Fiskars X-Series L wood splitter 1079156
- Fiskars X-Series L wood splitter 1079156 is a safe, hand-held device for quickly splitting logs up to Ø 14 cm. Sturdy steel construction, hardened wedge and brush guard provide comfort, control and less fatigue than axe work.
What is the Fiskars X-Series L wood splitter 1079156?
Fiskars X-Series L wood splitter 1079156 is a modern, hand-held device that supports safe and convenient splitting of wood into billets. The design in the form of a stable steel stand with a shielded toothed cutting wedge allows you to prepare firewood for the fireplace, stove, campfire or barbecue without using a traditional axe. The user does not swing the blade - all the work consists of placing the billet in the rack and hitting the wedge of the splitter with a hammer or sledgehammer. This reduces the risk of blade kickback, injury or damage to the environment, while significantly increasing comfort and speed of work. Fiskars X-Series L splitter is designed for wood up to approx. 140 mm, which in practice includes typical fireplace logs, wood for stoves, garden hearths, kettles and grills. It is an ideal solution for owners of single-family houses, recreational plots, farms and all those who want to prepare firewood on their own in a convenient, controlled and as little tiring as possible way.
Where the Fiskars X-Series L 1079156 splitter is mounted and how to use it?
The Fiskars X-Series L 1079156 splitter is designed to work around the home and garden - in the backyard, at the woodshed, in the garage, workshop or under the wood shed. The lower part of the device has a round, stable base with prepared mounting holes so that the splitter can be bolted to the ground (for example, to a thick wooden block, work table, pallet or concrete floor). Such an assembly guarantees maximum stability when working, especially with larger and harder pieces of wood. Practical use:- Choose a level, stable work area - preferably with a paved surface, close to the wood storage area.
- Fasten the splitter to the ground with suitable screws or anchors (matched to the type of ground).
- Place a block of wood vertically in the hole in the top of the device - a special brush guard stabilizes the billet, improving safety.
- Make sure your hands are out of the cutting zone, and then hit the wedge of the splitter with a hammer or mallet - the billet will split into smaller pieces.
- Finished logs can be immediately slid down and collected in the base or in a wood bag set up nearby.
Use of Fiskars X-Series L wood splitter 1079156 in the home and garden
Wood splitter Fiskars X-Series L 1079156 is a device with a very wide range of applications, useful wherever you use wood as fuel or recreational material. With it:- You'll prepare fireplace logs for the living room fireplace - even, repeatable wood size will make it easier to light and stack aesthetically in the fire basket.
- Split logs for eco-pea and wood stoves, wood gasifying boilers, tiled stoves or coal cookers.
- You'll prepare thin kindling sticks for a campfire or garden hearth - just split smaller pieces of wood into several thinner pieces.
- Well-kept wood for your sauna, garden tub, summer house or gazebo will always be on hand in the right sizes.
- Make seasonal wood cleanup easier after cutting branches, tree trunks and branches in the garden - especially if you use a chainsaw or petrol chainsaw.
Key features of the Fiskars X-Series L wood splitter 1079156 - convenience, durability, safety
Fiskars X-Series L 1079156 splitter is distinguished by a number of features that directly translate into convenience of use and real benefits for the customer:- Safe stand design - steel frame with a round base creates a kind of "cage" for the billet. As a result, even with a slightly harder impact, the splintered wood fragments remain within the device, reducing the risk of the user being hit by a splinter.
- Brush guard on top of the splitter - flexible bristles stabilize the billet from above, allowing it to be accurately aligned with the wedge. In practice, this means less tweaking of the setting, faster peeling and more comfort for the less experienced.
- High work efficiency - possibility to split wood with a diameter of up to approx. the 140 mm makes you handle both typical fireplace logs and slightly thicker pieces of wood. The splitter is suitable for deciduous wood (beech, oak, hornbeam, birch) and coniferous wood (spruce, pine), properly seasoned.
- Ergonomics and fatigue reduction - work is done at a comfortable height, and the user does not have to perform extensive, spine-straining sweeps. Hitting a wedge with a hammer is more controlled and less tiring than traditional axe chopping.
- Reliability and quality of the Fiskars brand - the manufacturer is known for its top-of-the-line gardening tools. Sturdy steel construction, refined details and weather-resistant plastics ensure the unit's long life and attractive appearance for many seasons to come.
- Regular preparation of wood for the fireplace in a single-family home - you split a dozen logs every week, saving time and strength.
- Seasonal wood splitting on a recreational plot - before the summer season, you prepare a supply of wood for campfires, garden hearths or barbecues.
