CARTRIDGE FILTER CLASS M 1002034900
- M-class cartridge filter 1002034900 for OMV22/31/32 vacuum cleaners. Effective filtration of construction, wood and quartz dust >0.1 mg/m³. Durable, easy to install and maintain, ensures safe, professional work on site and in the workshop.
CARTRIDGE FILTER CLASS M 1002034900 - professional dust filtration for industrial vacuum cleaners OMV22/31/32
What is the M-Class CARTRIDGE FILTER 1002034900?
CARTRIDGE FILTER CLASS M 1002034900 is a high-quality filter cartridge designed for professional industrial vacuum cleaners. Its task is to effectively stop harmful dusts of class M - health-threatening dusts with limit values > 0.1 mg/m³. Thanks to the special cartridge design and the use of an efficient filter medium, the filter ensures high efficiency of separation of even very fine dust fractions, protecting the user and the vacuum cleaner itself from premature wear.
The M-class cartridge filter is recommended wherever wood dust, dust from putty, fillers, varnish, plaster, cement, concrete, adhesive mortar, paints (such as latex and oil), as well as quartz materials such as sand and gravel are present. It is an ideal solution for renovation and construction companies, carpenters, workshops, finishing teams and individual users expecting professional protection.
Where the CARTRIDGE FILTER CLASS M is mounted 1002034900?
CARTRIDGE FILTER CLASS M 1002034900 is mounted inside the filter chamber of the industrial vacuum cleaner, in the place provided by the manufacturer of the device. The cartridge was designed specifically to work with popular models of vacuum cleaners:
- OMV22
- OMV31
- OMV32 - in this model the filter is standard equipment
Thanks to the precise matching of dimensions and appropriate design with sealing, the installation of the filter is quick and intuitive. Simply remove the used cartridge, clean the mounting slot, and then seat the new cartridge filter in the vacuum cleaner, making sure it adheres evenly and tightly. A properly installed filter guarantees the vacuum cleaner's full efficiency and user safety when working with dusty materials.
Application of cartridge filter of M class 1002034900
The filter is designed for use in demanding conditions at construction sites, workshops, industry and professional finishing work. It is especially recommended for suction:
- wood dust from cutting, sanding and milling of wood and wood-based panels,
- dust from jointing compounds and smoothers used in leveling walls and ceilings,
- dusts from fillers and varnishes,
- dust from gypsum, cement, concrete and adhesive mortars,
- dust from paints, including latex and oil-based paints,
- quartz materials (e.g., sand and gravel) resulting from cutting, drilling or grinding operations.
The use of a class M filter is particularly important for work where there are dusts considered hazardous to health, including those containing silica. Thanks to the high filtration efficiency, the risk of inhaling harmful particles is reduced, the comfort of work and the safety of personnel at the workplace are improved.
Full product description
M-class cartridge filter.
Fits OMV22/31/32 vacuum cleaners.
Comes as standard equipment for OMV32.
Dust filtration for class M
- health-threatening dusts with a value of. limits > 0-.1 mg/m. For all wood dusts, dusts from putty, fillers, varnishes, gypsum, cement, concrete, adhesive mortar, paints (such as latex and oil) and quartz materials such as sand and gravel.
CARTRIDGE FILTER CLASS M 1002034900 for OMV22/31/32 vacuum cleaners - safety for working with hazardous dusts
The key advantage of the M-class cartridge filter 1002034900 is its high efficiency in retaining hazardous dusts. Class M means that the filter meets the stringent health protection requirements for workers exposed to fine particles. Dusts with a limit value > 0.1 mg/m³ belong to a particularly dangerous group - their prolonged inhalation can lead to serious health problems, including respiratory diseases.
In daily practice, the filter is ideal during:
- sanding of gypsum drywall in apartments and offices - the filter effectively stops fine dust, which usually floats in the air and settles on all surfaces,
- cutting drywall and making holes for installations - a vacuum cleaner with an M-class filter minimizes dust in the room,
- work in carpentry plants, where wood dust from cutting, sanding or milling of furniture components is constantly present in the air.
Thanks to the high efficiency of filtration, the user not only gains a cleaner workstation, but most importantly reduces the risk of inhaling harmful particles, which over the years translates into less strain on the respiratory system.
Durable cartridge design - long filter life and stable vacuum cleaner operation
M-class cartridge filter 1002034900 is distinguished by its robust cartridge design. The corrugated filter surface significantly increases the active surface area, resulting in better airflow and greater dust absorption. Properly selected filter material is resistant to mechanical damage resulting from the flow of contaminated air with mineral and wood dust particles.
In practice, this means:
- longer life of the filter cartridge - the filter needs to be replaced less often, which reduces operating costs,
- a stable, high level of suction power of the vacuum cleaner - even when working intensively for a long time,
- better protection of the vacuum cleaner motor from dust particles that could shorten its life.
For example, during a multi-day apartment renovation involving tiling, sanding, cutting tiles and cleaning up after tiling work, the M-class cartridge filter ensures that the vacuum cleaner stays in good shape and has a high dust collection efficiency throughout the renovation period.
