RIGHT 460MM COLLECTOR BLADE WITH INCREASED CAPACITY FOR OM92/92S SERIES TRACTOR SGS532050422863R
- Right 460 mm collector blade with increased capacity for OM92/92S tractor SGS532050422863R. Hardened steel, precise cutting, strong grass suction and perfect fit for the cutting unit.
RIGHT 460MM COLLECTING BLADE WITH INCREASED CAPACITY FOR OM92/92S SERIES TRACTOR SGS532050422863R - PROFESSIONAL CUTTING AND MAXIMUM GRASS COLLECTION
Right 460 mm collector blade with increased capacity for OM92/92S series tractor SGS532050422863R is a high-quality working element designed for tractor mowers, ensuring precise mowing and effective collection of grass into the trash garbage can. Thanks to its properly contoured geometry and reinforced design, it guarantees an even cut, optimal airflow under the cutting unit and reliability even in intensive seasonal use.
What is the 460mm right-hand collector blade with increased capacity for OM92/92S tractor?
The 460mm right-handed enhanced-capacity collecting knife for OM92/92S series tractor SGS532050422863R is an original-fit, right-handed cutting and collecting knife for use on garden tractors equipped with a unit with a working width adjusted to a length of 460mm. Its task is to simultaneously cut the grass and produce a strong airflow that directs the swath into the ejection channel and on to the basket.
The design of the blade combines a sharp cutting edge with a characteristic curve of the tips (blades), which are responsible for the "turbine" effect - so that the grass does not remain on the turf, but is effectively sucked up and transported. It is ideal for users who care about a perfectly clean, presentable lawn at their home, residence, business or recreational areas.
Where the right 460mm collecting blade for OM92/92S series tractor SGS532050422863R is installed?
The presented blade is designed for installation in OM92/92S series garden tractors. This is a right-hand blade, so it is installed on the right side of the cutting unit (viewed from the position of the operator sitting on the tractor). It works together with the left-hand knife appropriately selected for the model, creating a cutting set with a large working width.
Attachment of the blade is carried out on the shaft of the cutting unit using a screw in the central hole and additional stabilizing points in the form of a side hole. Thanks to the factory-matched mounting hole dimensions and spacing, installation is fast, precise and requires no modifications. Proper blade mounting ensures safe operation, minimizes vibration and extends the life of bearings and the entire cutting mechanism.
Application of 460mm right-hand blade for OM92/92S tractor - mows like professional municipal equipment
The 460mm right-hand pick-up blade with increased capacity is designed for intensive maintenance work on home, estate and corporate lawns. It works well wherever high quality cutting and maximum swath collection are required:
- regular mowing of lawns around the house and garden,
- maintenance of large, level green areas at companies and industrial halls,
- care of playing fields, recreational areas, allotment gardens,
- mowing of areas with moderate and dense grass, with priority on thorough collection into the basket.
Thanks to the increased collection capacity, the cutter allows you to reduce the number of passes, reducing working time and fuel consumption. In practice, this means that the owner of an OM92/92S tractor can mow large areas faster and more efficiently without having to make frequent passes over the same sections of lawn.
OM92/92S SGS532050422863R right-hand knife - key features that you will feel in your daily work
This model of blade was developed for users who expect professional quality mowing in home and semi-professional conditions. The most important features that realistically affect the comfort and efficiency of work are:
- High precision cutting - a blade with the right angle of attack ensures even trimming of blades, which translates into an aesthetic, "carpet-like" lawn effect. Ideal for regular mowing of representative green spaces.
- Improved collection efficiency - specially profiled blade tips produce a powerful air stream that effectively transports the cut grass to the garbage can. Great for mowing after rain (but on dry grass) and on lawns with more biomass.
- Stable and quiet operation of the unit - properly balanced blade reduces vibration, reducing noise and stress on bearings and gears. This translates into greater operator comfort and longer tractor life.
In practical applications, such as Saturday garden mowing, preparing the area before a family party or regular lawn cleaning at the company, the user will immediately feel the difference: the grass is evenly cut and the basket fills efficiently without having to drive over the same lanes repeatedly.
Durability, reliability and safety of use 460mm blade for OM92/92S tractor
The 460mm right-hand picker blade is made of wear-resistant, hardened steel, which guarantees long blade life, resistance to the impact of small pebbles or twigs, and maintenance of performance for many seasons. Robust construction and appropriate thickness of the material allow to maintain the rigidity of the knife, minimizing its deformation during operation.
Safety of use is ensured by:
- properly sized mounting holes - The central and side holes guarantee a secure fit of the knife on the hub,
- factory balancing - Reduces the risk of excessive vibrations that could lead to mechanical damage,
- high abrasion resistance - Reduces the frequency of knife replacement, which reduces the risks arising from frequent disassembly and assembly.
With typical use - weekly mowing during the season - the knife will last for many seasons, with basic maintenance, such as periodic sharpening, checking balance and checking attachment.
