Screator, manual lawn scarifier, metal, head for Fiskars OneClick system
- Screator, manual lawn scarifier - metal head for Fiskars OneClick system. Effectively removes moss and felt, aerates the lawn, improves grass growth. Ideal for small and medium-sized gardens.
Screator, manual lawn scarifier, metal, head for Fiskars OneClick system is a modern, hand-held gardening tool for mechanically aerating and clearing the lawn of moss, felt and dead plant debris. Specially shaped tines mounted on a roller thoroughly cut the turf, improving the access of air, water and nutrients to the grass root system. It's ideal for those who want thick, healthy and intensely green turf without using electricity, fuel or chemicals.
The screator head has been designed for quick installation with the Fiskars OneClick system, an innovative solution that allows one handle to be conveniently combined with multiple interchangeable working tips. This saves space in your garden storage, money for extra tools, and gives you the full convenience of your work.
Fiskars OneClick Screator - what it is and why you should have it in your garden?
Scarifier, hand scarifier for grass, metal, head for Fiskars OneClick system is a specialized tool for scarifying, i.e. controlled cutting and cleaning of turf. The elongated, cylindrical working part is equipped with a series of sharp metal teeth that penetrate the top layer of soil when guided over the lawn. In this way, the screator:
- removes moss, felt and compacted plant debris that impede water and air infiltration,
- improves growth conditions for the root system of grasses,
- stimulates the lawn to thicken and shrub more intensively.
It is a completely mechanical tool - it does not require connection to electricity, use of fuel or servicing like combustion equipment. This makes it quiet, environmentally friendly and ideal for home gardens, ROD plots and recreational areas located adjacent to other homes where noise could be a nuisance. Manual scarifying allows you to work precisely even near flowerbeds, cobblestone edges or at the edges of paths.
In daily use, the screator will perform m.in.:
- during the spring "refreshing" of the lawn after winter,
- when periodically removing moss in shady areas under trees,
- before sowing new grass seed to improve seed-to-soil contact,
- in small gardens where the use of large electric or diesel scarifiers is impractical.
Head for Fiskars OneClick system - quick installation, convenience and space saving
The metal screator is a dedicated head for the Fiskars OneClick system. This means that the tool mounts directly to a compatible shaft with one sure click. The OneClick system is designed to make tip replacement as fast and intuitive as possible - no additional tools, screws or wrenches are needed.
Where the screator is mounted? The head slips onto the Fiskars OneClick system handle and locks into the working position. This method of installation ensures:
- stable connection - no backlash or wobble that could impede accurate work,
- safety of use - the head will not slip off the handle during vigorous driving on the lawn,
- storage convenience - when you're done working, just detach the head and put it back on the shelf; one handle can handle many other gardening tips.
In practice, this means that it's easy to keep your small garden stash organized: instead of several full-sized tools (rake, cultivator, scarifier, hoe, weeder), all you need is one sturdy Fiskars OneClick handle and a set of interchangeable heads. This is especially important in garages, storage cells and small gazebos, where every inch of space is at a premium.
Examples of applications of the OneClick system in daily work:
- in early spring, you install a scarifier and perform lawn scarification,
- when you're done, you unhook the screator in one motion and attach a metal rake to rake up the combed moss,
- in the summer, using the same handle, you mount, for example, a hand cultivator or a narrow weeder for the care of flower beds.
Metal head - durability, precision and effectiveness in removing moss and felt
Screator, manual lawn scarifier, metal, head for Fiskars OneClick system is made of durable metal, which provides high resistance to mechanical damage during operation in demanding garden conditions. The rigid head design reduces bending of the tool, and the sharply pointed teeth effectively penetrate the turf and cut through the compacted felt layer.
Metal roller with densely spaced teeth:
- ensures even cutting of the lawn over the entire working width,
- makes it easier to maintain the direction of work - the tool "guides" itself steadily along the surface,
- allows several passes over the same piece of turf in different directions, which increases the efficiency of the treatment.
For the user, this means tangible benefits:
- less effort - sharp metal teeth themselves "bite" into the turf, so you do not need to over-pressure the tool,
- shorter working time - effective working width allows you to quickly clean even larger sections of lawn,
- durability for years - metal construction, with proper care (cleaning after work, possible protection against corrosion), retains its properties for a long time.
Daily use examples:
- removal of moss in moist, shady corners of the garden, where a layer of green growth often collects,
- cleaning the lawn after intensive mowing, when small grass debris lingers between the blades,
- preparation of the surface before sanding and fertilizing - after scarifying, nutrients reach the roots more easily.
Convenient, ergonomic work with the Fiskars OneClick Creator in small and medium-sized gardens
The Fiskars OneClick System Hand Screatcher is designed with user comfort in mind. Combined with a suitable handle, it provides an ergonomic working position, which is especially important for prolonged use. Thanks to the optimal working width and lightweight head design, it is possible to drive the tool smoothly, without sudden jerks, which significantly reduces hand and back fatigue.
Key user benefits:
- the ability to work in a natural, upright position (depending on the selected handle),
- easy maneuvering between trees, shrubs and garden landscaping elements,
- no wires or cables - complete freedom of movement anywhere in the garden.
