SAW AIR FILTER GS630 956-962-970 098000092R
- Oleo-Mac air filter 098000092R for saws 956, 962, 965 HD, 970, 971, 981, GS 630 and drill rig MTL 85 R. Effectively protects the engine in harsh, dusty operating conditions. Ideal for forest, orchard and construction sites.
GS630 956-962-970 chainsaw air filter 098000092R is a high-quality consumable component designed for Oleo-Mac professional chainsaws and drills. Provides effective filtration of the air drawn into the engine, protecting it from dust, wood chips and other contaminants generated during intensive work in the forest, orchard or on the construction site. Regular replacement of this filter extends the life of the drive unit, stabilizes its operation and maintains the full power of the machine.
Where the GS630 956-962-970 098000092R air filter is installed?
The filter is mounted in the air filter compartment, usually under the service cover of the saw or drill rig. Its task is to purify the air drawn into the carburetor and combustion chamber. Proper fit to the indicated Oleo-Mac models guarantees fast installation, perfect sealing and secure seating, which minimizes the risk of unwanted particles entering the engine.
Application of air filter 098000092R
The component is designed to work in harsh, dusty conditions. The air filter will be ideal wherever chainsaws and drilling machines are exposed to intensive contact with shavings, sawdust, soil and fine dust - during tree felling, firewood cutting, gardening, orchard work or when drilling in the ground.
Air filter for Oleo-Mac chainsaws / drills - compatibility and purpose
Air filter for Oleo-Mac chainsaws / drills
For chainsaw models:
- 956
- 962
- 965 HD
- 970
- 971
- 981
- GS 630
For drill models: Oleo-Mac
- MTL 85 R
Oleo-Mac GS 630 956-962-970 air filter - confident engine protection in all conditions
The most important task of the air filter GS630 956-962-970 098000092R is to effectively protect the two-stroke engine from harmful contaminants. Durable construction and properly selected density of filter material stops fine dust, sawdust and other particles floating during operation of a saw or drill rig. This allows clean air to enter the combustion chamber, reducing wear on the cylinder, piston and rings and significantly reducing the risk of costly repairs.
In practice, this means that during felling trees in the forest,sawing firewood by the house whether drilling holes in the ground, the engine of your machine runs stably and maintains the right power parameters. Even with prolonged use in a heavily dusty environment, the filter forms an effective barrier, and the device remains fully operational.
An additional benefit of using the right air filter is also easier engine starting. Clean air guarantees the correct composition of the fuel-air mixture, which translates into quick firing both cold and warm. This is especially important for professionals who cannot afford downtime at work.
Compatible with Oleo-Mac 956, 962, 965 HD, 970, 971, 981 and GS 630 chainsaws - one solution for multiple machines
Air filter 098000092R has been designed to perfectly fit a wide range of Oleo-Mac chainsaws: 956, 962, 965 HD, 970, 971, 981 and GS 630. This allows users with several devices of this brand to benefit from a single universal service solution. This makes it easier to both schedule maintenance and maintain an inventory of consumable parts.
In everyday use, such as in forestry companies or farms where different models of chainsaws are operated simultaneously, using the same type of filter means fewer mistakes when selecting parts and faster service. The operator does not have to wonder whether the cartridge will fit a particular saw - he simply reaches for the filter marked with the part number 098000092R and is assured of a proper fit.
Proper compatibility also affects the safety of use. A properly seated filter eliminates the risk of leaks through which contaminants could bypass the filter element. This is especially important during intensive work in the forest, where equipment is exposed to extreme amounts of wood dust.
Use in Oleo-Mac MTL 85 R drill rigs - reliability when drilling in difficult terrain
Air filter GS630 956-962-970 098000092R works perfectly not only in chainsaws, but also in professional oleo-Mac MTL 85 R drilling machines. When drilling in soil or ground with a high mineral dust content, a mixture of soil, sand and small stones floats around the drill rig. This is a very demanding operating environment for any internal combustion engine.