Precise fit and quick installation - saving time and money
Thanks to the precise fit for OM92/92S series tractors, the presented knife is an ideal replacement for the worn-out factory component. Appropriate dimensions and hole spacing make knife replacement efficient, without the need for additional adapters or reworking of the attachment. This is important for both individual users and gardening companies, for whom minimizing equipment downtime is important.
In everyday use, this means:
- the possibility of replacing the blade yourself in a home garage or workshop,
- shorter tractor service time,
- confidence that the knife is properly seated, which affects the safety of work.
Technical data of right 460mm collector knife - OM92/92S SGS532050422863R
Below is a summary of the product's key technical parameters:
- Product type: right-hand collecting knife with increased capacity
- Overall length: 460 mm
- Width: 79 mm
- Center hole diameter: Ø 16 mm
- Side hole diameter: Ø 6 mm
- Distance between holes: 75 mm
- Purpose: oM92/92S series tractors
- Product code / system code: SGS532050422863R
- Function: cutting and intensive collection of grass into the basket
These parameters guarantee full compatibility with the cutting unit of OM92/92S tractors, which is crucial for maintaining the quality of mowing, safety and durability of the entire cutting system.
How the 460mm OM92/92S right-hand blade makes everyday mowing more comfortable?
The use of a blade with increased collection capacity has a direct impact on the comfort and convenience of the tractor. An owner who regularly mows, for example, a 1500-3000 sq. ft. plot will quickly notice:
- less often has to improve the same parts of the lawn - The grass is effectively cut and harvested on the first pass,
- saves time - Shorter mowing time means more free time for relaxation or other garden work,
- achieves a better aesthetic effect - no clumps of grass left behind and an even mowing height make the garden look neat and professional.
The knife will work especially well for users who:
- they mow lawns at regular intervals,
- they care about picking up the swath accurately (for example, with children playing on the grass),
- expect reliable operation of the tractor during the season without frequent service interruptions.
Maintenance and operation - how to take care of the 460mm right-hand knife for the OM92/92S tractor?
To get the most out of your knife and maximize its life, it's a good idea to follow a few simple rules:
- Regular cleaning - after finishing work, it is good to remove residual grass and soil from the surface of the blade, which prevents corrosion and the deposition of compacted plant matter.
- Periodic sharpening - depending on the intensity of use, it is recommended to sharpen the knife at least once a season (with very intensive use - more often). Blunt knife jerks grass, leaving frayed ends of blades.
- Balance control - after sharpening, check the balance of the blade; its absence leads to excessive vibration and accelerated wear of the aggregate bearings.
- Checking the attachment - Regular tightening of bolts according to the recommended torque avoids backlash and increases operational safety.
With proper care, the OM92/92S SGS532050422863R right 460mm collecting blade will retain its cutting and collecting properties for a long time, and the lawn will always look fresh and professional.
FAQ - Frequently asked questions about the 460mm right blade for OM92/92S tractor SGS532050422863R
Question 1: Will this knife fit my OM92/92S tractor?
The blade was designed specifically for OM92/92S series tractors. Before you buy, it's a good idea to compare the blade length (460 mm), width (79 mm) and the diameters and spacing of the mounting holes (Ø 16 mm central, Ø 6 mm lateral, distance between holes 75 mm) with the factory data or your old blade to make sure full compatibility.
Question 2: What is the difference between a gathering knife and a regular cutting knife?
The collecting knife has specially shaped tips (blades) that create a strong air stream under the aggregate. This actively lifts the cut grass and directs it into the ejection channel and into the basket. A regular cutter blade places more emphasis on cutting itself and less on intensive swath collection.
Question 3: How often should the blade in the tractor be replaced?
Frequency of replacement depends on the intensity of use and operating conditions. With typical home use (1 time per week per season) a well-maintained knife can last for several seasons. However, it should be sharpened regularly and inspected for more serious mechanical damage, such as cracks or excessive chipping - in such cases, the knife must be replaced immediately.
Question 4: Can I replace the blade in the OM92/92S tractor myself?
Yes, replacing the blade can be done yourself, provided basic safety rules are followed. Before starting work, turn off the engine, disconnect the spark plug wire, and secure the tractor against accidental starting. Then you unscrew the bolt holding the old knife, remove it, install the new one, keeping in mind the mounting direction, and tighten the bolts to the proper torque. If you are inexperienced, it is worthwhile to take help from the service.
Question 5: Can the knife be sharpened repeatedly?
Yes, the knife can be sharpened repeatedly, as long as its structure is not seriously damaged and the thickness of the material remains sufficient for safe operation. After each sharpening, check the balance of the knife. When you notice cracks, deep cavities or significant material abrasion, replace the knife with a new one.
Question 6: Is this blade suitable for mulching?
The featured cutter is designed primarily as a collection cutter with increased capacity, i.e. for basket and ejection work, rather than as a typical mulching cutter. It can partially shred grass, but its main function is to effectively collect the swath. For intensive mulching it is recommended to use dedicated blades with a different geometry.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.