Manual scarification with the Fiskars OneClick scarifier will work great:
- in small urban gardens where there is no space to store large machines,
- on summer plots, where electricity is not always available,
- in family gardens, where quiet operation is important - you can take care of the lawn in the early morning or late evening, without disturbing the silence.
Using the scarifier - when and how to use the Fiskars OneClick hand scarifier?
Screator, manual lawn scarifier, metal, head for Fiskars OneClick system is a tool designed for cyclic lawn care. The scarification procedure is usually performed 1-2 times a year, usually in spring (March-April) and optionally in autumn (September-October), depending on the condition of the turf. Thanks to the manual design, you can choose the intensity of work according to the current needs of the lawn.
Primary applications:
- removal of moss and felt from the lawn surface after winter,
- preparing the soil before sowing grass - the cut turf facilitates seed germination,
- improve the permeability of the soil before fertilizing and watering,
- regeneration of the lawn after intensive use (e.g., after the barbecue season, children's games, setting up the pool).
An example of a practical scheme for using the tool:
- Cut the grass with a mower to a slightly lower height than usual.
- Guide the screator in parallel strips across the surface, pressing the head so that the teeth gently cut the turf.
- Make a second pass at right angles to the first pass to increase the effectiveness of the treatment.
- Collect combed moss and plant debris with a rake.
- After the treatment, you can apply lawn fertilizer and carry out grass reseeding where thinning has occurred.
Caring for your lawn in this way will provide your lawn with high resistance to disease, better regeneration after drought, and a much more attractive appearance - dense, lusciously green turf will become a real ornament of your garden.
Quality and reliability - branded skareator compatible with Fiskars OneClick system
When you choose a scarifier, manual lawn scarifier, metal, head for the Fiskars OneClick system, you are investing in a gardening tool with quality workmanship and thoughtful design. Robust materials, refined tine geometry and compatibility with the renowned OneClick system make it a solution for both demanding amateurs and users who regularly and intensively maintain lawns.
The most important advantages from the customer's point of view:
- high durability of metal head construction,
- secure attachment to the system shaft - safety and comfort of use,
- universal application in home gardens, allotments and recreational areas,
- can be combined with other heads as part of the Fiskars OneClick system, which builds a functional, modular tool set.
It's an excellent choice for people who want garden tools to be reliable, ergonomic and have a real impact on the condition of the lawn. Once purchased, the head can last for many seasons, and regular scarification treatments will visibly improve the appearance and health of the turf.
How to take care of a screator - simple maintenance for a long tool life
To ensure that the scarifier, manual lawn scarifier, metal, head for the Fiskars OneClick system retains its properties for a long time, it is worth following a few simple rules of care:
- when you are done, remove any remaining grass, moss and soil from the tines (e.g., with a wire brush or hard plastic brush),
- dry the tool if you worked on wet turf,
- store the head in a dry place, preferably hung or put on a shelf,
- periodically you can protect metal parts with a thin layer of anti-corrosion agent.
Such simple steps will ensure that the head will maintain the sharpness and shape of the teeth, and the tool itself will serve smoothly for many gardening seasons, providing consistently high efficiency of scarifying.
Frequently Asked Questions (FAQ)
1. To which shaft fits the scarifier, hand scarifier for grass, metal, head for Fiskars OneClick system?
The head is designed for use with Fiskars OneClick compatible system handles. When choosing a handle, it's a good idea to choose the right length for your height to ensure a comfortable, upright position while working.
2. How often should you scarify your lawn with this tool?
In most gardens, 1-2 treatments per year are sufficient - in early spring and optionally in autumn. In areas heavily overgrown with moss, you can perform gentle scarification more often, adjusting the intensity to the condition of the turf.
3. Can a handheld scarifier replace an electric or diesel scarifier?
In small and medium-sized gardens - yes. The hand-held version is quieter, lighter, requires no electricity or fuel, yet allows precise control of the depth and intensity of cuts. In very large gardens or commercial areas, mechanical equipment is more common, but a handheld screatcher will still work well for spot and finish work.
4. Is the screator suitable for any type of lawn?
Yes, the tool can be used on most typical home lawns. However, avoid working too aggressively on very young turf - in the case of freshly established lawns, the first gentle scarification is usually done after 1-2 seasons, when the turf is already well rooted.
5. Won't screator work damage the grass?
Properly carried out scarification does not damage the lawn, but regenerates it. Temporarily, the turf may look "combed" or slightly thinned, but within a short time after treatment - especially with fertilization and watering - the grass quickly thickens, becomes stronger and more resilient.
6. How to prepare your lawn with a screatcher?
Before using the scarifier, it is recommended to cut the grass a little lower than usual, remove larger branches and stones, and scarify on dry or slightly damp turf. A substrate that is too wet can tear too much, and one that is too dry can increase resistance during operation.
7. Can the screator also be used on uneven surfaces?
Yes, the hand-held design and cylindrical head allow the tool to be guided over somewhat uneven ground as well. In areas with steeper slopes or depressions, it is advisable to work more carefully, adjusting the pressure and direction of movement to maintain full control over the depth of the cuts.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description