RIGHT BLADE 460 MM FOR OM92/92S SERIES TRACTOR SGS532050422843
- Right-hand 460 mm blade for OM92/92S tractor SGS532050422843 - durable, perfectly matched cutting blade. Guarantees clean, even grass cutting, less strain on the engine and hassle-free installation. Ideal for large lawns.
RIGHT BLADE 460 MM FOR OM92/92S SERIES TRACTOR SGS532050422843 - PROFESSIONAL BLADE FOR PRECISION GRASS CUTTING
The 460mm right-hand blade for OM92/92S series tractor SGS532050422843 is a high-quality, heavy-duty working blade designed for lawnmowers-tractors. It is responsible for efficient cutting and even shredding of grass, ensuring a perfectly mowed lawn in large areas. Robust design and refined dimensions make it a reliable part of the cutting system, which significantly affects the comfort and efficiency of work.
length: 460 mm, width: 79 mm, Ø center hole 16 mm, Ø side hole 6 mm, distance between holes 75 mm; for OM92/92S series tractor
The component is designed to work in demanding conditions where durability, safety and quality of cutting matter. Replacing the blade with a new model with the right parameters, such as the shown 460 mm right blade, restores the full performance of the tractor and guarantees an even, aesthetic turf without frayed blades of grass.
What is the 460 mm right blade for OM92/92S series tractor SGS532050422843?
This is a specialized right-hand cutting blade designed for OM92/92S series garden tractors. "Right" indicates the direction of operation and blade installation in the cutting unit. The knife rotates in a specific direction and works together with the second (left) knife to form a complete cutting system. The use of a suitable, dedicated blade guarantees safe operation of the device and optimal mowing results.
Where does the 460 mm right-hand knife for the OM92/92S tractor mount??
The blade is mounted on the shaft of the cutting unit of the garden tractor OM92/92S series - in the right position, according to the manufacturer's design. The Ø 16 mm central hole is used to seat the blade on the hub, and the Ø 6 mm side hole, 75 mm away from the central hole, allows for additional stable mounting or the use of wedges/blocks depending on the design of the unit. Thanks to the precise matching of dimensions, the installation is simple and the operation of the knife - stable even at high speeds.
Application of right-hand knife 460 mm OM92/92S:
The 460mm right-hand blade has been designed for intensive use in garden tractors operating:
- large home lawns,
- green areas at companies and institutions,
- playgrounds, campgrounds, campsites,
- recreational areas and parks.
Replacing a worn or damaged blade with a new blade significantly improves the quality of mowing, reduces the load on the engine and reduces the risk of damage to the cutting unit.
Precise fit of the 460 mm OM92/92S right-hand knife - a guarantee of trouble-free installation
One of the most important features of the presented blade is its perfect fit for OM92/92S series tractors. Precisely defined parameters - length 460 mm, width 79 mm, central hole Ø 16 mm and side hole Ø 6 mm at a distance of 75 mm - make the knife work with the original cutting unit without any modifications or adjustments. This is a huge benefit to the user, who can replace the blade quickly and seamlessly.
Such precise dimensions mean, first of all:
- Occupational safety - Properly balanced and matched blade minimizes vibration and loads transmitted to the shaft and bearings.
- Cutting stability - the correct length and width guarantee an even working range of the blade, so that no uncut strips are left on the lawn.
- Saving time - simple installation eliminates the need for multiple adjustments and fitting.
In everyday use, this means that the garden owner can simply remove the worn blade, attach the new 460 mm OM92/92S right-hand blade, check the tightness of the bolts and get right back to mowing. For greenkeeping companies, quick replacement of blades reduces downtime and allows timely completion of orders.
High cutting quality and aesthetics of the lawn with 460 mm right-hand blade for OM92/92S series tractor
A well-sharpened and properly designed cutting blade is the key to a beautiful, healthy lawn. The presented 460 mm right-hand blade for the OM92/92S tractor is designed to provide a clean, even cut, without tugging the blades of grass. This quality of work reduces the risk of drying and yellowing of the tips, and the turf regains its density and intense color.
The benefits of using this knife for daily mowing:
- Uniform lawn height - ideal for representative gardens, home gardens and recreational gardens.
- Less strain on the engine - a sharp, properly shaped blade requires less power to cut, resulting in lower fuel or energy consumption.
- Better grass collection and ejection - the design of the blade promotes efficient transport of the swath into the basket or backwards/ sideways depending on the tractor configuration.
In practice, the user will notice that after replacing the blade, the lawn is mowed faster, more evenly and requires less frequent touch-ups. This is especially important on large acreages, where each additional trip of the tractor means additional time and fuel consumption.
