OLEO-MAC 1.3 MM 3/8" CUTTING CHAIN 52 GUIDE LINKS 30629015C
- Original Oleo-Mac 1.3 mm 3/8" 52-link cutting chain (30629015C) for GST 360 chainsaw. Durable half chisel chain for professionals and demanding users - precise, safe wood cutting.
Oleo-Mac 1.3 mm 3/8" 52 guide link cutting chain 30629015C - professional precision cutting for GST 360 chainsaw
Oleo-Mac 1.3 mm 3/8" 52 guide links cutting chain 30629015C is an original, high-quality chain for petrol chainsaws, designed specifically for Oleo-Mac GST 360 model. The use of 3/8" pitch, 1.3 mm groove width and 52 guide links guarantees a perfect fit with the guide and drive unit, which translates into maximum performance, safety and comfort in the hands of both professionals and demanding home users.
- Length 52 guide links
- pitch: 3/8"
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
What is Oleo-Mac 1.3 mm 3/8" 52 guide link cutting chain 30629015C?
Oleo-Mac 1.3 mm 3/8" 52 guide links 30629015C cutting chain is a key working component of a petrol chainsaw, responsible for efficient and precise cutting of wood. It is an original product of a reputable manufacturer, made of high-quality, hardened steel with increased resistance to abrasion and stretching. The semi-shear type cutting teeth combine high cutting aggressiveness with good resistance to dulling, making the chain suitable for both dry and lightly soiled timber.
Thanks to careful manufacturing, precise riveting and optimal link spacing, the chain ensures smooth operation, reduces saw vibration and improves operator comfort and safety. It's a solution dedicated to those who expect consistent, repeatable cutting quality from their equipment while reducing operating costs.
Where the Oleo-Mac 1.3 mm 3/8" 52 guide link chain 30629015C is mounted?
Cutting chain 30629015C installs on the bar of Oleo-Mac GST 360 petrol chainsaw. The chain design is fully compatible with the factory parameters of this saw - both in terms of length (52 guide links), groove width (1.3 mm) and 3/8" pitch. Proper matching of these parameters is crucial for the safety and life of the entire cutting system.
Installation involves the standard installation of the chain on the sprocket and guide bar, and then setting the correct tension. Thanks to the precise design of the drive links, the chain runs stably in the groove of the bar, minimizing the risk of jumping out during operation. The use of genuine Oleo-Mac chain eliminates problems common to cheaper substitutes, such as too loose a fit with the bar or rapid chain elongation.
In practice, this means that the chain is ideal for:
- oleo-Mac GST 360 chainsaw used in the care of trees, orchards and gardens,
- work on an aerial lift or in the treetops by arborists,
- service applications - as replacement chain for periodic maintenance of GST 360 saws.
Application of Oleo-Mac 1.3 mm 3/8" 52-link chain - precision in the garden, orchard and forest
Oleo-Mac 30629015C cutting chain is designed for a wide range of woodworking applications. Thanks to the specific geometry of the half-slit teeth, it provides a very good balance between cutting speed and surface quality after cutting. Such a solution is especially appreciated by those who need precise and clean cuts in hard-to-reach places.
Examples of applications in daily work:
- Care of trees in the garden and on the property - shortening of branches, removal of dry branches, crown shaping of ornamental and fruit trees.
- Work in orchards and tree nurseries - fast, repeatable cuts for tree clearance, cutting out diseased branches, preparing wood material for chipping.
- Preparation of firewood - cutting of thin and medium branches into firewood sections, cleaning up the area after felling.
- Professional forestry and arborist services - Working at height, removing dangerous branches over power lines or buildings, where a lightweight saw and reliable chain are important.
The chain handles both soft coniferous wood (spruce, pine) and harder hardwoods (oak, beech, hornbeam) well, provided it is properly sharpened and lubricated. This makes it a versatile tool for the user who needs one proven solution for most work around the house and in the field.
Oleo-Mac GST 360 1.3 mm 3/8" cutting chain - quality, durability and convenience of use
Genuine Oleo-Mac GST 360 1.3 mm 3/8" 52 guide links cutting chain is designed to maximize the life of the saw's cutting system while maintaining high speed and smoothness of cut. The manufacturer uses high-grade steel with controlled hardness, and the process of hardening and grinding the teeth ensures that the chain stays sharp longer, which directly translates into less effort when working.
Key user benefits:
- High durability and wear resistance - Hardened links and half-hollow teeth designed to work in variable conditions (dry, wet, fine dirt in the wood).
- Comfort and safety - Reduced tendency to bounce (kickback) and smooth operation on the slide reduce operator fatigue and the risk of accidents.
- Lower operating costs - longer sharpness retention and limited chain elongation means less frequent sharpening and less frequent replacements, saving time and money.
