RIGHT-HAND 620 MM COLLECTOR BLADE WITH INCREASED CAPACITY FOR OM124J/124JH SERIES TRACTOR SGS532050422673
- Right-hand 620 mm collector blade with increased capacity for Oleo-Mac/Efco OM124J/124JH tractors. Hardened steel, precise balance, perfect fit and fast basket filling - professional mowing of large lawns.
The 620mm right-hand collector blade with increased capacity for OM124J/124JH series tractor SGS532050422673 is a high-performance cutting bar designed for Oleo-Mac and Efco garden tractors. Designed as a working element of the mowing system, it guarantees efficient mowing, effective grass collection in the basket and long, trouble-free operation. Thanks to its precise dimensions and reinforced construction, it is an ideal choice for both private users and companies that professionally maintain green spaces.
What is the right 620 mm collecting knife for OM124J/124JH tractor SGS532050422673?
Right 620 mm collecting blade with increased capacity is a hardened steel cutting bar mounted on the right side of the garden tractor mower deck (viewed from the operator's position). Its specially shaped tips and appropriately shaped center section create a powerful airstream during rotation:
- lifts grass blades in front of the blade, ensuring an even and clean cut across the entire working width,
- effectively transports grass clippings to the ejection channel or basket, increasing collection efficiency,
- reduces the risk of clogging the ejection tunnel when the grass is taller or damp.
This element works in tandem with the left blade to form a set responsible for the full width of mowing. The model on offer is an enhanced-capacity pick-up knife, which means its geometry has been optimized for faster mowing of larger areas while maintaining high quality of cut and efficient filling of the hopper.
Where the right-hand knife 620 mm for the OM124J/124JH series tractor is mounted?
The 620 mm right blade is mounted in the cutting unit (deck) of the OM124J/124JH series garden tractor, on the right side, looking in the direction of travel. It is designed to work with a 122-cm-wide cutting unit with two opposite knives - a right and a left one.
Thanks to the precisely selected dimensions of the mounting holes and their spacing, the knife fits perfectly into the knife hub, maintaining the correct balance of the entire cutting system. Correct installation guarantees:
- stable operation without excessive vibration,
- less stress on bearings and drive belts,
- safe operation of the tractor even when mowing for long periods of time.
In practice, installation comes down to the removal of the old blade, cleaning the hub of dirt and corrosion tarnish, and then attaching the new blade, observing the direction of operation and the appropriate tightening torque of the mounting screw. This is a quick service operation that many users perform themselves in their own garage.
Application of the right-hand 620 mm collector blade - to which tractors it fits?
The offered blade is designed for OM124J/124JH series garden tractors and related Oleo-Mac and Efco models equipped with 122 cm wide cutting deck and trash ejection. Its length and hole spacing correspond to the factory parameters used in these designs, allowing the product to be considered a high-quality replacement for the original blade.
Typical applications include:
- regular mowing of home gardens ranging from 1,000 to several thousand square meters,
- maintenance of green areas at companies, guesthouses, farms and recreational facilities in perfect condition,
- care of playing fields, areas of housing communities or neighborhood parks, where high quality cutting and fast work is important.
Thanks to its efficient grass collection function, the blade is ideal for places where it is undesirable to leave a swath - for example, on representative lawns in front of office buildings, hotels, restaurants or single-family houses.
Key features and advantages of the 620 mm right-hand knife SGS532050422673
Right-hand 620 mm collecting blade with increased capacity is distinguished by technical parameters adapted to intensive work in difficult garden conditions. Its most salient features are:
- Overall length: 620 mm - provides a large working width, thus reducing the time needed to mow large areas.
- Width: 55 mm - optimal combination of rigidity and low weight for stable operation and fast rotation.
- Center hole diameter: 16 mm - matched to the hub standard used on OM124J/124JH series tractors.
- Side hole diameter: 6 mm - allows you to securely and safely fix the knife.
- Distance between holes: 75 mm - in accordance with the factory dimensions of the aggregate, which ensures perfect adhesion of the blade to the attachment.
- High-quality, hardened steel: increased resistance to abrasion and impact against stones, twigs or small terrain obstacles.
- Gathering profile with increased efficiency: special "shovel" shape intensively sucks in and throws out the grass, maximizing the filling of the basket.
