OLEO-MAC BEVEL GEAR GREASE 125 G 001000677B
- Oleo-Mac angle gear grease 125 g 001000677B - high quality lithium grease with molybdenum disulfide MoS2 for petrol scythes, hedge trimmers and augers. Protects gears under heavy load, reduces friction, noise and wear. Meets standards
OLEO-MAC 125 G BEVEL GEAR GREASE 001000677B - PROFESSIONAL HEAVY DUTY GEAR PROTECTION
Oleo-Mac 125 g bevel gear grease is a special quality lithium grease with molybdenum disulfide for bevel gears, flexible gears, cam mechanisms in hedge trimmers, reducers in augers. Recommended for all mechanisms subjected to heavy loads. Exceeds specifications: ISO 6743-9; DIN 51825 KPF 2K - 30. Packaging: carton. Quantity per carton: 24.
What is Oleo-Mac 125 g 001000677B bevel gear grease?
Oleo-Mac 125 g 001000677B Angle Gear Lubricant is a high-end, professional lubricant developed for gardening and construction machinery operating in extreme conditions. It is a lithium grease with the addition of molybdenum disulfide (MoS2), which provides excellent lubricating properties, a high coefficient of pressure resistance and excellent adhesion to metal surfaces. As a result, the lubricant forms a durable protective film on gear teeth, shafts and mating parts, effectively reducing friction, overheating and accelerated wear and tear.
The product was designed specifically for the requirements of Oleo-Mac equipment (m.in. petrol scythes, hedge trimmers, soil augers), but it can also be successfully used in other brands of equipment, wherever the manufacturer recommends the use of lithium grease with molybdenum disulfide additive. Capacity of 125 g in a practical tube allows convenient and precise dispensing of grease without contaminating hands and surroundings.
The lubricant exceeds the requirements of key quality standards ISO 6743-9 and DIN 51825 KPF 2K-30, which means that it provides stable operation over a wide temperature range and under significant mechanical loads. It's a product that significantly extends the life of gearboxes and reduces equipment operating costs.
Where Oleo-Mac 125 g grease is used - typical application sites and installation
Oleo-Mac 125 g bevel gear grease was developed for lubrication hot spots in garden and construction machines. It is most commonly used in:
- Bevel and bevel gearboxes - located, for example, in the heads of petrol scythes, trimmers and trimmers. High torque is transferred from the drive shaft to the cutting head at these locations, so proper lubrication is critical to the life of the gears.
- Flexible gears and flexible drive shafts - used in multifunctional equipment (garden harvesters) with interchangeable attachments, where the lubricant protects the components from seizure and excessive noise during operation.
- Cam mechanisms in hedge trimmers - responsible for the movement of the cutting blades. Lubricant reduces resistance to movement, protects sliding surfaces and gears from seizure, and increases the smoothness of knife operation.
- Reducers in soil augers - Where gears and bearings are subjected to very high axial and impact loads when drilling holes in hard ground.
Lubricant is usually applied through special plugs or grease control screws located in the gearbox housing. On most devices, simply unscrew the cap, introduce a portion of grease from the tube, and then tighten it again. Thanks to its thick consistency, the lubricant does not flow out on its own, remaining exactly where it is needed.
Examples of daily applications:
- Regular lubrication of the angle head on the petrol lawnmower used for mowing lawns around the house and on the allotment.
- Maintenance of hedge trimmer gears before the season of cutting tui, yew or ligustrum hedges.
- Lubricating the soil auger reducer before drilling holes for fence posts or terrace foundations.
Application and benefits of Oleo-Mac 125 g angle gear grease 001000677B
The application of Oleo-Mac 125 g grease includes all gear mechanisms subjected to heavy loads, where high resistance to abrasion, pressure and temperature is required. It is the ideal choice for both private users and professional garden, construction, municipal or forestry service companies.
Key user benefits:
- Extended life of gears and mechanisms - Molybdenum disulfide forms a very strong sliding layer on the metal surface, which minimizes friction even in the temporary absence of lubricant and under high pressure conditions.
- Better protection against wear and corrosion - Lithium grease provides very good adhesion to metal parts and provides a protective barrier against moisture, dust and dirt, which are inevitable when working in the garden or on a construction site.
- Stable operation over a wide temperature range - meeting and exceeding ISO 6743-9 and DIN 51825 KPF 2K-30 specifications means that the grease maintains the right consistency at both low and high temperatures, resulting in machine reliability throughout the season.
- Reduction of noise and vibration - Well-lubricated gearbox works quieter, generates less vibration, which increases user comfort and reduces fatigue during prolonged work.
- Lower service costs - Regular use of the right lubricant avoids expensive transmission repairs and extends service intervals.
In practice, this means that a home user who mows a plot of land several times a season, as well as a professional who operates a dozen pieces of equipment a day, can count on the same high quality protection of key components. One 125 g tube is sufficient for many maintenance cycles, making the product very economical.