- Support the work of a small farm or agritourism business - guests use the garden tub or sauna, and you quickly replenish the wood supply.
Fiskars X-Series L wood splitter 1079156 - specifications and construction
Fiskars X-Series L 1079156 splitter is designed with modern design features that enhance safety and convenience of use. Key Elements:- Size: L - Designed for larger logs; optimum compromise between the compact dimensions of the device and the ability to split wood with a significant diameter (up to approx. 140 mm).
- Steel frame and base - Powder coated, resistant to corrosion and mechanical damage.
- Cutting wedge made of hardened steel - with specially shaped edges that facilitate the initiation of wood cracking and effective splitting.
- Top cover with flexible bristles - Stabilizes the billet, reduces the outward ejection of small pieces of wood.
- Mounting holes in the base - allow permanent bolting of the splitter to the ground, work table or wood block.
- Convenient basket/bag of wood chips (depending on the set) - makes it easy to collect the finished wood and carry it to the woodshed or boiler room.
How the Fiskars X-Series L 1079156 splitter makes woodworking safer?
One of the most important arguments for choosing the Fiskars X-Series L 1079156 splitter is the far greater safety compared to traditional methods of splitting wood:- No sweeping with a sharp axe - user does not work with a fast-moving blade over feet or legs. Energy is transferred by striking a stationary wedge with the hammer, significantly reducing the risk of serious injury.
- Controlled clearing position - the wood is kept upright by a brush guard and surrounding steel frame. Even if the billet is uneven, its movement is restricted to the inside of the unit.
- Reducing chipping - the design concentrates the fragments that break off within the rack, so they do not "shoot" sideways towards the user or other people.
- Safe user position - Hands are above the cutting zone and feet are outside the area of potential splintering. It is enough to maintain basic health and safety rules (protective gloves, work shoes, safety glasses if necessary) to make the work fully comfortable.
Why choose the Fiskars X-Series L 1079156 wood splitter for your home or business?
Investing in a Fiskars X-Series L 1079156 splitter is the way to go:- Save time - you will prepare a supply of wood for the season faster, instead of spending long hours with an axe.
- Force saving - you put less strain on your spine, joints and muscles - work is more ergonomic, rhythmic and less tiring.
- Higher working culture - split wood is in one orderly place, it is easy to maintain order and collect the finished billets.
- Greater mental comfort - the knowledge that you are using a safer, more modern solution than the traditional axe.
- Quality assurance - Fiskars brand is recognized and valued for its durability, ergonomics and years of experience in designing tools for the home and garden.
FAQ - Frequently asked questions about Fiskars X-Series L wood splitter 1079156
1. What is the maximum diameter of wood that the Fiskars X-Series L 1079156 splitter is suitable for??
The splitter is designed to split wood with a diameter of up to approx. 140 mm. This is a range that includes the most common fireplace logs and firewood for stoves, hearths and campfires.
2. Does the splitter need to be permanently bolted to the ground?
To ensure maximum safety and comfort, it is recommended to bolt the splitter to a stable base or a solid block of wood. As a result, the device does not move during impacts, and the splitting is more efficient and predictable.
3. What tool you need to work with the Fiskars X-Series L splitter?
A hammer or sledgehammer of appropriate weight is used to operate the splitter. It is struck with a cutting wedge, not using an axe or other tools with an exposed blade.
4. Is the splitter suitable for any type of wood?
The Fiskars X-Series L splitter can handle most types of firewood - both hardwood (e.g., beech, oak, birch) and softwood (e.g., pine, spruce). The best results are obtained with seasoned wood, with adequate moisture content.
5. Can older or less experienced people use the splitter?
Yes. Compared to traditional axe chopping, working on a splitter requires less physical strength and is much safer. Nonetheless, you should always use basic protective measures (gloves, proper footwear, safety glasses if necessary) and read the instruction manual carefully.
6. Can the splitter be stored outside?
Robust, steel construction with a protective coating is resistant to typical outdoor conditions, but to extend the life of the product it is recommended to store the splitter under a roof (e.g. in a garage, woodshed, shed) or to protect it from direct exposure to rain and snow.
7. Does the splitter require special maintenance?
Maintenance is limited to periodic cleaning from sawdust, checking the condition of bolts and connections and, if necessary, lightly protecting the cutting wedge with an anti-corrosion preparation. When used correctly, the splitter does not require complicated maintenance procedures.
8. For whom the Fiskars X-Series L 1079156 wood splitter is particularly recommended?
It is an ideal choice for homeowners with a fireplace or wood stove, people with summer plots, farmhouses and all users who appreciate the safety, convenience and quality of Fiskars tools.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description