OLEO-MAC 1.3 MM 3/8" 53 GUIDE LINKS CUTTING CHAIN 30629016C
- Genuine Oleo-Mac 1.3 mm 3/8" 53 link cutting chain 30629016C for GS 371, GSH 40, GSH 400 chainsaws. Professional half chisel teeth guarantee fast, precise and safe wood cutting. Ideal for household, garden and forestry work.
OLEO-MAC cutting chain 1.3 mm 3/8" 53 guide links 30629016C is an original, high-quality chain for petrol and electric chainsaws, designed for demanding home users, professional gardeners and municipal services. Thanks to its precision links, semi-cutting teeth and perfectly matched technical parameters, it guarantees fast, clean and safe wood cutting in all conditions.
What is the OLEO-MAC 30629016C cutting chain?
This is the working element of the saw responsible for the actual cutting of the wood. Made of hardened steel, consists of guide links, connecting links and cutting teeth. Model OLEO-MAC 1.3 mm 3/8" 53 guide links 30629016C has been precisely matched to the guides and drive system of Oleo-Mac saws, ensuring optimum performance and durability of the entire cutting kit.
Where the OLEO-MAC 1.3 mm 3/8" 53 guide link cutting chain is mounted?
The chain is mounted on the saw guide bar and drive wheel. This particular model is designed for Oleo-Mac chainsaws:
- GS 371
- GSH 40
- GSH 400
When properly installed on the bar and properly tensioned, the chain works with the chainsaw's lubrication system to ensure smooth operation, less wear and tear, and user safety.
Application of OLEO-MAC cutting chain 30629016C
The chain is designed for a wide range of work:
- household work - cutting firewood, trimming branches, preparing firewood,
- horticultural and orchard work - tree care, branch pruning, crown correction,
- forestry and utility work - removal of fallen trees, cleanup work after windstorms, cutting structural timber in the field.
Complete technical description (including product sheet data):
- Length: 53 guide links
- Pitch: 3/8"
- Chain groove width: 1.3 mm
- Cutting teeth: half chisel type
- Purpose: cutting chain for Oleo-Mac chainsaws: GS 371; GSH 40, 400
- Chain type: professional wood cutting chain
- Manufacturer/Brand: Oleo-Mac (EMAK)
- Catalog code: 30629016C
- EAN: 8026619109028
OLEO-MAC cutting chain 1.3 mm 3/8" 53 links - precise cutting and full control of the saw
1. Optimal 3/8" pitch - versatility and smooth operation
The 3/8" pitch is one of the most popular solutions in garden and semi-professional saws. It provides an excellent compromise between cutting speed and operating culture. With this, the chain:
- allows fast cutting of both thin branches and thicker logs,
- reduces saw vibration, resulting in less operator fatigue,
- provides better control of the cutting path - especially important for precision pruning of fruit trees and crown molding.
In everyday use, this means that you can easily trim trees on the plot, prepare firewood or handle cleanup after high winds without having to reach for several different chains.
2. Narrow 1.3 mm chain - less resistance, faster cutting
Groove width of 1.3 mm translates into narrower cutting gap. For the user, this means:
- less resistance as the chain sinks into the wood,
- lower fuel or electricity consumption,
- faster operation without "jerking" or dropping the speed of the saw.
In practice, you will feel it when cutting more wood - for example, preparing several cubic meters of firewood. The saw will be less stressed and you will get more work done in less time, saving fuel and reducing wear and tear on the machine itself.
3. 53 guide links - perfect fit for the guide bar
Chain length expressed in number of 53 leading links has been precisely matched to compatible Oleo-Mac saws and guides. With this:
- the chain can be quickly and securely installed without reworking or shortening,
- the correct geometry of the cutting set is maintained - the chain stably "sits" in the groove of the bar,
- there is a reduced risk of the chain falling off when the tension is correct.
This is especially important if you often work in the field - in the forest, orchard or on a vast property. Correct chain length increases safety, reduces downtime and minimizes the risk of costly damage to the bar or sprocket.
Durable half chisel teeth - high cutting performance with less effort
1. Half-chisel type cutting teeth - the ideal compromise between speed and sharpness
The chain is equipped with cutting teeth of a half-snapshot type, which combine the advantages of chisel and rounded teeth. This design makes:
- the chain handles both softer and harder wood very well,
- maintains sharpness for a longer period of time, even with occasional contact with soiled material,
- is easier to sharpen than a full chisel - all you need is a standard round file and guide.
During gardening and backyard work, we often cut wood with residual bark, sand or leftover soil. Semi-chisel teeth are more resistant to such conditions than aggressive full-chisel chains, which significantly extends the period between sharpenings.
