FOAM FILTER 1002024000
- Foam filter 1002024000 for OMV21/22/31/32 vacuum cleaners - original wet sponge filter. Effectively protects the turbine from water, foam and dirt, ensuring high suction power and long life of the vacuum cleaner.
Foam filter
(also called sponge) used to protect the turbine in OMV21/22/31/32 type vacuum cleaners during wet operation.
What is a foam filter 1002024000 and why it is so important for your OMV21/22/31/32 vacuum cleaner?
Foam filter 1002024000 is a high-quality, reusable consumable element made of special porous technical foam with increased resistance to water and contaminants. Its purpose is to effectively protect the vacuum cleaner turbine from the ingress of foam, moisture and fine dirt particles during wet operation. This keeps the turbine clean, dry and protected from damage, and the entire vacuum cleaner runs stably and at full suction power.
In practice, the foam filter 1002024000 acts as the first line of defense between the dirt tank and the sensitive components of the vacuum cleaner. Holds water suspended solids, liquid droplets, foam residue from cleaning agents, as well as larger solid particles. Thanks to the flexible foam structure, the filter does not block the airflow, ensuring optimal performance even during intensive work for hours in demanding conditions.
It's a solution particularly valued in the cleaning industry, industrial plants and wherever a wet vacuum cleaner works almost every day - an investment in an original foam filter quickly translates into lower service costs and longer equipment life.
Where you install the foam filter 1002024000 in OMV21/22/31/32 vacuum cleaners and how the replacement is done?
Foam filter 1002024000 is mounted directly in the working part of the vacuum cleaner, in the protection zone of the turbine. In OMV21, OMV22, OMV31 and OMV32 type vacuum cleaners, it acts as a safety filter in wet mode, so it is installed between the tank chamber and the air intake turbine unit.
Due to the sleeve design, the filter is applied to a dedicated basket or guide - depending on the model of the device. Flexible foam perfectly adapts to the shape of the chamber, ensuring that the filtration system is airtight and that there are no leaks that could lead to water getting inside the turbine. Installation does not require tools - just remove the lid of the vacuum cleaner, remove the old filter and slide the new element into place.
Examples of daily use:
- Office building cleaning company - after each major carpet cleaning, the operator puts on a fresh foam filter before starting work, which protects the turbine from detergent foam.
- Workshop or manufacturing plant - When collecting coolants, process water or mud, the foam filter traps suspended solids and moisture, preventing engine seizure.
- Private user - when occasionally washing carpets or car upholstery, changing the foam filter is quick and intuitive, making it significantly easier to operate the vacuum cleaner.
Regular inspection of the filter condition (after each intensive wet cleaning) and its timely replacement are crucial for trouble-free operation of the vacuum cleaner. Immediately replace a damaged, faded or excessively dirty filter with a new one 1002024000.
Use of foam filter 1002024000 - professional wet work in OMV21/22/31/32 vacuum cleaners
The foam filter 1002024000 is designed specifically for wet work, that is, when the vacuum cleaner sucks up water, dirty liquid, mud or detergent solution. Its purpose is to protect the turbine from flooding and damage during intensive water extraction and to reduce the amount of foam entering the suction system.
It will be perfect for the following applications:
- Professional floor cleaning - In warehouses, workshops, garages or industrial plants where spills, slush or dirty water after washing are removed daily.
- Washing and laundering of carpets and rugs - when the vacuum cleaner collects water with detergent, the foam filter effectively reduces the penetration of foam into the turbine, increasing operational safety.
- Cleaning up after emergencies and flooding - for sudden leaks, basement flooding or flooding of rooms, the filter plays a key role in the rapid and safe extraction of large amounts of water.
The use of the original foam filter 1002024000 guarantees compatibility with OMV21/22/31/32 vacuum cleaners and full use of their parameters. Unlike substitutes of uncertain origin, the properly selected density and structure of the foam provide the ideal balance between effective filtration and free airflow, which has a direct impact on the suction power.
Key features of the sponge filter 1002024000 - quality, durability and reliability in daily use
Sponge filter 1002024000 is distinguished by a set of features that are particularly important for professional users and demanding individual customers:
- High quality material - the filter is made of selected foam of appropriate density, resistant to water, foam and standard chemicals used in the cleaning industry. As a result, it does not crumble, does not deform and retains its filtration properties for a long time.
- Durability and reusability - after each cycle of operation, the filter can be easily removed, rinsed in clean water, allowed to dry completely and reinstalled. This operation significantly reduces service costs and reduces waste.
- Reliability in difficult conditions - The sponge filter 1002024000 is designed for heavy-duty operation: frequent extraction of water, mud, dirty process fluid or foam. Sturdy construction and careful finishing minimize the risk of tearing or dislodging during use.
Daily user benefits:
- Lower repair costs - Effective protection of the turbine reduces the risk of costly failures related to flooding or fouling of the turbine.
