can different nozzles and accessories be connected to the hose?
Yes. The standard diameter of 35 mm allows the use of a wide range of accessories - floor nozzles, crevice nozzles, round brushes or specialty tips for use with power tools. This makes it easy to tailor your equipment configuration for specific tasks, from meticulous vacuuming of car interiors to quick cleaning of large areas.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.