OLEO-MAC 1.3 MM CUTTING CHAIN .325" 66 GUIDE LINKS 30629004C
- Original Oleo-Mac 1.3 mm cutting chain .325" 66 links (30629004C) for GSH 51/510/56/561 and GS 451/630/650/651 saws. High durability, half chisel teeth, clean and fast wood cutting. Ideal for home and professional work.
OLEO-MAC 1.3 MM CUTTING CHAIN .325" 66 GUIDE LINKS 30629004C - PROFESSIONAL CUTTING PERFORMANCE FOR OLEO-MAC CHAINSAWS
OLEO-MAC 1.3 MM CUTTING CHAIN .325" 66 PROVIDING BRANCH 30629004C is an original, high-performance cutting chain designed for Oleo-Mac petrol chainsaws. It provides precise, fast and exceptionally clean cutting of wood, and thanks to the optimized geometry of the cutting teeth, it guarantees the comfort of work for both professional users and demanding home do-it-yourselfers.
Chain is designed for maximum performance and durability in harsh forestry, gardening and construction conditions. Precise manufacturing and perfect fit to dedicated Oleo-Mac chainsaw models translate into less vibration, higher comfort and operator safety.
What is the OLEO-MAC 1.3 mm cutting chain .325" 66 guide links 30629004C?
OLEO-MAC 1.3 mm cutting chain .325" 66 guide links 30629004C is the working element of the saw, directly responsible for the process of cutting wood. It consists of guide links, semi-cutting teeth of the semi-cutting type, and connecting links, which work precisely with the guide and drive train of the chainsaw. It is the quality and design of the chain that most influences the speed of work, the smoothness of the cutting surface, and the fuel consumption and load on the engine.
Presented model is a factory original Oleo-Mac/Emak chain, specially designed for compatibility with selected chainsaws of this brand. The use of semi-chisel technology provides an excellent compromise between cutting speed, cutting edge durability and ease of sharpening.
Where the OLEO-MAC 1.3 mm cutting chain is mounted .325" 66 guide links 30629004C?
The cutting chain is mounted on the guide bar of a petrol chainsaw. This is the operating part that works with the drive wheel on the clutch drum. Proper installation and chain tension are critical to user safety and efficient operation of the equipment.
The presented model of chain is designed in particular for Oleo-Mac chainsaws:
- GSH 51
- GSH 510
- GSH 56
- GSH 561
- GS 451
- GS 630
- GS 650
- GS 651
The chain is put on the bar with the appropriate length and groove width (1.3 mm), then tensioned according to the instructions of the manufacturer of the chainsaw. The use of a genuine chain perfectly matched to the guide bar and clutch minimizes the risk of slipping off the sprocket and reduces wear on the components.
Application of OLEO-MAC 1.3 mm cutting chain .325" 66 guide links 30629004C
This chain is designed for versatile wood cutting work in the household, orchard, forest and construction site. It is ideal for household chores, firewood preparation, tree care and professional forestry and gardening applications.
Examples of applications in daily work:
- cutting firewood into blocks and billets, including from harder woods,
- preparation of wooden material for the construction of sheds, gazebos, fences and frame structures,
- care of trees in orchards and gardens - removal of thick branches, cutting dry and diseased branches,
- cleanup work after windstorms and storms - removal of fallen trees and branches,
- forestry work - limbing, thinning, cutting timber for depots.
Thanks to its half chisel type teeth, the chain also performs very well in less ideal conditions - with wood soiled with sand, bark, soil residue or moss. It is slower to dull and easier to sharpen than full chisel teeth.
Technical highlights of the OLEO-MAC 30629004C cutting chain
- Length: 66 guide links
- Pitch: .325"
- Chain groove width: 1.3 mm
- Type of cutting teeth: semi-chisel (semi-chisel)
- Intended use: original cutting chain for Oleo-Mac chainsaws (Models: GSH 51, 510, 56, 561; GS 451, 630, 650, 651)
- Manufacturer: Oleo-Mac / Emak
- Product code / symbol: 30629004C
- EAN code: 8026619109011
- Length 66 guide links
- pitch: .325"
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
Cutting chain for Oleo-Mac chainsaws : GSH 51, 510, 56, 561; GS 451,630, 650, 651
OLEO-MAC 1.3 mm cutting chain .325" 66 cells 30629004C - quality and durability for demanding users
One of the key advantages of the presented chain is its high durability. The use of high-grade steel and precision hardening of the links means that the chain stays sharp for a long time, and the risk of stretching and cracking is minimized. This allows the user to work longer on a single sharpening, saving time and service costs.