2. Stable tooth geometry - clean and even cuts
Precisely shaped teeth ensure even loss of material during cutting. With this:
- the cutting surface is smooth and even - especially important in carpentry and in the preparation of construction material,
- the saw does not "pull" sideways, which increases the safety of work,
- it is easier to make accurate cuts to size when building gazebos, sheds, fences or other wooden structures.
3. Comfort of sharpening and service
The teeth of the half chisel are suitable for manual sharpening with a file. This means you don't have to visit a service center every time - with a little practice, you can restore full sharpness to the chain yourself. This is a real time and money saver, especially for those who regularly work with a chainsaw.
Original OLEO-MAC chain 30629016C - reliability and safety in all conditions
1. Original EMAK product - guarantee of quality and compatibility
Buying a genuine Oleo-Mac chain means you can be sure that all parameters - from length and pitch to tooth shape - have been matched to your chainsaw. With this:
- installation problems and incorrect tension are avoided,
- the risk of damage to the guide or drive wheels is reduced,
- the saw retains the factory performance and safety features provided by the manufacturer.
For the user, this means working with peace of mind both at home and on service assignments - without worrying about unexpected failures.
2. High durability of components - lower operating costs
The chain was made of high-quality steel, hardened by industrial processes. Durable rivets and links provide tensile and wear resistance, which translates into:
- longer life of a single chain,
- less frequent need to purchase new cutting elements,
- trouble-free operation even when the saw is used intensively.
If you frequently prepare firewood, do tree care or run a service business, the extended chain life will realistically reduce your equipment operating costs.
3. Work safety - stable chain guidance
A well-chosen and properly tensioned chain reduces the risk of kickback and falling off the bar. Combined with the saw's factory safety features, this translates into a high level of safety:
- less chance of sudden chain blockage,
- stable run on the guide bar even when cutting harder woods,
- safer operation for less experienced users.
Chain for Oleo-Mac GS 371, GSH 40, GSH 400 chainsaws - the sure choice for home, garden and outdoor work
1. Perfectly matched to specific saw models
Model 30629016C was designed primarily for chainsaws:
- Oleo-Mac GS 371,
- Oleo-Mac GSH 40,
- Oleo-Mac GSH 400.
This fit increases the reliability of the cutting set. You don't waste time selecting replacements and you don't risk the chain turning out to be too long or too short.
2. Wide range of applications - from home garden to service work
The chain will be great for many daily tasks:
- cutting firewood from logs and thick branches,
- crown formation and clearance of ornamental and fruit trees,
- removal of fallen trees after windstorms or heavy snowfall,
- work on the construction of wooden structures - gazebos, shelters, tool houses.
3. Comfort of use for amateurs and professionals
Oleo-Mac 1.3 mm 3/8" 53-link chain provides convenience for both occasional and professional users of chainsaws. Easy operation, high cutting performance and predictable working behavior make it a sure choice for anyone who expects reliability and safety.
FAQ - Frequently asked questions about OLEO-MAC 1.3 mm 3/8" 53 link chain 30629016C
1. For which chainsaws this chain fits?
The chain was designed for Oleo-Mac chainsaws: GS 371, GSH 40 and GSH 400. It may also fit other models with identical pitch, groove width and number of links - in which case it is always a good idea to compare the parameters with the saw's manual.
2. How to check if the chain will be suitable for my chainsaw?
Three main parameters should be noted: pitch (3/8"),guide groove width (1.3 mm) and number of guide cells (53). This information is usually found on the guide bar or in the saw's manual.
3. How often do you need to sharpen this chain?
The frequency of sharpening depends on the intensity of use and the type of wood being cut. For typical backyard work, sharpening every few full days of operation is usually sufficient. When you notice a decrease in cutting speed or fine dust instead of chips - this is a sign that the chain needs sharpening.
4. Can I sharpen the chain myself?
Yes. The half chisel type teeth are suitable for manual sharpening with a round file of the appropriate diameter. Using a guide will make it easier to maintain the correct sharpening angle. If you're inexperienced, it's a good idea to have a service technician do your first sharpening and ask for guidance.
5. How to properly tension a chain?
Properly tensioned chain should adhere to the guide bar, but allow itself to be pulled back a few millimeters so that the ends of the guide links do not come completely out of the groove. After each installation or replacement of the chain, it should be tightened after a short test run, as the new chain tends to elongate slightly.
6. Is this chain suitable for cutting very hard woods?
The chain is designed to work in both softer and harder woods. However, when intensively cutting extremely hard species (e.g., oak, hornbeam), it is necessary to check the sharpness of the teeth more often and ensure proper lubrication and cooling through the right amount of chain oil.
7. Is this an original Oleo-Mac product?
Yes, model 30629016C is an original Oleo-Mac/EMAK chain, marked with the correct catalog code and EAN number, which guarantees full compatibility and high quality workmanship.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.