OLEO-MAC 1.3 MM CUTTING CHAIN .325" 72 GUIDE LINKS 30629006C
- Original Oleo-Mac 1.3 mm cutting chain .325" 72 links 30629006C - professional chain for GSH and GS chainsaws. Ideal for wood cutting, forestry work and firewood preparation.
OLEO-MAC 1.3 MM CUTTING CHAIN .325" 72 GUIDE LINKS 30629006C - PROFESSIONAL PRECISION CUTTING FOR OLEO-MAC SAWS
Oleo-Mac 1.3 mm cutting chain .325" 72 guide links 30629006C is an original, high quality working chain designed for Oleo-Mac petrol chainsaws. Designed for professional users and demanding amateurs, it provides fast, clean and stable wood cutting with a high level of safety. Thanks to the precise geometry of the semi-cut teeth and the optimized pitch .325" chain is ideal for work in the woods, orchard, garden and when preparing firewood.
What is Oleo-Mac 1.3 mm cutting chain .325" 72 guide links 30629006C?
The Oleo-Mac 30629006C cutting chain is the key working component of a petrol chainsaw responsible for actually cutting the wood. Consists of precision-manufactured guide links, cutting teeth and connecting links. This model uses:
- Length: 72 guide links - Guarantee of a perfect fit with the corresponding Oleo-Mac guides.
- Pitch: .325" - universal, very popular standard that allows for fast and aggressive, yet stable cutting.
- Chain groove width: 1.3 mm - Narrow kerf reduces cutting resistance, resulting in less strain on the saw engine.
- Semi-chisel type cutting teeth - Optimum compromise between cutting speed and durability and ease of sharpening.
The chain is made of hardened steel with improved abrasion and tensile resistance, which allows for long-term intensive use with a high level of safety and stable cutting quality.
Where the Oleo-Mac 30629006C cutting chain is installed?
Oleo-Mac 1.3 mm cutting chain .325" 72 guide links 30629006C is mounted on the guide bar of a petrol chainsaw, putting it on the drive sprocket (clutch drum) and guiding it in the groove of the guide bar. This is an original chain dedicated to selected models of Oleo-Mac chainsaws, which guarantees:
- perfect fit for the guide and pinion,
- stable chain running even under heavy load,
- reduced risk of falling or wedging.
This model fits Oleo-Mac chainsaws:GSH 51, GSH 510, GSH 56, GSH 561, GS 451, GS 630, GS 650, GS 651. If your saw is one of the above models, by choosing the chain 30629006C you are assured of full compatibility and maintenance of the parameters provided by the manufacturer.
Application of Oleo-Mac 1.3 mm cutting chain .325" 72 guide links
Oleo-Mac 30629006C cutting chain is designed for a wide range of woodworking jobs. It will be perfect for both hobby and professional work:
- Forestry and logging work - Felling and limbing of trees, preparation of timber in stockpiles, cutting of trunks into sections.
- Fuel preparation - Cutting logs, logs and thick boughs into billets, work on home firewood production.
- Garden and orchard work - Tree care in orchards, cutting back old plantings, removing thick branches after windstorms.
- Construction and utility work - cutting of structural beams, pallets, logs and other wooden elements used on farms and construction sites.
Thanks to the use of half-hole teeth, the chain maintains good performance even in less ideal conditions (e.g., light bark dirt, occasional contact with the ground), while being easier to sharpen than aggressive full-hole teeth.
Oleo-Mac 1.3 mm cutting chain .325" 72 cells 30629006C - construction, quality and technology
Original Oleo-Mac chain is made using modern metal processing technologies and multi-stage hardening. Each cutting tooth has a well-defined angle of attack, which translates into:
- high precision cutting - The chain bites into the wood smoothly, with no jerking or tendency to "wander" along the cut,
- less operator effort - The saw does not require excessive pressure, which is important for prolonged work,
- reduced fuel consumption - Lower cutting resistance means saving time and fuel in the long run.
Hardened guide link elements and rivets increase the chain's resistance to tension and deformation, which keeps the correct tension longer and minimizes the need for adjustments during operation.
