OLEO-MAC 1.3 MM CUTTING CHAIN .325" 72 GUIDE LINKS 30629027C
- Oleo-Mac cutting chain 30629027C (.325", 1.3 mm, 72 links) is an original performance chain for Oleo-Mac GSH 51, 510, 56, 560 chainsaws. Provides fast, precise and safe wood cutting for forestry and garden work.
OLEO-MAC 1.3 MM CUTTING CHAIN .325" 72 PROVIDING BRANCH 30629027C is a high quality, original chain designed for Oleo-Mac brand saws. It is designed for maximum cutting performance, long life and safe operation - for both professional users and demanding amateurs. Thanks to the precise geometry of the links and half-shear teeth, it ensures fast, clean and stable cutting of wood in all conditions.
- Length 73 guide links
- pitch: .325"
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
Cutting chain for Oleo-Mac chainsaws : GSH 51, 510, 56, 560
Oleo-Mac 1.3 mm cutting chain .325" - what is this product and why you should choose it?
Oleo-Mac 1.3 mm cutting chain .325" 72 guide links 30629027C is the working element of a petrol or electric chainsaw, responsible for the actual cutting of the wood. It is along which the guide moves at high speed, and the sharp cutting teeth bite into the material. Original Oleo-Mac chain is made of high-quality, hardened steel, which ensures long life and stable operation even under heavy use.
The product has been matched in parameters to popular models of Oleo-Mac chainsaws, such as GSH 51, 510, 56 or 560. Pitch .325" and 1.3 mm guide link width make the chain combine high cutting aggressiveness with low drag, resulting in lower engine load and fuel consumption.
The most important advantage of this model is the semi-chisel cutting teeth. Their profile guarantees very good performance and speed of cutting while resisting dulling in more difficult conditions - for example, when cutting slightly dirty or frozen wood. It's the perfect compromise between professional speed and ease of keeping the chain sharp.
Application of Oleo-Mac 1.3 mm cutting chain .325" 72 links - the ideal choice for forest and garden work
Oleo-Mac 30629027C cutting chain will work well wherever fast and reliable wood cutting is needed. It is an excellent choice for both professional and home use:
- Forestry work and firewood harvesting - pitch chain .325" and semi chisel teeth are great for heavy cutting of trunks, branches and thick branches. Allows efficient preparation of firewood, with less operator fatigue.
- Garden and around-the-house work - pruning old fruit trees, removing dry branches, cleaning up after windstorms or cutting down volunteer trees becomes quick and convenient.
- Structural cutting - In situations where you need to cut beams, columns or other solid wood components on a construction site or during carpentry work, the chain provides a clean, straight cut.
Thanks to the optimized 1.3 mm guide link width, the chain generates a smaller cut and therefore removes less material. In practice, this means faster operation, lower power requirements for the saw and lower fuel or electricity consumption. This is important for both daily operations at the company and at the home farm.
Oleo-Mac 30629027C cutting chain assembly - which saws it fits and how to select it?
OLEO-MAC 1.3 MM CUTTING CHAIN .325" 72 GUIDING BRIDGES 30629027C is designed to be mounted on guides dedicated to Oleo-Mac chainsaws. The chain works together m.in. with the following models of chainsaws:
- Oleo-Mac GSH 51
- Oleo-Mac 510
- Oleo-Mac 56
- Oleo-Mac 560
To select a chain correctly, you need to pay attention to three basic parameters:
- Chain pitch (.325") - must match the markings on the saw's guide bar and drive wheel. Pitch .the "325" is one of the most popular in the medium-power saws, offering a very good compromise between speed and operating culture.
- Guide link width (1.3 mm) - corresponds to the width of the groove in the guide. A chain that is too wide or too narrow will work unstably, risking damage to equipment and a drop in safety.
- Number of guide cells (72 pieces) - Decide on the length of the chain and match the specific length of the bar. In this model, it is an ideal configuration m.in. for the popular Oleo-Mac chainsaws listed above.
Installation of the chain is standard: after removing the side cover of the saw and loosening the tensioner, the chain is put on the sprocket and bar, taking care of the correct direction of the cutting teeth. Then the chain is tightened so that it adheres to the bar, but you can still lift it slightly with your hand. Proper tension is critical to chain life and user safety.
Oleo-Mac 1.3 mm cutting chain .325" 72 cells 30629027C - quality, durability and user safety
The original Oleo-Mac chain is distinguished by its high precision manufacturing and the use of proven technical solutions that affect the comfort and safety of work:
- Semi-chisel type cutting teeth - their profile is designed to guarantee a high cutting performance on the one hand, and on the other - greater resistance to dulling and sharpening errors than in the case of full chisel (chisel) teeth. This keeps the chain sharper longer, which will be especially appreciated by users who make many cuts a day.
