OLEO-MAC 1.1 MM 3/8" 45 GUIDE LINK CUTTING CHAIN 30629041C
- Genuine Oleo-Mac 30629041C 3/8" 1.1 mm 45-link cutting chain for GSI 30 saws. Professional cutting quality, micro-chisel teeth, high durability, low vibration - ideal for garden and forestry work.
Oleo-Mac 1.1 mm 3/8" 45 guide link cutting chain 30629041C is an original, high-quality working chain designed for Oleo-Mac chainsaws, in particular for the model GSI 30. Designed for intensive work and ultimate user comfort, it guarantees clean, fast cutting and long life in all conditions.
This chain is distinguished by 3/8 pitch",groove width 1.1 mm and length of 45 guide links. Used micro-chisel type cutting teeth provide an ideal compromise between cutting aggressiveness and the safety and ease of driving the saw - for both professional users and demanding amateurs.
- Length 45 guide links
- pitch: 3/8"
- Chain groove width 1.1 mm
- Cutting teeth type: micro-chisel
Cutting chain for Oleo-Mac chainsaws : GSI30
Oleo-Mac 1.1 mm 3/8" 45 link cutting chain 30629041C - what it is and why you should choose it?
Oleo-Mac cutting chain 30629041C is the key working element of the saw, responsible for the quality and speed of the cut. Made of durable, hardened steel, it is designed specifically for lightweight and compact chainsaws used in gardening, horticulture, forestry and municipal applications.
This chain is characterized by modern micro-chisel tooth geometry, that have rounded working edges. With this:
- easier to keep the blade in proper focus,
- the chain less aggressively "bites" into the wood, which significantly reduces the risk of kickback,
- the saw runs more quietly, with less vibration and jerking.
In practice, this means that even during prolonged work in cutting firewood, branches or small logs, the user feels less fatigue, and the saw itself works more stably and quietly.
Where the Oleo-Mac 1.1 mm 3/8" 45-link cutting chain is mounted leading?
Model 30629041C is designed primarily for chainsaws Oleo-Mac GSI 30, but can also be used on other saws and pruners that meet the following bar parameters:
- chain pitch: 3/8",
- guide groove width: 1.1 mm,
- length of guide bar matched to 45 guide links.
To properly install the chain:
- Disconnect the chainsaw from the power source (turn off the internal combustion engine or disconnect the battery).
- Remove the saw's side cover and the existing chain.
- Put a new chain on the sprocket and guide bar, paying attention to the direction of the cutting teeth.
- Replace the guide bar in its place, attach the guard and adjust the chain tension according to the instructions of the chainsaw.
- After a short inspection job, check the tension again - a new chain tends to "lay down" slightly.
Thanks to precise manufacturing and properly sized Oleo-Mac chain installation is fast and intuitive, and a well-fitted chain significantly affects the safety and culture of the chainsaw operation.
Use of Oleo-Mac chain 30629041C - ideal for garden, orchard and forestry work
Cutting chain Oleo-Mac 1.1 mm 3/8" 45 guide links has been designed for a wide range of applications, both in the hands of private users and professionals. It will be ideal for:
- Pruning and tree care - pruning of dry and green branches, crown shaping of fruit trees, removal of offshoots.
- Preparation of firewood - cutting branches and small trunks into fireplace sections or for CO stoves.
- Cleanup work after windstorms - Removal of fallen branches and broken tree fragments, securing the area.
- Municipal and service works - maintenance of urban greenery, pruning of trees along roads, in parks and public gardens.
- Work at height - combined with a boom saw or pruner, allows you to safely cut branches without climbing the tree.
Chain type micro-chisel is particularly recommended where the combination of speed of work and high quality of cutting surface is important. Rounded tooth edges better withstand dirt (e.g., sand, bark contaminated with soil), which pays off with longer blade life between sharpenings.
The main advantages of Oleo-Mac 1.1 mm 3/8" 45-link cutting chain
Choosing oleo-Mac chain 30629041C you get a product designed with performance, durability and safety in mind.
1. Precise, fast cutting
- Micro-chisel teeth provide fast biting into the material, but still leave a smooth cutting surface.
- The chain handles both hard and soft wood very well, which is important when working in diverse conditions - from orchards to wooded lots.
