LEFT KNIFE 460 MM FOR TRACTOR OM92/92S SERIES SGS532050422833
- Left knife 460 mm for OM92/92S tractor SGS532050422833 - high-quality cutting knife for garden tractors. Provides precise, even mowing, long life, less vibration and safe operation. Ideal for heavy use.
Left blade 460 mm for OM92/92S series tractor SGS532050422833 is a high-quality working element designed for professional and home garden tractors. It is designed for precise cutting, long life and reliable operation in variable terrain conditions. Thanks to carefully selected dimensions and mounting holes, it works perfectly with the mowing unit of OM92/92S series tractors, ensuring even lawn mowing over the entire working width.
length: 460 mm, width: 79 mm, Ø center hole 16 mm, Ø side hole 6 mm, distance between holes 75 mm; for OM92/92S series tractor
Left knife 460 mm for OM92/92S tractor - what it is and why it is so important?
Left blade 460 mm for OM92/92S series tractor SGS532050422833 is a specialized steel cutting element installed in the mowing unit of a garden tractor. Its task is to precise cutting of blades of grass, shredding them and ensuring an even lawn appearance. As a left-hand knife, it cooperates with the right-hand knife (in two-knife sets) to form a complete cutting system with a large working width.
Thanks to the appropriate profiling and proper weight distribution, the knife provides stable operation without excessive vibrations, which translates into operator comfort and protection of tractor components. The user gains not only a perfectly mowed lawn, but also lower wear and tear on the drive and bearings in the aggregate.
This is an operational component that directly affects the quality of mowing, safety and productivity. A blunted, deformed, or mismatched blade can cause fraying grass, overloading the engine, or even damaging the unit. Therefore, the use of a dedicated knife with the right parameters is crucial for trouble-free operation of the OM92/92S series tractor.
Where the 460 mm OM92/92S left-hand knife is mounted and how it works in the mower deck?
Left-hand 460 mm blade for OM92/92S tractor is mounted in the mower unit (cutting unit) under the tractor frame. It is bolted to the knife hub with a bolt passing through the central mounting hole with a diameter of 16 mm. The 6mm side hole and precise 75mm hole spacing ensure that the blade is properly seated and fixed relative to the hub, which translates into safe and stable operation.
As a left-hand knife, this element usually rotates counterclockwise (as seen from the underside of the unit), working with the right-hand knife on the opposite side of the. This arrangement provides full coverage of the mowing width, and the contoured blade tips generate a jet of air that lifts the grass before it is cut. This ensures that each blade is cut evenly and the lawn gets an aesthetically pleasing, professional appearance.
In practice, the assembly is as follows:
- the tractor is placed on level, stable ground,
- the mowing unit is lowered and properly secured,
- the old left-hand knife is disassembled,
- a new 460 mm OM92/92S left-hand knife is installed in its place,
- the balance and attachment of the knife is checked.
Correct installation ensures that the knife will not introduce vibrations, and the tractor will maintain full operating culture even when mowing extensive areas for long periods of time.
Use of the 460mm left-hand blade OM92/92S - the ideal choice for intensive mowing of gardens and properties
The left-hand 460 mm blade for the OM92/92S series tractor SGS532050422833 is designed for use in:
- home gardens of medium and large area,
- recreational areas around the summer houses,
- grass fields, playgrounds and neighborhood areas,
- company properties and areas around service facilities.
The excellent performance of the blade - 460 mm long and 79 mm wide - allows you to efficient mowing of wide strips of grass, which significantly reduces working time. The knife will work well both during regular, frequent mowing, as well as when embracing slightly taller grass after a long break.
Examples of daily applications:
- mowing the extensive lawn around the single-family house 1-2 times a week during the season,
- maintaining a well-kept area next to a company, hotel or guesthouse, where the aesthetics of the lawn are of image importance,
- care of recreational areas at summer houses and recreational plots,
- mowing of the field or playground in smaller sports centers or residential communities.
Key features of the 460mm left-hand blade for OM92/92S tractor SGS532050422833 and user benefits
1. Precise technical dimensions
With a length of 460 mm and a width of 79 mm, it provides an optimal working width while guaranteeing a safe distance from the aggregate housing. This prevents the knife from rubbing against guard components, causing excessive vibration and exposing the operator to additional repair costs.
2. Mounting holes to match OM92/92S series
The diameter of the central hole 16 mm, the side hole 6 mm and the distance between the holes 75 mm make the blade perfectly compatible with original OM92/92S tractor hubs. The user gains confidence that:
- the knife will be stably fixed,
- no backlash or misalignment will occur during operation,
- aggregate will retain full factory parameters.