- Stability of guidance in the cut - properly selected link width of 1.3 mm and geometry of guide links minimize vibration and "floating" of the chain in the wood. In practice, this means more accurate cuts, less risk of jamming, and greater operator comfort.
- Hardened steel and solid rivets - Resistance to stretching and mechanical damage translates into long chain life. With proper use and regular sharpening, you can count on many seasons of efficient operation.
User safety is a priority. Properly shaped pit stops reduce the aggressiveness of the chain, reducing the tendency to bounce (kickback). Combined with the factory quality of the link and rivet assembly, you get a product that you can use with confidence both in a professional sawmill and in your garden.
User benefits - why Oleo-Mac chain 30629027C is an investment for years to come?
Selection of original Oleo-Mac 1.3 mm cutting chain .325" 72 cells offer a number of tangible benefits:
- Higher productivity - Sharp semi-shear teeth and optimized chain geometry mean faster wood cutting, shorter working time and less strain on the operator.
- Lower operating costs - less cutting resistance means lower fuel or energy consumption, less strain on the engine and slower wear on the guide bar. The chain stays sharp longer, reducing the frequency of sharpening.
- Seamless compatibility with Oleo-Mac chainsaws - Buying an original product with the code 30629027C, you are assured of full compatibility with the marked models of saws, without the risk of problems with installation or improper operation.
- Better cut quality - an even, smooth cut makes it easier to further process the wood, and when pruning trees, it reduces the area of injury, which is beneficial to their condition.
- Trust in the brand - Oleo-Mac is a renowned manufacturer of garden and forestry equipment, which means strict quality control and attention to design details.
Technical specifications of Oleo-Mac 1.3 mm cutting chain .325" 72 guide links 30629027C
| Brand / manufacturer | Oleo-Mac |
| Model / catalog code | 30629027C |
| Product type | Chainsaw cutting chain |
| Chain pitch | .325" |
| Guide link width | 1.3 mm |
| Number of guide links | 72 |
| Type of cutting tooth | Semi-chisel (semi-chisel) |
| Destination | Cutting wood, branches, logs, forestry and garden work |
| Compatible saws | Oleo-Mac GSH 51, 510, 56, 560 (and others with compatible bar parameters) |
| EAN | 8026619108960 |
FAQ - Frequently asked questions about Oleo-Mac 1.3 mm cutting chain .325" 72 cells 30629027C
1. Does this chain only fit Oleo-Mac chainsaws?
The chain was designed primarily for Oleo-Mac chainsaws (m.in. GSH 51, 510, 56, 560). It can also be used on other saws, as long as they have a guide bar with pitch .325", 1.3 mm groove width and require a 72-link guide chain. It's always a good idea to compare the parameters with the manual of your chainsaw.
2. How often should you sharpen your chain?
Sharpening frequency depends on the intensity and type of work. For typical home use, sharpening after several full tanks of fuel is usually sufficient. If you notice a decrease in cutting speed, increased vibration or fine dust instead of chips - this is a sign that the chain needs sharpening.
3. What is the difference between a half chisel tooth and a full chisel tooth?
The half chisel tooth has rounded cutting edges, making it more resistant to dirt (e.g. sand, soil in tree bark) and easier to sharpen. The full chisel tooth cuts more aggressively, but dulls faster and requires more precision when sharpening. Half chisel is an ideal compromise for most users.
4. How to check if the chain is properly tensioned?
Properly tensioned chain adheres to the bar, but it can be lifted slightly so that the ends of the guide links do not come completely out of the groove. A chain that is too loose can fall off the bar, and one that is too tight accelerates wear and stresses the chainsaw's bearings.
5. Does the chain need to be run-in after installation?
A new chain does not require special lapping, but it is recommended to run the first several minutes with a moderate load, regularly checking the chain tension. A new chain usually stretches slightly and needs re-tightening.
6. How to take care of a chain to make it last as long as possible?
Use the right oil for lubrication, avoid contact with the ground and stones, sharpen the teeth regularly with a file of the correct diameter, and check the tension. Store the chain in a dry place, preferably in its original packaging or in an oiled bag/eti.
7. Is it worth buying an original chain when there are cheaper replacements?
Genuine Oleo-Mac chain provides the best-matched link geometry for your specific chainsaw, higher durability and confidence in the quality of materials. In practice, this means less frequent chain changes, less wear and tear on the bar and motor, and greater operational safety - which often compensates for the higher purchase price.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.