Fiskars X-Series DualAction LX108 two-handed lever scissor shears 1080133
- Fiskars X-Series DualAction LX108 1080133 lever scissor pruner is a professional two-handed bypass tool for cutting branches up to approx. 50 mm. DualAction™ 2-in-1 technology for maximum power, fast, precise cutting and gardening comfort.
Fiskars X-Series DualAction LX108 two-handed lever scissor pruner 1080133 is a professional premium gardening tool designed to quickly and precisely cut even very thick branches. Innovative DualAction™ 2-in-1 technology allows you to switch between maximum power and speed modes, so you can do both heavy corrective cutting and light grooming with one pruner. It's the ideal choice for discerning gardeners, fruit growers and home garden owners who want superior performance, durability and comfort.
As a two-handed pruner, the LX108 does not need to be mounted to any device - it is a stand-alone hand-held cutting tool. The user grabs the ergonomic, elongated arms and, using a lever mechanism, cuts through the branches in a single, sure motion. The secateurs are used directly in the garden: on trees, ornamental shrubs, hedges, vines or in the orchard. Thanks to its long arm reach, it allows comfortable cutting both at height and right on the ground.
What is the Fiskars X-Series DualAction LX108 two-handed lever scissor shears 1080133?
Fiskars X-Series DualAction LX108 two-handed lever shear 1080133 is an advanced bypass (scissor) garden shear that uses a lever mechanism and DualAction™ system to increase cutting efficiency. High-quality steel blade, coated with a special friction-reducing coating, works with the anvil in an extremely smooth manner, leaving a smooth cutting surface with minimal damage to plant tissues.
Thanks to its intelligent design and two modes of operation, the tool will meet the needs of both professional gardeners and amateur users who require tools that are durable, reliable and comfortable. It's a secateurs designed for heavy use over many seasons.
Where the Fiskars X-Series DualAction LX108 pruning shear is used and "mounted."?
Fiskars LX108 lever secateurs is a hand tool that does not require mounting to any machine or additional accessories. You use it directly in your hands - just spread your arms, embrace the branch between the blade and the counter blade and make a squeezing motion of the handles.
Typical application sites:
- at fruit trees in the orchard - for crown screening, renewal and shaping pruning,
- in ornamental gardens - for cutting thicker branches of shrubs, roses, hydrangeas or hedges,
- when cleaning up around the house and on the plot - removing dry, broken branches, preparing kindling wood,
- in green areas of companies, settlements and institutions - for regular care of trees and shrubs.
The pruner does not require any special attachment - you simply store it in the garage, storage room or tool shed and reach for it whenever you need a quick, clean and powerful cut.
Application of the Fiskars X-Series DualAction LX108 lever secateurs
The range of applications for this model is very wide thanks to DualAction™ technology:
- Power mode - For cutting thicker, tougher branches of trees and shrubs when strength and precision are important. Excellent for cutting back old woody stems and correcting over-grown plants.
- Speed mode - For lightning-fast pruning of thinner twigs, young shoots and for daily garden maintenance. Allows you to work at a fast pace without too much effort.
- Care of trees and shrubs - In orchards, ornamental gardens, ROD plots and green spaces.
- Plant formation - Hedges, molded shrubs, ornamental plantings along alleys and driveways.
- Cleaning work - After windstorms, heavy snowfall or in the spring when you remove frozen, broken branches.
Properly designed, lightweight, yet sturdy arms allow you to work for long periods of time without excessive strain on the muscles of the hands, forearms and shoulders. This is especially important for people who make frequent cuts or have sensitive joints.
DualAction™ technology - the heart of the Fiskars X-Series DualAction LX108 two-handed secateurs 1080133
The biggest innovation of the LX108 is the DualAction™ 2-in-1 technology, which allows intuitive switching between two modes of operation:
- Power mode - increases the leverage ratio to make it easier to cut thick branches up to approx. 50 mm. Works well on hard, woody branches where normal shears might "give up".
- Speed mode - shortens the work cycle and allows you to make cuts with greater frequency, ideal for quick crown thinning or pruning young shoots.
Examples of daily use:
- spring clearance of apple, pear or plum trees - the power mode will facilitate the removal of thick, crossing branches,
- summer hedge formation of ligustrum or tui - speed mode will provide dynamic, repeatable cuts,
- autumn cleanup in the garden - removal of dry branches of ornamental trees and reduction of overgrown shrubs.
With DualAction™, you effectively have two tools in one - a heavy-duty pruner and a fast grooming shear, making your work more efficient and reducing the need to buy several different tools.
Ergonomics, comfort and safety at work with the Fiskars LX108 pruning shear
The Fiskars X-Series DualAction LX108 lever scissor shear was built with user convenience in mind. Hardened aluminum construction combined with state-of-the-art FiberComp™ material for both low tool weight and high load and deformation resistance.