- Consistently high vacuum cleaner performance - clean foam filter does not cause drops in suction power, resulting in faster and more efficient operation.
- Safety and peace of mind - Use of dedicated filter 1002024000 eliminates concerns about damaging key components of the device during wet operation.
Foam filter 1002024000 for OMV21/22/31/32 vacuum cleaners - compatibility, parameters and selection for the device
The 1002024000 model was developed specifically for OMV's line of multi-function vacuum cleaners, in particular:
- OMV21 - dry and wet vacuum cleaner, used in small businesses and workshops,
- OMV22 - a vacuum cleaner with increased capacity, used in professional cleaning companies,
- OMV31 - a model designed for more demanding industrial applications,
- OMV32 - powerful vacuum cleaner for intensive work in large facilities.
Choosing the right filter is crucial to the proper operation of the entire filtration system. The foam filter 1002024000 has been dimensionally and structurally matched to the above-mentioned devices, so that:
- perfectly adheres to the fasteners, creating a tight protective barrier,
- provides stable support during operation - it does not slip or curl,
- no additional modifications or adapters required.
Examples of situations in which the right choice of filter matters:
- Company service - Technician replaces used filters across OMV's fleet of vacuum cleaners using a single, universal model 1002024000, simplifying spare parts logistics.
- New user - A small business owner buys an OMV22 vacuum cleaner and at the same time procures additional foam filters 1002024000 to ensure continuous operation without downtime.
- Equipment rental - cleaning machine rental company changes the foam filter after each customer, confident that the original product will always be a perfect fit.
Basic technical information:
- Filter type: foam (sponge)
- Purpose: to protect the turbine in wet vacuum cleaners
- Compatibility: vacuum cleaners type OMV21, OMV22, OMV31, OMV32
- Type of work: wet (collection of water, liquids, foam)
- Construction: sleeve, flexible foam
- Product/System Code: 1002024000
- EAN code: 8013298101566
How to care for the foam filter 1002024000 to extend its life and ensure maximum protection of the turbine?
Proper maintenance of the foam filter 1002024000 is critical to its longevity and filtration efficiency. Simple maintenance allows you to use the same item repeatedly without losing performance.
Basic principles of operation and care:
- After wet work, remove the filter from the vacuum cleaner and rinse it thoroughly in clean, lukewarm water to remove any residual dirt and detergent.
- Do not use aggressive chemicals or hot water, which could accelerate the degradation of the material.
- Let the filter dry completely in an airy place. Do not install a damp filter to avoid mold growth and unpleasant odors.
- Regularly inspect the condition of the foam - if you notice cracks, abrasion or permanent deformation, replace the filter with a new model 1002024000.
Daily benefits of proper care:
- assurance that the vacuum cleaner's turbine remains effectively protected,
- maintain optimal suction power and performance of the device,
- less wear and tear on consumable parts and lower service costs.
FAQ - Frequently asked questions about the foam filter 1002024000
1. Can the foam filter 1002024000 also be used for dry work?
The filter is designed primarily for wet operation, as protection of the turbine from moisture and foam. In some cases, it can assist filtration for dry operation, but the main barrier to dust and dust should be dedicated dry filters (e.g., main filter, filter bag). The best protection comes from using the filter as intended.
2. How often should you replace the foam filter 1002024000?
The frequency of replacement depends on the intensity of use. In professional cleaning companies working on a daily basis, it is recommended to inspect after each major job and replace when there is noticeable wear and tear (cracks, abrasion, loss of elasticity). With occasional home use, the filter can last for many months as long as it is properly cleaned and dried.
3. Is the filter machine washable?
Washing the filter in a washing machine is not recommended. The best way to clean is to rinse by hand in clean, lukewarm water. A washing machine could mechanically damage the structure of the foam, shortening its lifespan.
4. How do I know that the filter is properly installed?
Once in place, the foam filter 1002024000 should sit evenly on the fasteners and not slide off when moved slightly. Before closing the case, it is a good idea to check that no part of the foam is folded or rolled - this will ensure full filtration efficiency during wet operation.
5. Can replacements be used instead of the original filter 1002024000?
Replacements of unverified quality may not provide adequate sealing and moisture resistance, increasing the risk of turbine damage. Using the dedicated foam filter 1002024000 ensures a proper fit for OMV21/22/31/32 vacuum cleaners and the highest level of protection.
6. Does the foam filter 1002024000 affect the suction power of the vacuum cleaner?
Yes - but in a positive way. A clean, unclogged foam filter ensures optimal airflow so the vacuum cleaner maintains high suction power. Neglecting to clean the filter can lead to a decrease in performance, so it is worth ensuring that the filter is regularly flushed and replaced.
7. Does the filter fit other vacuum cleaner models than OMV21/22/31/32?
Model 1002024000 was developed for OMV series vacuum cleaners. If you want to use it in another device, you should always check the recommendations of the equipment manufacturer or consult the service to be sure of full compatibility.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.