Durability, resilience and reliability of 460 mm right-hand knife SGS532050422843
The right-hand 460 mm blade for the OM92/92S series tractor SGS532050422843 is made of durable material resistant to mechanical stresses typical of field work. While mowing, the blade may come into contact with sand, small stones or twigs - that's why it's so important that the blade maintains rigidity and strength even during heavy use.
The most important design advantages from the perspective of sustainability:
- Robust knife profile - properly formed section increases resistance to bending and impact.
- Stable mounting - well-chosen diameters of mounting holes protect against clearances that could lead to cracks or damage.
- Possibility of multiple sharpening - with proper use, the knife can be sharpened, extending its life and maintaining high quality of cutting.
For the individual user, this means less frequency of blade replacement, and therefore real savings in the long term. In turn, companies using tractors for professional maintenance of green spaces can count on stable operation of the equipment throughout the season, without unexpected downtime due to blade damage.
Safe and simple operation of the OM92/92S right-hand tractor blade in daily use
The replacement and operation of the 460mm right-hand knife on OM92/92S series tractors has been made as simple as possible. Thanks to the matching mounting holes and standard blade length, the user is assured that the knife will work safely and stably after correct mounting. It is crucial to follow health and safety rules - disconnect the ignition, protect the tractor from accidental starting and use the right tools.
Daily application examples:
- Regular lawn mowing on private property - quick replacement of the blade before the season avoids problems during the first work.
- Intensive use in a service company - easy disassembly and assembly facilitates periodic sharpening and checking of blade condition.
- Work in recreational areas - thanks to the reliability of the blade, it is possible to schedule mowing at regular intervals without worrying about sudden blade failure.
Proper operation, regular cleaning and periodic check of the blade balance will allow you to use the blade to its full potential and significantly extend the life of the entire cutting system of the tractor.
Technical data of the 460 mm right blade for the OM92/92S series tractor SGS532050422843
- Overall blade length: 460 mm
- Knife width: 79 mm
- Center hole diameter: Ø 16 mm
- Side hole diameter: Ø 6 mm
- Distance between the center hole and the side hole: 75 mm
- Intended use: oM92/92S series tractor
- Type: right-hand blade (right-hand blade, for the right side of the cutting unit)
- External code / symbol: SGS532050422843
Application in practice - who will benefit the most from the 460 mm OM92/92S right-hand knife?
The presented knife is an ideal choice for:
- owners of OM92/92S series garden tractors who want to restore the full performance of the machine,
- gardening and municipal companies, taking care of large green spaces,
- managers of estates, resorts, hotels and boarding houses, where a representative lawn is a showcase of the facility.
Investing in a new, well-fitted cutting blade translates directly into comfort and safety, as well as the professional appearance of mowed grass surfaces.
FAQ - Frequently asked questions about the 460 mm right-hand knife for the OM92/92S series tractor
1. Will this knife fit my OM92/92S tractor?
Yes, the blade was designed specifically for OM92/92S series tractors. Before buying, however, it is worth comparing the dimensions of the old knife (length 460 mm, width 79 mm, diameter of the central hole 16 mm and side hole 6 mm, distance 75 mm between the holes) with the technical data to ensure compatibility.
2. Is it a right or left-handed knife?
It is right-hand knife, designed to be mounted on the right side of the cutting unit on the OM92/92S series tractor. When replacing a set of blades, it is recommended to use the appropriate right and left blades according to the manufacturer's specifications.
3. How often should you replace the blade in the tractor?
Frequency of replacement depends on the intensity of use and operating conditions. With regular mowing and periodic sharpening of the blade, it is usually sufficient to replace it every few seasons. If you notice cracks, chipped edges, severe bending, or balance problems, the knife should be replaced immediately.
4. Can the knife be sharpened?
Yes, the 460 mm right-hand knife for OM92/92S can be sharpened, making sure to maintain the correct angle of the cutting edge and evenly remove the material on both sides. After sharpening, it is recommended to check the balance of the knife to avoid vibration during operation.
5. How to install a right-hand knife in a tractor?
Before starting work, turn off the engine completely, disconnect the ignition and protect the tractor from accidental starting. Then remove the old knife, clean the mounting surface, seat the new knife on the Ø 16 mm center hole, fit the Ø 6 mm side hole and tighten the screws according to the manufacturer's recommendations. After installation, it is a good idea to rotate the cutting unit by hand to ensure that the blade rotates freely.
6. Is this blade suitable for mulching?
The blade can work with a tractor equipped with a mulching function, if the design of the unit allows it. However, for specialized mulching, dedicated mulching blades are often used - it is worth checking the tractor manufacturer's recommendations before choosing a solution.
7. What to do if the knife hits a stone while mowing?
In the event of a severe impact, stop work immediately, turn off the tractor and check the condition of the blade. If chipping, cracking or significant bending is visible, the blade should be replaced with a new one. Continued operation with a damaged knife can be dangerous for the user and risk serious damage to the cutting unit.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.