In practice, this means that during intensive work - such as seasonal cutting of several cubic meters of firewood - there is no need to frequently remove the chain for regeneration. The user gains smooth operation and the saw maintains consistent cutting performance.
In addition, the meticulous finish of the links and heavy-duty rivets enhance the safety of use. The chain is held firmly on the bar, and the risk of chain breakage during operation is reduced to a minimum when used correctly.
Work comfort and cutting performance - why choose this Oleo-Mac chain model?
Pitch chain .325" and a groove width of 1.3 mm is one of the universal solutions used in saws of medium power. As a result, it provides a very good balance between cutting aggressiveness and the level of vibrations generated. The half chisel type teeth are less prone to chipping when dealing with dirty wood, while offering fast cutting speed.
For the user, this means less hand and wrist fatigue during prolonged work, as well as greater control of the tool when making precision cuts - such as when cutting structural components or when performing maintenance work at height.
In everyday use, this chain will be appreciated by both professional chainsaw makers and those who use their chainsaw occasionally - for example, for seasonal wood preparation or orchard cleanup. Lower cutting resistance has a positive effect on the life of the chainsaw engine, as well as on fuel consumption.
Genuine OLEO-MAC chain 30629004C - safety and security of fit
The choice of the original Oleo-Mac 30629004C chain is a guarantee of full compatibility with the listed chainsaw models and compliance with strict safety standards. The manufacturer designs its accessories to work perfectly with the chainsaw's lubrication system, guide bar and clutch.
Thus, the user gains:
- assurance of proper tension and chain guidance during operation,
- optimal use of the lubrication system - oil evenly reaches the links, reducing friction and heating,
- lower risk of chain jamming in the material being cut,
- no problems with matching the length or width to the guide you have.
Original Oleo-Mac product is also covered by full manufacturer's support and service network - you will easily get help in choosing compatible accessories or spare parts if needed.
Practical benefits for the user - why this chain pays off?
Invest in a high-quality OLEO-MAC 1.3 mm cutting chain .325" 66 guide links 30629004C pays for itself quickly. With slower tooth dulling, less vibration, and lower fuel consumption, the cost of running the saw is lower in real terms. The user gains not only productivity, but also greater comfort and safety while working.
Using an original chain also means taking care of the saw itself - a properly fitted working element does not overload the engine or clutch, which has a positive effect on the life of the entire machine. This is especially important for professionals, for whom tool reliability means continuity of work and no downtime.
FAQ - Frequently asked questions about OLEO-MAC 1.3 mm cutting chain .325" 66 links 30629004C
1. For which chainsaws this chain fits?
The chain is designed for Oleo-Mac chainsaws: GSH 51, GSH 510, GSH 56, GSH 561 and GS 451, GS 630, GS 650, GS 651. It can be used wherever the manufacturer recommends a pitch chain .325", with a groove width of 1.3 mm and a length of 66 guide links.
2. How to check if the chain will fit my guide bar?
Three parameters should be verified: chain pitch (.325"), the width of the guide groove (1.3 mm) and the number of guide links (66). This information is usually found on the bar itself and in the saw's manual. If all the values match, the string will be appropriate.
3. What is the difference between half chisel and full chisel teeth?
The half chisel teeth have a gently rounded shape, making them more resistant to dulling when working in dirty wood. They sharpen more easily and are less likely to chip compared to the teeth of a full chisel, while still providing high cutting performance.
4. How often should this chain be sharpened?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. For typical home use, a slight sharpening is recommended after each day's work or after a noticeable drop in cutting performance. Regular, gentle sharpening is much more beneficial than waiting until the teeth are completely dulled.
5. How to care for the chain to extend its life?
It is important to maintain proper chain tension, use the right oil for lubrication, avoid contact with rocks, earth or metal, and clean and sharpen regularly. When storing the chainsaw, it is a good idea to keep the chain lubricated and dry to protect it from corrosion.
6. Can I use this chain in other brands of chainsaws?
Theoretically, this is possible if the saw has a guide bar with identical parameters (pitch .325", 1.3 mm groove width and 66 guide links). However, it is recommended to use the chain in accordance with the recommendations of the manufacturer of the device. The best compatibility and safety is ensured by using it on dedicated Oleo-Mac chainsaws.
7. Is the chain ready to use right out of the box?
Yes, the chain is sharpened at the factory and is suitable for immediate use after proper installation and lubrication. However, it is recommended that after the first few minutes of operation, the chain tension be rechecked and adjusted if necessary.
Choosing the OLEO-MAC 1.3 MM cutting chain .325" 66 PROVIDING BRANCH 30629004C you are investing in a proven solution that will increase the efficiency, safety and comfort of your daily work with your chainsaw.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.