Key ergonomic features:
- Long, lightweight arms - make it easier to reach higher branches without having to use a ladder with lower trees and shrubs.
- Handles with non-slip coating - provide a secure grip even with sweaty hands or working with gardening gloves.
- Optimal balancing of the tool - Reduces hand and wrist fatigue during prolonged work.
As a result, the secateurs will work well not only in the hands of strong, experienced gardeners, but also in the hands of older or less advanced people who need a tool to support their muscle strength.
Example situations:
- long Saturday work in the garden - cutting dozens of shrubs without getting too tired,
- care of the family orchard - cyclic pruning of trees for several hours,
- maintaining the greenery around the company or facility - working all day with a changing workforce for whom comfort and safety is critical.
High-quality blade and durable construction of the Fiskars X-Series DualAction LX108 pruning shear
The heart of any secateurs is the blade - the Fiskars LX108 uses high-grade steel coated with a friction-reducing coating. With this, the blade:
- it enters the material more easily, reducing the force needed,
- makes a clean, smooth cut, reducing bark fraying and fiber crushing,
- is better protected against corrosion and wear,
- retains its sharpness for a longer period of time.
Durable construction materials (tempered aluminum, FiberComp™) guarantee resistance to intensive use, as well as to external factors such as moisture and changing temperatures. A well-maintained secateurs will serve for many seasons, which directly translates into savings - you do not have to buy a new tool every year.
Examples of benefits:
- less often do you require sharpening or blade replacement,
- the tool maintains smooth operation even after many thousands of cuts,
- plants regenerate faster due to smooth wound surfaces, which reduces the risk of infection by fungal and bacterial diseases.
Key specifications of Fiskars X-Series DualAction LX108 two-handed secateurs 1080133
- Type of tool: lever secateurs, scissor (bypass), two-handed
- Technology: DualAction™ 2-in-1 - power mode / speed mode
- Maximum cutting diameter: till about. 50 mm*
- Overall length: about. 83.5 cm
- Dimensions: about. 83.5 × 28 × 3.4 cm
- Approximate weight: about. 1.6 kg
- Arm material: tempered aluminum with FiberComp™ elements
- Blade: coated steel - less friction, more corrosion resistance
- Handles: profiled, with anti-slip coating
- Purpose: garden work, orchard work, care of trees and shrubs
- Product code: 1080133
- EAN: 6411501155764
*Actual cutting diameter may depend on wood hardness and working conditions.
Why choose the Fiskars X-Series DualAction LX108 two-handed lever shears 1080133?
By choosing this model, you are investing in a tool that combines:
- Performance - DualAction™ for optimal power on thick branches and speed on thinner stems.
- Comfort - lightweight, balanced design and non-slip handles reduce hand and arm fatigue.
- Cutting precision - coated blade ensures clean wounds, promoting health and rapid healing of plants.
- Durability - high-grade materials and careful workmanship guarantee a long tool life.
- Versatility - One tool for most pruning tasks in the garden and orchard.
It is the ideal choice for those who value ergonomics, professional quality and real facilitation of work in the garden. Fiskars X-Series DualAction LX108 Secateurs will make even demanding cuts fast, comfortable and satisfying.
FAQ - Frequently asked questions about Fiskars X-Series DualAction LX108 two-handed secateurs 1080133
1. For what thickness of branches is the Fiskars LX108 pruning shear suitable?
The pruner is designed to cut thick branches - under favorable conditions it will handle wood up to about. 50 mm. With very hard, dry wood, it is advisable to make cuts in stages or select slightly thinner branches so as not to overload the tool.
2. Does the LX108 pruning shear require mounting to another device?
Not. This is a fully self-contained, two-handed hand pruner. Just grab it by the handles and start working - no extra attachments or power required.
3. For what work is it best to use DualAction™ technology?
You'll use the power mode for cutting old, tough tree and shrub branches, while the speed mode will work well for regular maintenance, cutting young shoots and shaping shrubs or hedges. This allows you to handle a wide range of garden work with one tool.
4. Is the secateurs suitable for older or less experienced people?
Yes. Lightweight design, long arms and lever mechanism significantly reduce the force required for cutting. In addition, non-slip handles increase the safety of use. This is a good solution for anyone looking for a tool to make work easier, regardless of age.
5. How to take care of pruning shears so that they serve for many years?
After each operation, it is a good idea to remove residual juices and dirt from the blade, and then dry the tool. From time to time, the cutting mechanism and moving points can be lightly oiled. Store the secateurs in a dry place, away from moisture. Periodic checking of sharpness and possible sharpening of the blade will further extend its life.
6. Can the blade be replaced?
Replacement parts are available for the LX108 in case of blade wear or damage. As a result, you don't need to replace the entire tool - you just need to replace the cutting element, which is an economical and ecological solution.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description