3. Solid workmanship and high durability
The knife is made of high quality steel, which after appropriate heat treatment is characterized by high hardness and resistance to abrasion. In practice, this means:
- longer time to retain a sharp cutting edge,
- lower sharpening frequency,
- higher resistance to impact with small stones or twigs.
For the user, this translates into lower operating costs and less downtime during the season.
4. High quality cutting and aesthetics of the lawn
Sharp, properly shaped left-hand knife 460 mm:
- cleanly cuts the blades of grass instead of tugging them,
- reduces the risk of yellowing of grass tips,
- ensures an even cutting height across the entire width of the unit.
Regular mowing with this blade allows you to achieve the effect of dense, healthy and uniform greenery, comparable to professional turf care.
5. Comfort and safety at work
The well-balanced blade minimizes vibrations transmitted to the entire tractor, which:
- increases operator comfort during prolonged mowing,
- reduces the load on bearings, gearboxes and the aggregate drive,
- reduces the risk of mechanical damage.
The use of an efficient, sharp knife is also important for the user safety - A damaged or unbalanced blade can break or lead to damage to other parts of the cutting system.
How to take care of the left 460 mm blade for the OM92/92S series tractor to serve as long as possible?
To maximize the life of left-hand knife 460 mm OM92/92S, it is worth following a few simple operating rules:
- Regular sharpening - check the condition of the cutting edge every few mowings, especially after contact with stones or hard obstacles. Dull blade results in higher engine loads and poorer cut quality.
- Periodic balance check - always check the balance of the knife after sharpening. Uneven collection of material can lead to vibration and accelerated wear of components.
- Cleaning after mowing - remove grass and soil debris from the blade surface and from under the aggregate. This prevents corrosion and improves airflow during operation.
- Safe installation - always use the right screws and tighten them to the right torque, according to the tractor manufacturer's instructions.
Following these rules will not only ensure longer blade life, but also better use of the tractor's power, lower fuel consumption and fewer breakdowns during the busy mowing season.
Technical specifications - left-hand knife 460 mm for OM92/92S tractor SGS532050422833
- Purpose: left knife for garden tractor OM92/92S series
- Overall length: 460 mm
- Width: 79 mm
- Center hole diameter: 16 mm
- Side hole diameter: 6 mm
- Distance between holes: 75 mm
- Assembly side: left (in a two-legged system)
- Application: grass cutting in home, recreational and utility areas
FAQ - Frequently asked questions about the 460 mm left-hand blade for the OM92/92S series tractor
Question 1: Does this blade fit all OM92/92S series tractors?
Yes, the 460 mm left-hand blade SGS532050422833 was designed for OM92/92S series tractors. The key features are: length 460 mm, width 79 mm and hole diameters and spacing (16 mm, 6 mm, 75 mm). Before buying, however, it is a good idea to compare the dimensions with the currently mounted knife.
Question 2: Can I use only one knife if there are two in the aggregate?
In two-knife units it is recommended to always replace both knives at the same time. This ensures even cutting, proper balance of the unit and less stress on components. Using an old blade on one side and a new one on the other can cause vibration and poorer mowing quality.
Question 3: How often should I replace the blade on the tractor?
Frequency of replacement depends on the intensity of use and operating conditions. For standard domestic use, it is usually sufficient to replacement every 1-2 seasons. If mowed surfaces are contaminated with rocks or sand, the blade may need to be replaced or sharpened more often.
Question 4: Is it possible to sharpen the knife yourself?
Yes, you can sharpen the knife yourself, using the right tools (grinder, file) and safety rules. The following must be maintained factory sharpening angle and after the procedure check the balance of the knife. If you're inexperienced, it's a good idea to have your sharpening done by a service center.
Question 5: What happens if I use a knife with different dimensions than the original one?
Using a knife with the wrong length or different hole spacing can lead to dangerous situations: rubbing against the housing, strong vibrations, damage to the hubs or even breakage of the blade. Therefore, it is always advisable to use components that are sized according to the tractor manufacturer's specifications.
Question 6: Is this blade suitable for mulching grass?
The 460 mm left-hand blade OM92/92S is designed primarily for classic mowing and grass throwing (into the garbage can or aside). In many cases, it can work with mulching kits, but it ultimately depends on the design of the specific mowing unit. If in doubt, it's worth checking the tractor manufacturer's recommendations.
Question 7: How to store a knife in the off-season?
After the season is over, it is a good idea to thoroughly clean the knife from the remains of grass and soil, check its technical condition and lightly protect the surface with a thin layer of oil or anti-corrosion preparation. Store the knife in a dry place, away from moisture.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.