Perfect fit for OMV22, OMV31 and OMV32 vacuum cleaners - convenience and reliability
CLASS M CARDRIDGE FILTER 1002034900 has been developed to be fully compatible with vacuum cleaners: OMV22, OMV31 and OMV32, with the OMV32 model being standard equipment. This means that replacing the filter with a new one is completely hassle-free - no additional adapters or modifications are required.
Thanks to the perfect fit:
- you provide the vacuum cleaner with optimal working conditions and full suction capacity,
- you minimize the risk of leaks through which fine dust could enter the device or back into the air,
- you save time - the replacement of the cartridge is quick and intuitive, which is important especially for intensive work in service companies.
Example: a cleaning company servicing several facilities after renovations can equip all its OMV22/31/32 vacuum cleaners with the same type of filter. This simplifies spare parts logistics, storage, and equipment service - all you need is one filter cartridge that is universal for these models.
High filtration efficiency of construction, wood and quartz dusts
The scope of application of the cartridge filter of the M class 1002034900 includes a very wide range of dusts, typical for the construction, renovation and carpentry industry. The filter is designed to handle dust:
- wooden - resulting from the processing of solid wood, MDF, plywood, veneer,
- of jointing compounds, smoothers, fillers and varnishes,
- of gypsum, cement, concrete and adhesive mortars used in thermal insulation systems or tiling,
- of paints, including latex and oil-based paints, applied by roller, spray or brush,
- from quartz materials - sand, gravel, mortars containing quartz aggregate.
In practice, the filter works great m.in. during:
- grinding insulating systems with mesh and adhesive mortar,
- cleaning concrete floors after cutting or drilling holes,
- collecting dust from renovation work in old buildings (cupping plaster, leveling walls, milling furrows for installations),
- cleaning workshops where wood and mineral dusts are simultaneously present.
By using an M-class filter 1002034900, not only the comfort of work and the cleanliness of the environment is improved, but also the health and safety requirements for working in dusty environments are met, which is particularly important in contractors and manufacturing plants.
Easy operation and maintenance - convenience for the user
M-class cartridge filter 1002034900 is designed for convenient operation. Access to the filter on OMV22/31/32 vacuum cleaners is easy, allowing you to quickly perform basic maintenance tasks, such as periodic cleaning of the filter (for example, by gently shaking it off or blowing it out with air - as recommended by the vacuum cleaner manufacturer) and replacing it.
Thus, the user gains:
- shorter downtime in operation - quick replacement or cleaning of the filter,
- lower operating costs - extending the life of the vacuum cleaner and the filter itself,
- confidence that the device operates at full capacity, without sudden drops in suction power due to clogged cartridge.
For example, a finishing crew completing several jobs a week can schedule regular filter maintenance so that industrial vacuum cleaners are always ready for intensive work and the risk of failure is reduced to a minimum.
Key benefits of M-class cartridge filter 1002034900
- high filtration efficiency of class M dust (including health-threatening dust with limits > 0.1 mg/m³),
- full compatibility with OMV22, OMV31 and OMV32 vacuum cleaners,
- standard equipment of the OMV32 model - easy replacement with a new cartridge,
- robust cartridge design for high performance and longer life,
- effective retention of wood, construction, paint and quartz dust,
- improving occupational safety and reducing exposure to inhalation of harmful dust,
- convenient operation and easy maintenance.
FAQ - Frequently Asked Questions
1. To which vacuum cleaners the CARDRIDGE FILTER CLASS M fits 1002034900?
The filter is designed for OMV22, OMV31 and OMV32 industrial vacuum cleaners. On the OMV32 model, it is standard equipment, which guarantees full compatibility and easy replacement.
2. What dusts can the M class filter filter 1002034900?
The filter is suitable for the filtration of health-threatening dusts with limit values > 0.1 mg/m³. This includes m.in. wood dusts, dusts from putties, fillers, varnishes, gypsum, cement, concrete, adhesive mortars, paints (latex and oil), and quartz materials such as sand and gravel.
3. Can the filter be cleaned or does it need to be replaced right away?
Depending on the intensity of use, it is possible to gently clean the filter periodically (e.g., by shaking it off or blowing air - as recommended by the vacuum cleaner manufacturer). When the filter permanently loses capacity or becomes damaged, replace it with a new one to maintain full filtration efficiency.
4. How often should the M-class cartridge filter be replaced?
Frequency of replacement depends on the conditions and intensity of work. When working in a dusty environment (e.g., construction site, carpentry workshop), it is recommended to check the condition of the filter more often and replace it whenever there is a noticeable decrease in suction power despite cleaning the cartridge or when the filter is visibly damaged.
5. Is the use of a class M filter necessary for construction work?
The use of a class M filter is strongly recommended when working with dusts considered hazardous to health, especially when working with materials containing silica (e.g., concrete, plaster, mortar). A filter of this class allows you to meet health and safety requirements and significantly reduces the exposure of workers to harmful dusts.
6. Can I use this filter in a vacuum cleaner model other than OMV22/31/32?
The filter is designed specifically for OMV22, OMV31 and OMV32 vacuum cleaners. It may be impossible or ineffective to apply it to other models due to different dimensions and mounting methods. For safety and maximum efficiency, it is recommended to use the filter only on dedicated models.
7. How to store spare M-class cartridge filters?
Store filters in a dry, clean place, away from direct exposure to moisture and dirt. Original packaging protects the cartridge from dust and mechanical damage before first use.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.