In daily use, this translates into tangible benefits: the lawn looks even, without clumps or "burn-through" after a single pass, and the garbage can fills quickly and evenly, reducing the number of necessary passes and stops for emptying.
Quality workmanship - durability, safety and comfort
The 620mm right-hand collector knife is made of high-quality, hardened steel, so it retains its sharpness and shape even during intensive use. Properly selected material thickness and heat treatment process minimize the risk of deformation, cracking or chipping.
Care has also been taken to ensure that the knife is precisely balanced. This means:
- lower vibration levels transmitted to the tractor frame and steering wheel,
- less wear and tear on bearings, belts and the entire cutting unit,
- higher operator comfort during prolonged mowing.
For the user, this means not only saving time and money on service, but also greater safety - a stable blade reduces the risk of damage to the cutting mechanism and uncontrolled vibration.
Daily uses of the 620 mm right-hand knife in practice
The 620mm right-hand pick-up blade with increased capacity will work well in many scenarios of garden tractor use:
- Mowing the home garden: ideal for regular lawn care around the house - allows you to quickly mow a large area without multiple passes.
- Maintenance of areas around businesses and commercial facilities: provides an aesthetic appearance of greenery in front of offices, stores, warehouses or restaurants, which positively affects the image of the company.
- Servicing recreational areas: will prove useful on plots of land, on farms, at cottages and in recreational areas where comfort and convenience are of key importance.
Thanks to the intensive grass collection function, the blade also performs well during periods of rapid grass growth (spring, early summer), reducing the need for frequent raking and additional cleanup work.
Why choose a right-hand knife 620 mm collector SGS532050422673?
When you choose this knife model, you get a product designed specifically for OM124J/124JH series tractors that combines:
- full compatibility with cutting unit - matching dimensions and mounting holes,
- high durability thanks to the use of hardened steel and robust construction,
- increased collection efficiency grass into the basket - a special collecting profile,
- working comfort resulting from low vibration and even balance,
- aesthetics of mowing - even, clean cut without fraying the tips of the blades.
It's the ideal choice for people who want their garden tractor to be reliable and work at a high quality for many seasons, while at the same time they want to reduce the amount of time spent on garden maintenance work.
Technical data - right-hand 620 mm collecting blade for OM124J/124JH tractor
| Overall length | 620 mm |
| Knife width | 55 mm |
| Central hole diameter | 16 mm |
| Side opening diameter | 6 mm |
| Distance between holes | 75 mm |
| Destination | Tractors OM124J/124JH series, aggregate ok. 122 cm, basket throw |
| Knife type | Right-hand, collecting, with increased capacity |
| External system code | SGS532050422673 |
FAQ - Frequently asked questions about the 620mm right-hand knife for the OM124J/124JH tractor
1. Does this blade fit my Oleo-Mac OM124J/124JH tractor?
Yes, the 620 mm right-hand collector blade with increased capacity has been designed for OM124J/124JH series tractors with a cutting deck width of about 122 cm. Before buying, it is additionally worth comparing the length of the old blade and the diameters and spacing of the mounting holes.
2. Do I always have to replace a set of blades, or can I just replace the right one?
It is recommended to replace both blades (right and left) at the same time in order to maintain an even balance of the cutting system and identical cutting quality on both sides of the unit. Replacing just one badly worn blade can cause a difference in cutting height and increased vibration.
3. How often should you replace the blade in the tractor?
Frequency of replacement depends on the intensity of use and operating conditions. When typically mowing the garden 1-2 times a week, it is recommended to check the condition of the blade at least once a season. When the cutting surface is dull, badly chipped or deformed, the blade should be replaced with a new one - this affects the quality of the cut, safety and the load on the drive.
4. Is this blade suitable for mulching?
It is primarily a collection blade with increased capacity, designed to efficiently transport grass to the basket. On many tractors, it can also operate in non-binned mowing mode, spreading the swath behind the machine. However, the full mulching function (shredding hard and leaving the grass on the lawn) depends on the design of the unit and the plugs used - if in doubt, check the tractor manual.
5. How to take care of a new knife to make it last as long as possible?
After each mowing, it's a good idea to clean the blade of grass and soil debris, reducing the risk of corrosion. Avoid driving over rocks, steel elements or thick roots. If the cutting edge becomes dull, it can be sharpened carefully, making sure to keep the knife balanced. When cracks, deep chipping or pronounced deformation appear, it is imperative to replace the blade with a new one.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.