DRILL EXTENSION 38 CM 028200289
- Professional Drill Extension 38 CM 028200289 for double drill MTL 85R. Ideal for deep holes in wood and lightweight materials. Stable, durable, for hand drills and MTL 85R equipment.
38 CM drill bit extension 028200289 - professional deepening of bores in wood and more
DRILL EXTENSION 38 CM 028200289 is a sturdy, professional drill accessory that allows you to conveniently make deep holes in hard-to-reach places. With a length of 38 cm and adaptation to double drill bits for MTL 85R will prove itself both in intensive workshop work and during advanced field assembly work.
What is the 38 CM drill bit extension 028200289?
This is a specialized working extension mounted between the drill chuck and the double drill bit. Extends the effective reach of the tool by 38 cm, ensuring stable guidance of the drill bit when drilling deep. The extension design is engineered for safe torque transfer and maximum drilling precision.
Where you mount the 38 CM drill bit extension 028200289?
The extension mounts directly in the chuck of the drill or dedicated drive, and on its end attaches the double drill bit for MTL 85R. Such a solution guarantees a stable connection, reduces drill bit runout and preserves hole alignment even when the working length is long. Will work well with hand drills, MTL 85R and other compatible process drilling machines.
Application of the 38 CM drill bit extension 028200289
Enable deeper drilling. Designed for double drill bits up to MTL 85R.
With its greatly extended range, the extension is ideal for:- drilling through-holes and blind holes in thick structural components,
- installation work in restricted areas (e.g., behind beams, inside frame walls, in canopies),
- preparation of holes for routing wires, pipes and fasteners,
- professional applications in construction, carpentry, joinery, installation, and assembly of wooden and light steel structures.
Drill extension 38 cm 028200289 - greater drilling range and secure work in hard-to-reach places
The biggest benefit of using 38 cm drill extension 028200289 is to significantly increase the drilling range while maintaining high tool stability. The additional 38 cm of working length allows you to work safely and comfortably where standard drills prove to be too short. This solution will be especially appreciated by those who perform:
- Deep holes in thick parts - Beams, columns, joists, or massive edges in roof and terrace structures often need to be drilled through the entire thickness. With the extension, the double drill bit for the MTL 85R will easily pass through without having to drill on both sides.
- Holes in hard-to-reach places - when renovating and modernizing buildings, it is not uncommon to have to drill behind building components or under ceilings. The extension allows you to reach the drilling point without removing large sections of the structure.
- Installation work - guiding cables, wires or pipes through walls, ceilings or plasterboard developments requires long and precise drillings. The length of 38 cm allows to make them from a single approach, which saves time and minimizes the risk of damage.
Thus, it will find everyday use both on the construction site and in the home workshop of DIY enthusiasts making, for example, deep holes for anchors, screws or installation passages.
Compatible with MTL 85R double drill bits - a reliable set for professionals
The extension was designed specifically for double drill bits for MTL 85R, which guarantees a perfect fit and high reliability during operation. This is especially important for professional users who expect repeatable results and minimal downtime.
- Reliable transmission - Precisely made sockets and working tips ensure a stable connection with the drill and drive. As a result, torque is transferred without slippage, and the drill bit does not "dance" in the hole.
- Lower risk of damage - Dedicated cooperation with the MTL 85R system reduces the risk of drill edge breakage, bit deformation or damage to the drill chuck. This translates into a longer lifespan for the entire kit.
- Efficient continuous operation - In batch applications, such as the assembly of wooden structures, making dozens of holes a day is the norm. The MTL 85R + 38 cm extension set allows you to carry out work quickly, without frequent repositioning of tools and alignment adjustments.
In practice, this means that an installer, carpenter or builder can take a single, proven working configuration on a job and effectively complete most deep drilling tasks without looking for compromises or equipment modifications.