- With less vibration, it is easier to maintain the cutting line, which is important for precise cutting of branches or shaping trees.
2. High durability and wear resistance
- Hardened steel and meticulous workmanship of chain components translate into long life - even under heavy use.
- Properly designed guide links minimize friction in the guide groove, which reduces overheating and wear on the entire cutting system.
- The chain stands up well to periodic contact with dirt (bark with sand, lightly soiled wood), which in practice means less frequent sharpening and lower operating costs.
3. User comfort and safety
- The gentle nature of the cut reduces the risk of sudden jerks of the saw and so-called rebound, which is crucial from a safety perspective.
- Less aggressive chain also means less fatigue for the user - especially when working for several hours, typically when preparing wood for the heating season, for example.
- Stable chain guidance in a 1.1 mm wide groove gives a feeling of full control over the tool, even for less experienced users.
Technical specifications of Oleo-Mac cutting chain 30629041C
| Manufacturer | Oleo-Mac / Emak |
| Model | 30629041C |
| Destination | Oleo-Mac chainsaws, especially the GSI 30 |
| Chain pitch | 3/8" |
| Groove width (thickness of the guide link) | 1.1 mm |
| Number of guide links | 45 |
| Type of cutting teeth | micro-chisel |
| Application | Cutting branches, firewood, maintenance work in the orchard, garden and forest area |
| Product code | 30629041C |
| EAN code | 8026619109417 |
Why it pays to bet on an original Oleo-Mac chain?
Using original accessories from the chainsaw manufacturer brings specific benefits:
- Perfect compatibility - The chain is designed precisely for the characteristics of Oleo-Mac chainsaws, ensuring optimal cutting performance.
- Greater security - secure fit to the bar and sprocket reduces the risk of chain skipping or jamming.
- Better working culture - less vibration, uniform operation and lower noise levels contribute to the comfort of the chainsaw even during prolonged use.
- Durability of the entire cutting set - properly selected chain wears less on the bar and sprocket, resulting in lower service costs.
Choosing oleo-Mac 1.1 mm 3/8" 45 link cutting chain 30629041C you are investing not only in the consumable component itself, but in the the safety of your work, the high performance of your tool and the long life of your chainsaw.
FAQ - Frequently asked questions about Oleo-Mac 30629041C cutting chain
1. What chain Oleo-Mac 1,1 mm 3/8" 45 links 30629041C chain fits to which chainsaw?
The chain was designed primarily for the chainsaw Oleo-Mac GSI 30. It can also fit other models or brands, as long as they have a guide with a 3/8" pitch, a groove width of 1.1 mm and the right length for 45 guide links. Before you buy, it's a good idea to check the specifications of your saw or guide bar.
2. What the "micro-chisel" type of teeth means?
"Micro-chisel" is a type of cutting teeth with rounded working edges. They are less aggressive than full-chisel teeth, but much more resistant to dulling and dirt. They provide smooth operation, easier sharpening and a very good compromise between cutting speed and safety.
3. How to check if the number of guide links is appropriate?
You'll usually find the number of guide links on the saw's guide bar or in the machine's manual. For this chain model, the number is 45. If your bar shows a different number, you should choose a chain of the correct length.
4. How often should you sharpen your chain?
Sharpening frequency depends on the intensity of work and the type of material being cut. If you notice during operation that the saw cuts slower, requires more pressure, or starts producing fine chips instead of long ones, the chain should be sharpened. However, micro-chisel teeth are more resistant to dulling, so they require sharpening less often than classic chisel teeth.
5. Is this chain suitable for cutting very hard woods?
Yes, the Oleo-Mac 30629041C chain can handle both soft and hard woods. With particularly demanding species (e.g. oak, beech), remember to keep the teeth sharp, properly lubricate the bar and avoid contact with the ground and stones.
6. Can I use this chain in cordless saws?
If the cordless saw has a guide bar with the following parameters 3/8", 1.1 mm, 45 guide links, then the chain will be compatible. Often, this type of chain is just what is used in modern, lightweight cordless saws used for green maintenance.
7. How to take care of a chain to make it last as long as possible?
Check tension regularly, remember to lubricate (efficient oil system of the saw), avoid cutting dirty wood and stones. After finishing work, it is a good idea to clean the chain of sawdust and resin, and if it is not in use for a long time - to lightly preserve it with oil.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.