- Consistent, high quality cutting - Ideal for work requiring precision, such as in arboriculture, ornamental tree care, facade and roof work.
For example, when regularly tending a garden of several acres with fruit and coniferous trees, a properly operated Oleo-Mac 30629015C chain can serve for an entire season, providing repeatable quality and speed of cutting, without the need for frequent replacement or intensive servicing.
Key technical features of Oleo-Mac 1.3 mm 3/8" 52 guide links chain 30629015C
To make it easier to choose the right chain for your chainsaw and bar, the most important product specifications have been collected below:
- Manufacturer: Oleo-Mac
- Purpose: oleo-Mac GST 360 petrol chainsaw
- Chain pitch: 3/8"
- Chain groove width: 1.3 mm
- Number of guide cells: 52
- Type of cutting teeth: half-chisel (semi-chisel)
- Type of chain: wood cutting chain
- Catalog/System Code: 30629015C
- EAN code: 8026619109073
With these parameters, you can accurately verify whether the chain will fit your bar and sprocket. This is extremely important, especially if you have several guides of different lengths or use saws in a larger service company where full compatibility of spare parts is important.
Why choose the original Oleo-Mac 30629015C cutting chain?
By opting for the original Oleo-Mac 1.3 mm 3/8" 52 guide link cutting chain 30629015C, you are investing in the safety and reliability of your tool. The use of dedicated spare parts is especially important for lightweight chainsaws for work at height, such as the GST 360, where any uncontrolled movement or failure can have serious consequences.
The original chain provides:
- Full compatibility with the saw - No fitting problems, proper lubrication and cooperation with the guide.
- Optimum performance - Chain speed, depth and shape of cut adapted to the engine characteristics of the GST 360 chainsaw.
- Hassle-free installation - Intuitive chain insertion, even tensioning and stable running in the bar groove.
- Quality guarantee - product from official distribution, packed in the original box, which reduces the risk of buying a counterfeit.
If you manage a landscaping, logging, or arborist service company on a daily basis, choosing genuine Oleo-Mac chains will allow you to maintain a consistent level of service quality, reduce equipment downtime, and provide your operators with a high level of comfort and work safety.
How to extend the life of Oleo-Mac 1.3 mm 3/8" 52-link chain?
To realize the full potential of the 30629015C cutting chain, it is worth following a few simple operating rules:
- Proper lubrication - use high quality chain oil and check the oil level in the chain saw tank; a dry chain heats up and wears out faster.
- Proper tension - the chain should not hang from the bar, but must be able to be moved freely with a gloved hand; too much tension accelerates wear and tear.
- Regular sharpening - Sharpen the cutting teeth according to the recommended angle, using files and sharpening tools; a dull chain increases engine load and fuel consumption.
- Avoiding contaminated wood - Sand, soil or stones in the roots and trunks greatly accelerate the blunting of teeth.
Following these rules will allow you to significantly extend the life of your chain, while maintaining a high level of cutting comfort and operational safety.
FAQ - Frequently asked questions about Oleo-Mac 1.3 mm 3/8" 52 guide link chain 30629015C
Question 1: Does this chain fit other chainsaws than the Oleo-Mac GST 360?
The chain was designed primarily for the Oleo-Mac GST 360 chainsaw. It can also fit other models and brands if they use the same combination of parameters: 3/8" pitch, 1.3 mm groove width and 52 guide links. However, you should always check the specifications of your guide bar and saw before you buy it.
Question 2: How to recognize that the chain needs sharpening?
Sharpening is evidenced by m.in.: increased cutting effort, fine dusty chips instead of long chips, tendency for the saw to "jump" on the wood, and a marked decrease in operating speed. In such a situation, sharpen the chain according to the manufacturer's recommendations or have it done by a service center.
Question 3: Is the half chisel type chain suitable for dirty wood?
Half chisel teeth are more resistant to dulling than full chisel, so they withstand contact with lightly soiled wood better than aggressive "full chisel" chains. However, it is still recommended to avoid cutting wood with sand or stones, so as not to unnecessarily shorten the life of the chain.
Question 4: How often should you replace the chain with a new one?
Frequency of replacement depends on the intensity of work and use. The chain needs to be replaced when, despite proper sharpening, the teeth are already too short, the chain has excessively elongated or visible damage has appeared (cracks, chipping, bent links). In amateur applications, one-two chains per season are often sufficient, in professional applications - even several sets per month.
Question 5: Is the chain supplied in its original packaging?
Yes, the Oleo-Mac 1.3mm 3/8" 52 guide link cutting chain 30629015C comes in the original manufacturer's branded box for easy storage and to protect the chain from damage and dirt in transit.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.