LEFT-HAND KNIFE 520MM FOR COMFORT SERIES TRACTOR OM102R TS000113R
- Left blade 520mm TS000113R for COMFORT OM102R tractor - original hardened cutting blade with high durability. Guarantees even, clean mowing, perfect balance, safe installation and perfect lawn appearance.
Left-hand knife 520 mm for COMFORT OM102R series tractor TS000113R is a high-quality cutting element designed for COMFORT OM102R series lawnmower-tractors. Ensures precise grass cutting, high durability and safe operation even under heavy use. Carefully selected dimensions and spacing of mounting holes guarantee a perfect fit for dedicated tractor models, which translates into even mowing and long life of the entire cutting system.
What is the left-hand knife 520 mm TS000113R?
This is the original left-hand cutting blade with a length of 520 mm, used in the mowing units of COMFORT OM102R series tractors. It is responsible for cutting and ejecting the grass, and its specially shaped tips further improve air circulation, making it easier to collect the swath into a basket or spread it evenly on the lawn.
Where the left-hand knife 520 mm for the COMFORT OM102R series tractor is mounted?
The blade is mounted in the mowing unit of the garden tractor, on the left side (viewed from the operator's position). It is attached to the hub with a central hole and side holes, which ensure a secure and stable screwing. Correct installation of the left-hand blade is crucial to balance the entire cutting system and to maintain safety while mowing.
Application of left-hand knife 520 mm TS000113R
The knife is designed for:
- tractor-towers series COMFORT OM102R,
- mowing large home lawns, recreational areas and allotments,
- care of green areas around homes, businesses, resorts or residential communities,
- work in standard lawn conditions, both with frequent mowing and with slightly taller grass.
Full technical description of the product:
- length: 520 mm,
- width: 55 mm,
- Ø center hole: 20 mm,
- Ø side hole: 8.5 mm,
- distance between holes: 65 mm,
- purpose: for COMFORT OM102R series tractor,
- system code / designation: TS000113R,
- type: lEFT Knife for mower unit.
Highest cutting quality - left blade 520 mm for COMFORT OM102R TS000113R tractor
The 520mm left-hand blade for the COMFORT OM102R TS000113R tractor is designed to provide a clean, even and repeatable cutting at each pass. Adequate length of 520 mm and width of 55 mm guarantee optimum coverage of the working belt, while allowing precise work near flowerbeds, trees or lawn edges.
Three key features of cutting quality:
- Precision profiled cutting edge - Ensures thorough cutting of the blades instead of tearing them out, which reduces yellowing of the grass and accelerates its recovery. In practice, this means that after mowing, the lawn looks fresh and healthy, without frayed ends.
- Stability of operation in tall grass - thanks to the appropriate angle of the blade tips and its rigid design, the cutting element can also cope with grass that has been mowed late. It is ideal, for example, after returning from vacation, when the grass has grown back strongly.
- Even ejection or grass collection - special curves of the blade tips create a strong air movement, which makes it easier to transport the cut grass to the basket or spread it evenly over the surface. This is especially important when mowing larger areas, where you want an aesthetically pleasing finish in one pass.
Examples of daily use:
- regular weekly mowing of the backyard lawn of 1000-2000 m²,
- care of green areas around the summer house, where the grass grows a little more luxuriantly and is mowed less often,
- maintenance of representative lawns in front of the company headquarters or office - aesthetic, even cutting improves the image of the surroundings.
Durability, safety and reliability of the TS000113R left-hand knife in daily operation
When you choose the 520 mm TS000113R left-hand blade for the COMFORT OM102R tractor, you are investing in a a durable, resistant and safe cutting element, which was developed for long-term use in demanding garden conditions. Durable material and precise workmanship minimize the risk of cracking and deformation, which is crucial for the safety of the operator and those around him while the tractor is in operation.
Three main aspects of sustainability and safety:
- Robust material with increased abrasion resistance - the knife is made of hardened steel, which maintains the appropriate hardness of the blade while resisting the impact of small stones or twigs. This way you don't have to replace the knife every season - with proper use it will last a long time.
- Precise balancing - proper blade balance reduces vibrations transmitted to the mower deck and the entire tractor. Less vibration is not only more comfortable, but also less wear and tear on bearings, drive belts or fasteners.
- Secure mounting design - 20 mm center hole diameter and two 8.5 mm side holes spaced 65 mm apart ensure secure attachment to the hub. This reduces the risk of the knife coming loose during operation, which is crucial for user safety.
Examples of practical use:
- mowing areas with individual small stones, pinecones or dry twigs - the knife stands up well to typical daily garden loads,
- many hours of mowing larger areas, such as areas of housing communities or single-family house estates - without worrying about rapid dulling or deformation of the blade,
- intensive use during the season from spring to autumn with minimal downtime for service.