With the use of this filter, the air sucked into the MTL 85 R engine is effectively cleaned, which significantly extends the life of the machine. In practice, this will be appreciated by both companies drilling for fences, as well as farmers installing posts in the field whether teams installing irrigation systems. In each of these applications, the filter minimizes the risk of failures resulting from dirt being sucked into the cylinder.
Regular filter changes in the drill rig also translate into more even engine operation under prolonged load. This is important especially when drilling a series of deep holes, when the drive unit runs for hours without a break.
Easy maintenance, quick replacement - practical benefits for the user
Air filter design 098000092R was developed with ease of use in mind. Its shape and the way it is attached allow quick replacement even in field conditions, without the need for specialized tools. Simply remove the filter chamber cover, remove the used element, clean the chamber of any major dirt and insert the new cartridge.
In practice, a service mechanic or chainsaw operator can perform this operation in a matter of minutes, for example. during a short break in the forest or between successive wells. This means less downtime and greater efficiency for the entire workforce.
The filter is also characterized by deformation-resistant housing, so it retains its proper shape and tightness even after prolonged use. Smooth surfaces facilitate periodic external cleaning (e.g., by gently blowing with compressed air), which can further extend its life between replacements - while, of course, following the manufacturer's recommendations.
High-quality workmanship and durable materials - an investment in the long life of the machine
Air filter GS630 956-962-970 098000092R is made of durable plastic and filter material with high efficiency of capturing fine particles. The components used are resistant to the effects of fuels, oils and high temperatures around the engine, so that the filter retains its properties throughout its lifetime.
For the user, this means less frequent replacement compared to low-quality replacements, and thus lower servicing costs in the long run. The stable quality of the filter material also ensures the repeatability of the airflow parameters, which has a positive effect on the engine's operating culture and fuel consumption.
In practice, during everyday work in the forest, orchard or on a construction site, the user gains confidence that even under heavy loads the filter will not delaminate, collapse or suffer mechanical damage that could lead to impurities entering the carburetor.
Parameters and technical data of the air filter 098000092R
- Purpose: air filter for Oleo-Mac chainsaws and drills
- Saw models: 956, 962, 965 HD, 970, 971, 981, GS 630
- Drilling rig model: Oleo-Mac MTL 85 R
- Filter type: air filter for two-stroke internal combustion engines
- Material: durable plastic + high efficiency filter cartridge
- Product code / part number: 098000092R
- Application: protection of the engine from dust, sawdust and debris while working in the forest, garden, orchard, construction site and drilling in the ground
FAQ - Frequently asked questions about GS630 956-962-970 098000092R air filter
1. How often should you change the air filter in your Oleo-Mac chainsaw or drill rig??
Frequency of replacement depends on the intensity of use and operating conditions. When working in a heavily dusty environment (forest, sawmill, dry ground), it is recommended to check the filter after each working day and replace it when it is visibly dirty or clogged. In typical amateur conditions, post-season replacement is often enough.
2. Does the 098000092R filter fit all Oleo-Mac chainsaws?
Not. This filter is designed for selected models: 956, 962, 965 HD, 970, 971, 981 and GS 630. Before buying, it is a good idea to compare the part number and model of the device with the manufacturer's data to be sure of compatibility.
3. Can the filter be cleaned and reused?
Gentle external cleaning is acceptable, for example, by carefully blowing compressed air from the clean side to the dirty side. However, the air filter is a consumable item, and once it becomes significantly dirty or damaged, it is imperative to replace it with a new one so as not to risk damaging the engine.
4. What are the symptoms of a worn or clogged air filter?
The most common symptoms are: a decrease in the unit's power, uneven engine operation, difficulty getting into gear, increased fuel consumption, and starting problems. If you notice these symptoms, first check the condition of the air filter.
5. Is it difficult to replace the air filter yourself?
No, air filter replacement GS630 956-962-970 098000092R is simple and can be done by yourself. Simply remove the filter compartment lid, remove the old cartridge, clean the compartment of any major debris and insert the new filter, paying attention to the correct alignment of the.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.