OLEO-MAC 1.3 MM 3/8" 57 GUIDE LINK CUTTING CHAIN 30629018C
- Oleo-Mac 1.3 mm 3/8" 57 link cutting chain 30629018C - original chain for Oleo-Mac GS 371, GSH 40, GSH 400 chainsaws. High durability, half chisel teeth, fast and precise wood cutting.
OLEO-MAC 1.3 MM 3/8" 57 GUIDE LINK CUTTING CHAIN 30629018C is an original, high-quality chain for Oleo-Mac brand petrol chainsaws. It was designed specifically for users who want maximum cutting performance, long service life and safe operation - both in professional forestry operations and in home applications.
The cutting chain is one of the key components of the saw - it is responsible for the speed, precision and culture of the device. By choosing original Oleo-Mac chain with 3/8" pitch, 1.3 mm thickness and 57 guide links in length, you gain the assurance of a perfect fit with the guide bar and the entire cutting system, resulting in less wear and tear on the saw and a higher quality of cut.
- Length 57 guide links
- pitch: 3/8"
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
Cutting chain for Oleo-Mac chainsaws : GS 371; GSH 40,GSH 400
What is Oleo-Mac 1.3 mm 3/8" 57 guide link cutting chain 30629018C?
The presented model is professional cutting chain for petrol chainsaws, designed for intensive work in cutting firewood, construction timber and tree care. Thanks to the use of semi chisel type cutting teeth the chain combines high cutting aggressiveness with high resistance to dulling, which is especially important when working in variable terrain conditions.
Designation 3/8" determines pitch of the chain, which influences the cutting characteristics - in this case, it ensures rapid work progress while maintaining adequate guidance stability in the wood. Groove width 1.3 mm is a standard found on many multi-purpose and semi-professional saws, giving a very good compromise between the strength and lightness of the cutting set.
57 guide links is the length of chain matched to specific models of Oleo-Mac saws and bars. Adequate number of links guarantees correct tension, smooth guidance along the guide, and optimum operation of the lubrication system.
Where the Oleo-Mac 1.3 mm 3/8" 57 link cutting chain 30629018C is mounted?
The chain is designed to be mounted on the bar of a petrol chainsaw. It fits selected models of Oleo-Mac chainsaws, including:
- Oleo-Mac GS 371
- Oleo-Mac GSH 40
- Oleo-Mac GSH 400
Proper installation involves placing the chain on the sprocket and guide bar so that the the cutting teeth are directed in the correct cutting direction (usually forward on top of the guide). Then adjust the chain tension so that it it adheres to the bar but can be moved freely by hand with a gloved hand. Proper tension and lubrication have a huge impact on the life of both the chain and bar, as well as the entire chainsaw.
The chain can be successfully used as:
- factory equipment new chainsaw,
- replacement chain when replacing worn accessories,
- spare chain taken to work in the woods or on the allotment to quickly continue cutting if blunted.
Use of Oleo-Mac 1.3 mm 3/8" 57-link chain - from home gardening to professional forestry work
Thanks to its thoughtful design and the use of high-grade steel, oleo-Mac cutting chain 30629018C works well in a wide range of jobs:
- Cutting firewood - Quick sawing of logs into clearings, shortening of logs to the appropriate length, preparation of wood for the winter.
- Cleaning work in the garden and orchard - Removal of thick branches, pruning of volunteer trees, maintenance work on fruit trees.
- Construction and repairs - cutting beams, scantlings, structural planks and roof trusses.
- Forestry work and forest plots - Toppling and thinning of medium-diameter trees, preparation of sawn timber.
Semi-chisel teeth provide stable guidance in the wood and perform well in conditions where minor dirt may appear in the cut material (bark with sand, resin). The chain is therefore an ideal choice for those who do not always work in perfectly clean conditions, and who need an accessory with a high resistance to dulling.
Oleo-Mac cutting chain 30629018C - quality, durability and reliability for demanding users
By choosing original Oleo-Mac chain, you are investing in a product that has been proven and refined for safety and efficiency in operation. The manufacturer draws on years of experience in the chainsaw and forestry equipment segment, which translates into a number of important benefits for the user.
