OLEO-MAC 1.3 MM 3/8" CUTTING CHAIN 40 GUIDE LINKS 30629012C
- Genuine Oleo-Mac 1.3 mm 3/8" 40-link cutting chain (30629012C) for PPH 250, PH 30, GSTH 240 saws and trimmers. Durable, half chisel, ideal for wood cutting and tree care.
Cutting chain Oleo-Mac 1.3 mm 3/8" 40 guide links 30629012C is an original, high-quality chain designed for professional and household applications. Designed by Oleo-Mac brand experts, it provides precise, fast and clean wood cutting with maximum user safety. Ideal for limbing, pruning branches, orchard maintenance and light forestry work.
Thanks to the appropriately selected pitch of the chain 3/8" (low profile), small groove width 1.3 mm and length 40 guide links, this model guarantees very good performance while reducing the load on the saw and the user. Cutting teeth of the type half chisel make sharpening easier and are great in the hands of both professionals and demanding amateurs.
- Length 40 guide links
- pitch: .3/8"
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
Cutting chain for Oleo-Mac chainsaws and trimmers : PPH 250; PH 30; GSTH 240
Oleo-Mac 30629012C cutting chain - what it is and why you should choose it?
OLEO-MAC 1.3 MM 3/8" CUTTING CHAIN 40 GUIDE LINKS 30629012C is a factory-made premium cutting chain designed specifically for Oleo-Mac saws and trimmers. It is made of hardened steel with high wear resistance, which significantly extends its life and allows it to remain sharp for a long time, even under heavy use.
Teeth type half chisel (semi-chisel) combine very good cutting aggressiveness with forgiveness of minor operator errors and greater resistance to dirt (sand, bark residue). This makes the chain an ideal choice for both professional chainsaw makers and home users who want high comfort and easy operation.
Examples of daily applications:
- regular pruning of trees and shrubs in the garden or orchard,
- limbing branches after tree felling,
- cutting firewood for domestic use,
- maintenance of urban greenery and recreational areas.
Where the Oleo-Mac 1.3 mm 3/8" 40-link cutting chain 30629012C is mounted?
The chain is designed primarily for installation on original Oleo-Mac brand saws and trimmers. Fits m.in. for models:
- Oleo-Mac PPH 250
- Oleo-Mac PH 30
- Oleo-Mac GSTH 240
It mounts directly on the guide bar of a saw or limbing machine, matched to a 3/8" pitch (low profile) i groove width 1.3 mm. The length of the chain was determined by the number of 40 guide links, which guarantees a perfect fit with the dedicated guide.
In practice, this means that a user with the above-mentioned machine models can use this chain as:
- original first equipment,
- replacement chain when the previous one wears out,
- additional working set - for example, separately for cutting clean, dry wood and separately for work in dirty areas.
Such a solution significantly increases the comfort of the work - just reload the chain, instead of interrupting the order due to blunted teeth.
Use of Oleo-Mac chain 30629012C in the garden, orchard and forest
Thanks to its geometry and dimensions, the chain Oleo-Mac 1.3 mm 3/8" 40 links great for a wide range of tree care and woodworking applications. It is ideal for:
- Crown trimmings - The lightweight pruning machine with this chain makes it possible to quickly remove branches at height to facilitate maintenance and shaping cuts.
- Pruning branches and boughs - clean cutting reduces the risk of damage to the tree and speeds up healing of cutting wounds.
- Preparation of firewood - The chain performs well in cutting logs, boughs and smaller softwood and hardwood stumps.
- Cleanup work after windstorms - efficient cutting of broken branches and trees on the plot, in the orchard or in the forest.
For the end user, this means more efficient work, less fatigue, and a reduction in the time required for each cutting operation. The chain holds direction, cuts evenly and reduces vibration, so the saw handles steadily even when working overhead.
The most important features and advantages of Oleo-Mac 1.3 mm 3/8" 40-link cutting chain
Deciding on an original chain Oleo-Mac 30629012C, you gain a number of practical benefits that directly translate into convenience and safety at work:
- High precision cutting - Half chisel type tines provide a clean, smooth cut, ideal when caring for fruit trees or ornamental trees in the garden.