Oleo-Mac lithium grease with molybdenum disulfide - quality, durability and reliability in daily use
Oleo-Mac 125 g 001000677B Angle Gear Lubricant is a product created for users who expect not only basic protection, but above all long-term reliability of their equipment. The combination of a lithium base with the addition of molybdenum disulfide provides:
- Exceptional resistance to high pressures and impact loads - Ideal for gearboxes working under heavy loads, such as when cutting dense weeds, brush or working in hard ground.
- Resistance to leaching - The grease holds well even in wet, rainy conditions or working in wet grass, which is crucial when operating equipment outdoors.
- Long-term stability of the structure - lack of tendency to delamination and hardening of the lubricant translates into long life in the gearbox, reducing the frequency of necessary re-lubrication.
Thanks to these properties, Oleo-Mac grease is great for everyday use:
- During intensive mowing of vast green areas, where the gears of the scythes work almost continuously.
- In the work of high hedge trimming service companies - regular lubrication of cam mechanisms ensures even and clean cutting.
- In earthmoving and fence installation - soil augers lubricated with this product operate more smoothly and are less prone to gear tooth damage.
Technical data and performance characteristics of Oleo-Mac 125 g bevel gear grease
- Brand: Oleo-Mac
- Product type: lubricant for bevel and bevel gears
- Purpose: bevel gears, flexible gears, cam mechanisms, reducers (m.in. petrol scythes, hedge trimmers, soil augers and other gardening/construction equipment)
- Lubricant type: lithium grease with molybdenum disulfide (MoS2)
- Tube capacity: 125 g
- Met and exceeded standards: ISO 6743-9; DIN 51825 KPF 2K-30
- Pre-packaged form: plastic tube for easy dispensing
- Packaging: carton
- Quantity per carton: 24 pcs.
- Manufacturer code / system code: 001000677B
- EAN code: 8026619022969
The use of such carefully selected parameters makes Oleo-Mac grease compatible with the requirements of most manufacturers of professional equipment. The customer receives a product that can be used without concern, both in individual equipment used in the home garden and in a whole fleet of professional machines.
Why choose Oleo-Mac 125 g 001000677B bevel gear grease for your equipment?
By choosing Oleo-Mac 125 g 001000677B bevel gear grease, you are investing in the safety and reliability of your machines. This is the product of a reputable brand specializing in gardening equipment, which is well aware of the demands placed on gearboxes in daily use. The lubricant is formulated to:
- Protect transmission components in the harshest operating conditions - During prolonged mowing, cutting or drilling in hard ground.
- Ensure maximum smooth operation of mechanisms - which translates into operator comfort and better working results.
- Be easy to apply and store - handy 125 g tube will fit in any toolbox or storage compartment in the workshop.
By using original Oleo-Mac grease, you reduce the risk of breakdowns, downtime and costly repairs. This is a solution that pays for itself quickly - both in the household and in the service company.
FAQ - Frequently asked questions about Oleo-Mac 125 g angle gear grease 001000677B
1. How often should Oleo-Mac grease be used in an angular gearbox?
The frequency of lubrication depends on the intensity of use of the device. At home, it is recommended to check the lubricant level at least once a season or after every several hours of operation. For professional use, it is worth doing this more often - for example, every 20-25 hours of machine operation.
2. Can this grease be used on equipment brands other than Oleo-Mac?
Yes, molybdenum disulfide lithium grease with performance exceeding ISO 6743-9 and DIN 51825 KPF 2K-30 can also be used in gears of other manufacturers, as long as the instruction manual allows grease with similar properties. It's always a good idea to check the device manufacturer's recommendations.
3. Is Oleo-Mac 125 g grease only suitable for bevel gears?
Not. In addition to bevel and bevel gears, the lubricant is also designed for flexible gears, cam mechanisms (e.g., in hedge trimmers) and reducers in soil augers and other machines subjected to heavy loads.
4. How to store Oleo-Mac gear grease?
Store the lubricant in the original sealed tube, in a dry place, away from direct sunlight and heat sources. Room temperature is optimal. Such conditions will allow the lubricant to retain its full properties for a long time.
5. Can the product be purchased in larger quantities for the company?
Yes, Oleo-Mac grease is packaged in bulk cartons containing 24 tubes of 125 g each. This is a convenient solution for service shops, gardening companies, equipment rental companies and municipal utilities that operate multiple machines at the same time.
6. Can the use of another, cheaper lubricant replace the Oleo-Mac product?
Although you could theoretically use a grease with similar characteristics, Oleo-Mac's original grease was developed specifically for the brand's gearboxes and meets strict quality standards. The use of inadequate lubricant can lead to increased wear on parts and, in extreme cases, damage to the gearbox.
7. Is Oleo-Mac grease difficult to apply?
Not. 125 g tube allows for easy, precise squeezing of the right amount of grease without the need for additional tools. Simply unscrew the grease plug in the gearbox, introduce grease from the tube and re-tighten the plug.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.