Perfect fit and easy installation of the 520mm left blade for the COMFORT OM102R series tractor
The 520 mm left-hand blade TS000113R has been specially designed for cOMFORT OM102R series tractors, making its installation quick and hassle-free, and the fit - perfect. This means less time spent in the garage servicing and more time spent effectively mowing the lawn.
Three key advantages of fit and assembly:
- Precise installation dimensions - The central hole of 20 mm and the side holes of 8.5 mm with a spacing of 65 mm perfectly fit the hub of the mower deck on COMFORT OM102R series models. This eliminates the need for alterations or matching components.
- Easy replacement of a worn blade - with the use of basic tools (socket wrench, blade lock) the replacement can be done independently in a short time. This is a convenient solution for users who value self-service of their equipment.
- Compatibility with original and branded replacements - the right size standard makes the blade compatible with factory tractor attachments and popular mounting systems, making it easy for ongoing maintenance and possible future replacements.
Examples of daily use:
- replacing the blade after the mowing season in the home garden to prepare the tractor for another year of work,
- quickly replace a damaged or warped blade after contact with a larger obstacle - without the need for a service visit,
- modernization and improvement of the cutting quality of the older COMFORT OM102R tractor by replacing the worn-out blade with a new one TS000113R.
User benefits - why choose the left-hand knife 520mm TS000113R for COMFORT OM102R?
The purchase of a 520 mm left-hand blade for the COMFORT OM102R TS000113R series tractor is an investment in convenience, time saving and professional mowing result. A properly selected, balanced and durable blade significantly improves working comfort and reduces the operating costs of the entire machine.
Three key user benefits:
- Saving time - thanks to even cutting and efficient collection of grass into the basket, you will cut the same area faster and with fewer passes. This is especially important for large garden areas.
- Aesthetic appearance of the lawn - sharp, well-chosen blade guarantees uniform grass height and eliminates the effect of uneven clumps or "ragged" spots. Lawn looks neat after just one mowing.
- Reduced service costs - less vibration, better balance and robust blade design have a positive effect on the life of bearings, V-belts and aggregate components. You'll visit the service center less often, and the tractor will run trouble-free longer.
Examples of situations in which you will appreciate this product:
- when you are preparing your garden for an important family gathering, barbecue or outdoor celebration and you want your lawn to look perfect,
- when you do mowing regularly, even several times a week, and the tractor must always be ready for work,
- if you run a gardening or landscaping business and need reliable, repeatable mowing results from your customers.
Technical specifications of the left-hand knife 520mm for the COMFORT OM102R tractor
Collected below are the most important technical data of the left-hand knife 520 mm TS000113R, relevant to the selection and replacement of parts:
- Overall length: 520 mm - provides a wide working belt and fast mowing of larger areas.
- Width: 55 mm - optimum compromise between durability and cutting efficiency.
- Center hole: Ø 20 mm - main attachment point to the aggregate hub.
- Side openings: Ø 8.5 mm - auxiliary holes to stabilize the knife mounting.
- Spacing of side openings: 65 mm - matched to the COMFORT OM102R tractor mounting system.
- Knife type: left - designed to work on the left side of the mower deck.
- Purpose: cOMFORT Series garden tractor OM102R.
- Product code / symbol: TS000113R.
Correct selection of a blade with the indicated parameters is essential to maintain the factory performance of the tractor, avoid unnecessary vibration and ensure even operation of both blades in the unit (left and right).
FAQ - Frequently asked questions about the 520mm left blade for the COMFORT OM102R TS000113R tractor
1. Will this blade fit my COMFORT OM102R tractor?
Yes, the left blade 520 mm TS000113R is designed for COMFORT OM102R series tractors. Before buying, however, it is worth making sure that the currently installed knife has the same dimensions (length 520 mm, central hole 20 mm, side hole 8.5 mm, spacing 65 mm).
2. Do I need to replace both knives at the same time?
It is recommended to replace both knives in the aggregate (left and right) at the same time. This will ensure that you maintain the correct balance of the cutting system and an even quality of cut on both sides of the mower.
3. How often should the knife be sharpened or replaced?
Frequency depends on the intensity of use and operating conditions. Under typical garden conditions, it is a good idea to inspect the knife every ten or so hours of operation. When the edge is visibly dulled, chipped, or the knife has been warped after hitting an obstacle - sharpen it or replace it with a new one, while keeping it balanced.
4. Can I install this knife myself?
Yes, with the right tools and safety precautions (disconnecting the ignition, locking the knife, using the right wrench) most users are able to replace the knife themselves. When in doubt, it's a good idea to get help from the service.
5. How do I know if a knife is suitable for replacement?
Symptoms of knife wear are m.in.: frayed grass tips after mowing, noticeable vibration of the tractor, noisier operation of the mower deck, visible chipping or cracks on the cutting edge. In this case, replace the blade with a new one for safety and better mowing results.
6. Is the knife factory balanced?
Yes, the left-hand knife 520 mm TS000113R is factory balanced. However, after any sharpening, its balance should be rechecked to avoid excessive vibration during tractor operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.