1. High quality steel and precision workmanship
The chain links and cutting teeth are made of high-grade steel, resistant to deformation and fatigue. A special heat-treatment process hardens the working surface, increasing abrasion resistance. In practice, this means less frequent chain sharpening and a longer period of trouble-free operation.
2. Half-chisel type cutting teeth - the optimum compromise between aggressiveness and durability
The shape of the half chisel is less sensitive to dirt than a full chisel, so the chain retains its sharpness better in garden and household work. At the same time, it maintains high cutting performance, making it also great for more intensive, professional applications.
3. User comfort and safety
A properly selected and sharpened Oleo-Mac chain minimizes the tendency of the saw to kickback, facilitates precise guidance along the cutting line and reduces operator fatigue. Less vibration means greater comfort, which is of great importance for longer cutting sessions.
The most important benefits of buying Oleo-Mac 1.3 mm 3/8" 57 link cutting chain 30629018C
- Perfect fit for Oleo-Mac GS 371, GSH 40 and GSH 400 chainsaws - guarantee of mechanical compatibility and safety.
- Long life - Abrasion resistance, solid rivets, stable operation even under heavy use.
- Precise and fast cutting - Optimum 3/8" pitch and semi-chisel teeth for efficient work in soft and hard woods.
- High comfort - Less vibration, less frequent need for sharpening, easier saw guidance.
- Security - Chain designed for reduced risk of kickback and stable behavior in the material.
These features make the Oleo-Mac 30629018C chain an excellent choice for homeowners and landowners alike, as well as for professionals in the forestry, construction or gardening industries. It's reliable, branded equipment, that allows you to get the most out of your chainsaw.
Technical specifications of Oleo-Mac 1.3 mm 3/8" 57 link cutting chain 30629018C
| Manufacturer | Oleo-Mac |
| Model / Code | 30629018C |
| Product type | Cutting chain for petrol chainsaw |
| Chain pitch | 3/8" |
| Groove width (thickness of the guide link) | 1.3 mm |
| Number of guide links | 57 |
| Type of cutting teeth | Half chisel |
| Application | Oleo-Mac GS 371, GSH 40, GSH 400 chainsaws |
| Practical application | Cutting firewood, construction timber, forestry and garden work |
| EAN code | 8026619109004 |
FAQ - Frequently asked questions about Oleo-Mac 1.3 mm 3/8" 57 link chain 30629018C
1. Will this chain fit my Oleo-Mac chainsaw?
The chain has been dedicated to models GS 371, GSH 40 and GSH 400. If you have a different model, check the saw manual for the required pitch, guide link thickness and number of links. If the parameters are 3/8", 1.3 mm and 57 links, the chain will also fit your bar.
2. How often should you sharpen your Oleo-Mac chain?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. For typical home use, it is recommended short sharpening after each day's work. Thanks to the half-chisel teeth, the chain maintains its sharpness longer, but contact with soil, sand or stones significantly accelerates blunting.
3. How to properly tension a chain?
After installing the chain, loosen the bar nuts, adjust the tensioner so that the the guide links fully enter the bar groove, at the same time, the chain could be moved by hand with a glove. Then tighten the nuts and recheck the tension after a few cuts - the new chain may stretch slightly.
4. What oil to lubricate the chain with?
For lubrication, use special chain oil for chainsaws. It is suitably viscous and suitable for high speed operation, which effectively protects the links and guide from overheating and accelerated wear.
5. When to replace the chain with a new one?
The chain is eligible for replacement when:
- the cutting teeth have become very short after repeated sharpening,
- cracks appear on links or rivets,
- the chain has stretched so much that it cannot be properly tightened,
- despite sharpening, the saw cuts very slowly and unevenly.
6. Will this chain work well for cutting hardwoods?
Yes, the Oleo-Mac chain with 3/8" pitch and half-chisel teeth copes very well with both soft wood (spruce, pine), as well as harder species (beech, oak). However, it is important to sharpen regularly and lubricate properly, especially when cutting hardwoods intensively.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.