Durable construction and comfort - 38 cm drill extension for years to come
In designing 38 CM DRILL EXTENSION 028200289 care was taken not only for functionality, but also for durability and ergonomics of work. The result is a product that stands up well to intensive use and harsh conditions on the construction site.
- Solid materials - the use of durable metal alloys and appropriate hardening of the working elements allow safe operation even under heavy loads. The extension is resistant to deformation and wear resulting from frequent tool changes.
- Stability during drilling - well-thought-out geometry and appropriate body diameter reduce deflection and vibration. This ensures that the hole is guided axially, which is of great importance when drilling long holes, such as through several layers of material.
- Convenience and safety - The length of 38 cm provides a comfortable distance between the operator and the drilling site, which improves work safety. At the same time, the tool remains handy enough to maintain control of the drilling path.
In typical everyday applications - from assembling roof trusses, to drilling holes for threaded rods, to drilling for installation passages in the workshop - the user gets a tool they can rely on for the long term.
Technical specifications of the 38 CM drill bit extension 028200289
- Overall length: 38 cm
- Purpose: for double drill bits for MTL 85R
- Main Function: enable deeper drilling
- Product type: drill bit extension / working extension
- Product code: 028200289
- EAN code: 8026619043421
These parameters make the extension a versatile yet specialized piece of equipment for anyone who uses the MTL 85R double drill in their work and needs trouble-free access to deep holes.
Why choose the 38 cm drill extension 028200289 for your workshop?
Selecting 38 CM DRILL EXTENSION 028200289, you are investing in an accessory that realistically enhances the capabilities of your power tools. It is not only more comfortable to work with, but also more precise and safer when drilling deep wells.
- Saving time - No need to drill on two sides or use makeshift solutions means faster turnaround and fewer revisions.
- Professional effects - perfectly axial, equal holes of repeatable diameter translate into solidity of the entire structure and aesthetics of workmanship.
- Universal application - From the construction of frame houses, to the installation of terraces and gazebos, to installation work, the extension will work in many situations, becoming one of the more frequently used drill accessories.
For professionals, it is a tool to improve productivity and quality of work, for discerning do-it-yourselfers - a way to achieve expert-level results.
FAQ - Frequently Asked Questions about the 38 CM SPRING SPRINKLER 38 CM 028200289
1. Which drill bits the 38 CM drill bit extension fits with 028200289?
The extension is designed primarily for double drill bits for MTL 85R. This configuration ensures the best cooperation, stability and durability of both the drill bit and the extension itself.
2. Can I use this extension in a regular hand drill?
Yes, provided that the chuck of your drill is compatible with the extension bit. In practice, most standard electric or cordless drills will allow trouble-free installation, but it's always a good idea to verify the method of attachment.
3. What materials this product is suitable for?
The extension by itself does not limit the type of material - the double drill bit selected is decisive. It is most commonly used for drilling in structural wood, glued wood, wood-based materials (plywood, OSB, particleboard) and lightweight building materials.
4. Can the extension cord be used for continuous operation under heavy load?
Yes, the product is designed for professional applications. Robust design and dedicated purpose to work with the MTL 85R system allow for intensive daily use, while maintaining the principles of proper use.
5. How to take care of the extension to make it last as long as possible?
When you're done, it's a good idea to clean the extension from dust and chips, check the condition of the working bits, and store it in a dry place, preferably with the rest of your drill accessories. Avoid working with damaged drills or in incompatible chucks so as not to subject the extension to excessive strain.
6. Will the 38 cm length be sufficient for most applications?
The length of 38 cm, combined with a suitable double drill bit, makes it possible to drill most of the typical deep holes found in construction and assembly work. In many cases, it eliminates the need for specialized, extra-long drills, which are more expensive and more difficult to guide.
Selecting 38 CM DRILL EXTENSION 028200289, you gain a proven, durable and convenient-to-use tool that will significantly expand the capabilities of your drill and the entire MTL 85R drilling system.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.