RIGHT BLADE 470MM FOR CHEYENNE/23/26/GOLIATH SERIES TRACTOR AGGREGATE 132CM SGS532050422143
- Right blade 470 mm for CHEYENNE/23/26/GOLIATH tractor, 132 cm aggregate (SGS532050422143) - Durable hardened steel blade, perfectly balanced for even, precise lawn mowing and less vibration.
Right blade 470 mm for CHEYENNE/23/26/GOLIATH series tractor aggregate 132 cm SGS532050422143 is a high-quality, heavy-duty working blade designed for lawn mowers-tractors in the garden. Properly selected length and spacing of mounting holes guarantee a perfect fit for the 132 cm wide cutting unit, which translates into even mowing, less vibration and longer life of the entire cutting system.
What is RIGHT KNIFE 470MM FOR CHEYENNE/23/23/26/GOLIATH SERIES TREATER AGREGATE 132CM SGS532050422143?
This is a brand new, right-hand cutting blade for a lawn mower-tractor, made of hard, wear-resistant steel. It is designed to work in tough garden and municipal conditions, providing a clean, aesthetically pleasing lawn cut and reliability for daily use. The right direction of the blade makes it perfectly compatible with the cutting system and grass ejection system of the CHEYENNE 23/26 series and GOLIATH series tractors with 132 cm aggregate.
Where the 470 mm CHEYENNE/23/26/GOLIATH right-hand knife is mounted?
The blade is mounted in the 132 cm wide cutting unit of CHEYENNE/23/26/GOLIATH series garden tractors. It is bolted to the knife hub with screws passing through the central and side mounting holes. Correct installation combined with blade balancing allows the entire machine to operate safely and efficiently.
Application of 470 mm blade for CHEYENNE/GOLIATH tractor
The blade is designed for regular and intensive mowing of home, estate, sports lawns and green areas in companies and institutions. It is ideal for both low and slightly taller grass mowing, and its geometry makes it easy to lift the blades and cut them evenly across the entire width of the unit.
Technical parameters (according to the manufacturer):
- overall length: 470 mm
- width: 60 mm
- center hole diameter: Ø 10 mm
- side hole diameter: Ø 8 mm
- distance between holes: 75 mm
- purpose: for CHEYENNE/23/26/GOLIATH series tractor, 132 cm aggregate
- type: right-hand knife
- product code: SGS532050422143
Manufacturer's description:
length: 470 mm, width: 60 mm, Ø central hole 10 mm, Ø side hole 8 mm, distance between holes 75 mm; for tractor series CHEYENNE/23/26/GOLIATH AGREGATE 132CM.
Exceptional cutting precision - 470 mm right-hand blade for CHEYENNE/23/26/GOLIATH tractor
The 470mm right-hand blade is designed to provide maximum even and clean mowing of the entire working surface of the aggregate 132 cm. Precision-shaped cutting edge minimizes fraying of grass blades, making the lawn look healthy, dense and uniform after mowing.
Examples of daily use:
- Home gardeners get even strips of grass without unsightly tufts and "ragged" ends.
- Settlement administrators can quickly and efficiently mow large areas between blocks, maintaining a high aesthetic standard of common areas.
- Service companies engaged in green care will benefit from reliable cutting quality, which translates into customer satisfaction and a positive corporate image.
CHEYENNE/23/26/GOLIATH right-hand knife 470 mm - durability that reduces operating costs
The blade is made of high-grade steel, resistant to abrasion, microcracks and impact of small obstacles (stones, branches). As a result, the knife retains its geometry and sharpness much longer than cheaper replacements. The lower frequency of blade replacement and sharpening directly translates into lower maintenance costs of the tractor and save time.
Three key user benefits:
- Longer blade life - Less frequent knife replacement, less service expenses.
- Safe operation of the aggregate - More stable rotation and reduced risk of damage to the hub, belts or bearings.
- Consistent mowing quality - even after many hours of work, the knife maintains good sharpness, which has a positive effect on the condition of the lawn.
In practice, this means that the owner of a private garden can mow the grass all season long without a noticeable drop in the quality of the cut, the field manager will maintain an even turf surface, and the utility contractor will reduce downtime and unexpected repairs.
Perfect fit for the 132 cm aggregate - safety and comfort at work
Precise dimensions of the knife - length 470 mm, width 60 mm, central hole Ø 10 mm, side hole Ø 8 mm, distance between holes 75 mm - guarantee its proper seating in the 132 cm aggregate of CHEYENNE/23/26/GOLIATH tractors. This fit eliminates excessive backlash and vibration, which could lead to damage to transmission components and reduce operator comfort.