- Reduced propensity to bounce (kickback) - The right shape of the links and stops makes the saw behave predictably even on more difficult cuts.
- Longer life - Solid steel and high-quality riveting cause the chain to wear more slowly, reducing replacement frequency and operating costs.
- Ease of sharpening - the half chisel profile is noticeably easier to resharpen than a full chisel, which is important especially for users who maintain the equipment themselves.
- Optimum width 1.3 mm - thinner cutting line means less drag, less engine power consumption and lower fuel or electricity consumption.
Thanks to these features, the chain will be perfect for both the arborist's daily work and the homeowner or allotment owner who wants to always have perfectly trimmed trees and a supply of firewood.
Oleo-Mac cutting chain 30629012C - technical data
The following summarizes the most important technical parameters of the product from the point of view of machine fit and comfort:
| Manufacturer/brand | Oleo-Mac |
| Model/code | 30629012C |
| Chain pitch | 3/8" low profile (.3/8") |
| Chain groove width | 1.3 mm |
| Number of guide links | 40 |
| Type of cutting teeth | half-chisel (semi-chisel) |
| Destination | oleo-Mac PPH 250, PH 30, GSTH 240 chainsaws and trimmers |
| EAN | 8026619109080 |
Oleo-Mac chain safety, maintenance and comfort
Properly selected and maintained cutting chain is the basis for safe operation of any chainsaw. Model Oleo-Mac 30629012C has been designed for handling stability and to reduce dangerous bounces. Properly shaped links and cutting depth stops allow better control of cutting speed.
Examples of good usage practices:
- always check chain tension before starting work - too loose can slip off the bar, and too tight increases wear and risk of overheating,
- sharpen the teeth regularly, using files with a diameter recommended for the 3/8" pitch,
- take care of proper lubrication - running out of chain oil significantly reduces the life of the chain,
- use the chainsaw only with complete guards and protective equipment (anti-cutting gloves, goggles, helmet, protective pants).
Following these rules will ensure that your Oleo-Mac cutting chain will last a long time, while providing high comfort and safety in all conditions.
FAQ - Frequently asked questions about Oleo-Mac 1.3 mm 3/8" 40 link cutting chain 30629012C
1. For which models of saws and trimmers this chain fits?
The chain was designed for Oleo-Mac machines: PPH 250,PH 30 and GSTH 240. It can also fit other machines with 3/8" low profile pitch, 1.3 mm groove width and 40 guide link chain length - it is advisable to compare the parameters with the instructions of your machine before purchasing.
2. How to check whether the number of links 40 will be appropriate?
The easiest way is to count the guide links in the old chain or read this information from the guide bar (usually the pitch number, width and number of links are stamped there). If your guide requires a chain with 40 guide links, this model will be suitable.
3. Is the half chisel chain suitable for working in dirty wood?
Yes, the profile half chisel is more resistant to dulling than a full chisel when exposed to sand, soil or bark residue. However, it is still a good idea to avoid deliberately cutting dirty wood to maximize the life of the chain.
4. How often should you sharpen your chain?
Sharpening frequency depends on the intensity and type of work. For standard home use, it is recommended gentle sharpening after each refueling of the saw. In professional use, more frequent sharpening may be necessary, especially when cutting harder woods.
5. Is this chain suitable for cutting firewood?
Yes. It is a very good choice for preparing firewood - From both trunks and thick branches. The 3/8" low profile pitch and 1.3 mm width ensure efficient cutting with less load on the saw, allowing you to prepare the needed wood supply faster.
6. Can I replace the chain myself?
Yes, replacing the chain is a maintenance activity provided by the manufacturer. Follow the instruction manual of the saw or limbing machine - it is important to tension the chain correctly and to install it in the right direction. If you're inexperienced, it's a good idea to ask your service or dealer for help.
7. Is a special oil needed for this chain?
No, however, it is recommended to use dedicated chainsaw chain lubricant oils, preferably with the right viscosity for the prevailing temperature conditions. This provides effective protection against overheating and prolongs the life of both the chain and the bar.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.