User benefits - convenience, safety and durability
When you choose the Oleo-Mac 30629006C cutting chain, you are investing in a tool that makes a real difference in comfort and safety:
- High durability of the cutting edge - You sharpen the chain less often, saving time and money, and the saw remains ready to work whenever you need it.
- Stable guidance in the cut - reduces the risk of jamming and "kicking" the saw, which will be appreciated by less experienced users.
- Ability for intensive use - the ideal choice for forestry companies, municipal utilities, farms and private users making regular fuel cuts.
For example, when preparing firewood at the weekend, the chain will allow you to quickly cut large quantities of logs without a drastic drop in productivity. In the forest, on the other hand, it will make it easier to limb and cut through trunks of varying diameters, and in the orchard it will enable the efficient removal of thick, old branches.
Original Oleo-Mac chain 30629006C - why you should choose a branded product?
Original Oleo-Mac accessories, such as the 30629006C chain, are designed in parallel with the brand's chainsaws. This allows the manufacturer to perfectly align:
- motor performance with cutting resistance,
- bar, sprocket and chain parameters,
- chain lubrication and guidance system.
Unlike many substitutes, the original Oleo-Mac chain provides greater quality repeatability, better operating culture (less vibration, noise, jerking) and full compliance with the manufacturer's safety recommendations. For the user, this means:
- longer life of the entire saw,
- lower risk of failures resulting from mismatched accessories,
- confidence that the machine is working as designed.
Technical specifications of Oleo-Mac 1.3 mm cutting chain .325" 72 links
- Brand: Oleo-Mac
- Model/code: 30629006C
- Product type: cutting chain for petrol chainsaws
- Chain length: 72 guide links
- Chain pitch: .325"
- Groove width (thickness of the guide link): 1.3 mm
- Type of cutting teeth: half chisel
- Purpose: oleo-Mac GSH 51, GSH 510, GSH 56, GSH 561, GS 451, GS 630, GS 650, GS 651 chainsaws
- EAN: 8026619108984
Practical examples of the use of Oleo-Mac chain in everyday work
Thanks to the combination of a narrow cut (1.3 mm) and pitch .the 325" Oleo-Mac 30629006C chain is extremely versatile:
- Home and Garden: cutting firewood, cleaning up the plot from thick shrubs and volunteer trees, removing broken branches after strong winds.
- Forestry: felling of medium-thick trees, limbing, cutting to length for transport; ideal for subcontractors and maintenance crews.
- Agriculture and farms: work in the felling of mid-field trees, preparation of beams and logs for farm buildings, cutting pallets and other wooden elements.
In either scenario, the chain ensures rapid work progress, reducing operator fatigue and downtime spent sharpening or adjusting.
FAQ - Frequently asked questions about Oleo-Mac 30629006C cutting chain
Question 1: For which chainsaws the Oleo-Mac 1.3 mm chain fits .325" 72 cells 30629006C?
The chain is designed for Oleo-Mac chainsaws: GSH 51, GSH 510, GSH 56, GSH 561, GS 451, GS 630, GS 650, GS 651. It is always a good idea to additionally compare the parameters given in the instructions of the saw (pitch, number of links, groove width) with the data of the chain.
Question 2: How often should this chain be sharpened?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. When used properly and avoiding contact with the ground, most users sharpen the chain after 2-3 full tanks of fuel. The half chisel type teeth are easy to sharpen and retain their sharpness well, so even frequent use is not troublesome.
Question 3: Will this chain perform well in harder hardwoods?
Yes, the Oleo-Mac 30629006C chain handles both softwood and harder hardwood (e.g. oak, beech, hornbeam) very well. It is important to maintain proper tooth sharpness and correct chain tension to ensure fast and clean cutting even in demanding material.
Question 4: How to choose the right chain tension?
A properly tensioned chain should fit tightly against the bar, but be able to be pulled back slightly with your fingers so that the lower links do not jump out of the groove. Check tension after each chain replacement and during the first few minutes of operation, as the new chain tends to elongate slightly.
Question 5: Can this chain be used with a bar other than the original bar?
You can, provided that the guide has pitch .325",groove width 1.3 mm and is provided for 72 leading links. However, for complete safety and reliability, it is recommended to use original Oleo-Mac guide bars matched to the particular model of the chainsaw.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.