In everyday use, this means:
- Less vibration on the steering wheel - More comfortable, less tiring work, especially when mowing large areas for long periods of time.
- Lower noise levels - Better comfort for the operator and those near the tractor's work area.
- Higher security - Stably attached blade reduces the risk of it coming loose or being damaged when working in dense grass.
Example: owner of extensive property mows lawn for 2-3 hours. Thanks to the right-balanced 470mm right-hand knife, work is smooth without unpleasant vibrations, keeping you focused and comfortable longer.
Professional application of the 470 mm right-hand blade in CHEYENNE/23/26/GOLIATH 132 cm tractors
The 470 mm right-hand knife is used in both private applications, as well as professional. It can work daily in the service company as well as occasionally in the home garden, always providing high mowing performance.
Three typical usage scenarios:
- Backyard lawn care - Quick mowing around the house, paths, decorative plantings; the blade can handle dense grass and slightly uneven terrain.
- Operation of recreational areas - Playing fields, playgrounds, areas around holiday homes or hotels; the aesthetic appearance of the lawn affects the perception of the entire facility.
- Municipal works - Maintenance of urban greenery: green belts, parks, squares; the durability of the blade in intensive use minimizes machine downtime.
Thanks to its robust design and refined geometry, the knife also performs well in more demanding conditions: on slightly damp grass, with little leaves or small twigs on the turf.
Easy replacement and maintenance - saving time for the user
With standard hole dimensions and 75 mm spacing, knife replacement is quick and uncomplicated. In most cases, all you need to do is lift the tractor (or unit), lock the blade rotation and unscrew the mounting bolt. Then a new knife is installed, paying attention to its correct positioning (cutting side and right direction marking).
Benefits of simple installation:
- Self replacement - the user does not have to use the service each time, which saves time and money.
- Reduce downtime - quick replacement of a worn blade allows you to continue mowing virtually immediately.
- Easy inspection of technical condition - easily remove the knife to sharpen, clean or balance it.
In practice, the owner of the equipment can schedule a pre-season inspection: dismantle the blade, sharpen it, check the condition of the cutting surface and the holes, and then easily install it back - without having to leave the tractor for several days at the service center.
FAQ - Frequently asked questions about 470mm CHEYENNE/23/26/GOLIATH 132 cm right-hand knife
1. Does this blade fit all CHEYENNE/23/26/GOLIATH tractors?
The blade was designed specifically for cHEYENNE/23/26/GOLIATH series tractors equipped with a 132 cm wide cutting deck. Before you buy, it's a good idea to compare the dimensions of your old knife (length, width, hole diameters, and the distance between them) with the specifications given in the description.
2. Is it a right or left-handed knife?
The model presented is right-hand knife. This means that it works on the right side of the aggregate (viewed from the operator's position) and has a geometry adapted to such a direction of rotation. When replacing, make sure you buy the right (right or left) blade for your tractor.
3. How often should you replace the blade in the tractor?
Frequency of replacement depends on the intensity of use and operating conditions. For typical household use, it is recommended to inspection and possible sharpening of the blade at least once a season, and replacement - when the blade is excessively worn, crooked or cracks appear. In professional work, it is advisable to perform inspections more often.
4. Can the knife be sharpened repeatedly?
Yes, the knife can be repeatedly sharpened, provided that its correct geometry and balance are maintained. Do not remove too much material from one side of the blade. After several sharpening cycles, when the working length of the knife is visibly shortened or cracks appear, it is recommended to replace it with a new one.
5. How to take care of a knife to make it last as long as possible?
After you finish mowing, it's a good idea to remove any leftover grass, soil and small twigs from the blade. Store the tractor in a dry place to reduce the risk of corrosion. Regular sharpening and balancing of the blade, as well as avoiding driving into stones, curbs or hard obstacles significantly extends the life of the blade.
6. Can I replace the blade myself without voiding the tractor warranty?
In most cases replacing the working blade yourself is acceptable, as long as it is performed in accordance with the machine manufacturer's operating instructions. However, you should always read the warranty provisions of your specific tractor model to make sure that self-service is allowed.
7. Does this blade work with the side ejection and garbage can collection system?
Yes, the design of the 470mm right-hand blade is suitable for standard 132cm units with side or rear ejection, and, depending on the configuration of the tractor, also with a grass catcher. Proper air circulation and grass uplift facilitate efficient collection of mowed material.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.