480MM BLADE FOR NG504 SERIES MOWER R300228
- Blade 480mm for NG504 series mower R300228 - durable, balanced blade with grass lifting blades. Hardened steel, thickness 4 mm, central hole 18 mm, side holes 8.5 mm (65 mm spacing). Ideal for NG504 and compatible mowers.
The 480mm blade for the NG504 R300228 series lawn mower is a high-quality cutting blade for garden mowers, designed for maximum durability, cutting efficiency and safety in use. Thanks to its clever design with blades, it not only ensures even grass cutting, but also effective grass lifting and ejection or collection into a basket, which translates into an aesthetically pleasing lawn after each mowing.
length: 480 mm, width: 56mm, thickness; 4 mm, Ø central hole 18 mm, Ø side hole 8.5 mm, distance between holes 65 mm; with blades
What is the 480mm blade for the NG504 R300228 series mower and why you should choose it?
BLADE 480MM FOR NG504 SERIES MOWER R300228 is the working element of the mower responsible for the proper cutting of grass and its flow under the housing of the machine. It is made of durable, hardened steel, resistant to abrasion and impact with small stones or twigs, which significantly extends its service life. Standard length of 480 mm allows for efficient mowing of medium and larger lawn areas while maintaining high cutting precision.
Thanks to the presence of blades at both ends, the blade acts not only as a blade, but also as a rotor - it produces a strong airflow that lifts the blades of grass before cutting, and then transports them to the basket or tosses them aside. This solution keeps the grass trimmed evenly, without jagged ends, which promotes healthy growth and reduces yellowing of the tips.
The blade is factory-balanced to minimize vibrations transmitted to the mower shaft, housing and operator handle. Reduced vibration significantly improves working comfort and reduces wear and tear on other components of the machine, such as bearings and motor mounts.
Where does the 480mm blade for the NG504 R300228 series mower mount and what equipment it works with??
The R300228 blade is mounted on the working shaft of the mower, directly under the cutting housing. This is a spare part designed primarily for NG504 series mowers, but thanks to the standard dimensions of the holes it can also be used in other models whose design corresponds to the specified technical parameters. The key mounting dimensions are:
- total blade length: 480 mm,
- blade width: 56 mm,
- material thickness: 4 mm,
- center hole diameter: 18 mm,
- diameter of side holes: 8.5 mm,
- distance between side openings: 65 mm,
- design with blades floating grass.
Installation of the blade is simple, but it requires compliance with safety rules: before starting work, disconnect the power supply to the mower (in the case of combustion equipment - remove the pipe from the spark plug, in electric - unplug the plug from the socket). The blade is screwed with the central screw and additional side screws (if provided for the model), using the existing mounting holes with a diameter of 18 mm and 8.5 mm.
The 480mm blade for the NG504 series mower R300228 will be ideal for mowers used for grooming:
- home gardens,
- recreational areas next to summer cottages,
- small green areas at companies, schools or institutions,
- allotment gardens and neighborhood squares.
Use of NG504 R300228 mower blade in daily lawn care
The 480MM blade for NG504 series mower R300228 is designed for multi-season, heavy-duty use. Its solid thickness of 4 mm provides high resistance to deformation, so that the knife retains the correct shape and balance for a long time. Integrated blades improve air circulation under the lawnmower housing, thereby improving grass collection in the trash or more efficient dumping to the side.
Practical applications include:
- Regular mowing of well-maintained lawns - thanks to even cutting you get perfectly smooth turf without "clumps" and unevenness.
- Trimming taller grass after a period of intensive growth - Robust blade copes with denser and taller vegetation, gradually restoring the lawn to the desired level.
- Maintenance of areas around the house and company buildings - Aesthetic appearance of greenery improves the perception of the entire property by visitors and customers.
Thanks to its appropriately sized and bladed design, the knife ensures effective work even in more difficult conditions, such as slightly damp grass or terrain with slight unevenness. Sharp cutting edges reduce drag during mowing, which can have a beneficial effect on engine load and fuel or electricity consumption.
Blade 480mm for NG504 series mower R300228 - durability, safety and comfort of use
One of the key advantages of the R300228 knife is its high durability. Thickness of 4 mm and properly selected material provide resistance to:
- intensive use over large areas,
- occasional blows against small obstacles (stones, cones, twigs),
- wear and tear caused by frequent sharpening.
From the point of view of user safety, it is equally important to balance the blade correctly. Reduced vibration means not only comfort at work, but also less risk of damage to fasteners or knife breakage due to material fatigue. Properly attached and tightened blade with proper operation ensures stable and safe operation of the mower.
Examples of situations in which the user will appreciate the quality and reliability of this knife:
- Regular maintenance of the family garden - without the need to frequently replace the blade or straighten it after accidentally driving over a bump.
- Maintenance of the allotment garden - When the mower is used several times a week during the season, and the tool must reliably perform its function.
- Maintenance of areas around companies and institutional headquarters - where repeatable, professional mowing results and equipment reliability counts.
Technical parameters of the 480mm blade for NG504 series mower R300228
| Overall length | 480 mm |
| Width | 56 mm |
| Thickness | 4 mm |
| Central hole diameter | 18 mm |
| Diameter of side openings | 8.5 mm |
| Distance between holes | 65 mm |
| Design | Knife with grass lifting blades |
| Destination | NG504 series mowers and compatible models |
| Product code | R300228 |
| EAN code | 3582323700081 |
FAQ - Frequently asked questions about the 480mm blade for the NG504 R300228 series mower
Question 1: Will this blade fit my mower?
The 480mm R300228 blade is primarily designed for NG504 series mowers. It can also fit other models, provided that the length of the blade, the diameter of the central hole (18 mm), the diameter of the side holes (8.5 mm) and the distance between them (65 mm) are compatible. Before you buy, compare these dimensions with the original blade or documentation of your mower.
Question 2: How often should you replace the blade on your lawn mower??
Frequency of replacement depends on the intensity of use and operating conditions. For standard household use, it is recommended to check the condition of the blade at least once a season. If the blade is severely dulled, crooked or cracked, it is necessary to replace it. Regular sharpening and attention to balance can extend the life of the knife.
Question 3: Is it possible to sharpen the knife yourself?
Yes, you can sharpen the knife yourself, but it should be done with safety and attention to the balance of the blade. After sharpening, it's a good idea to check the balance of the blade to avoid excessive vibration during mower operation. If you have no experience, it is recommended that you use the service.
Question 4: How to safely replace the blade on a lawn mower?
Before replacing the blade, disconnect the power supply to the mower - on internal combustion models, remove the pipe from the spark plug, and on electric models, remove the plug from the outlet. Position the mower so that you have easy access to the blade, block the rotation of the shaft (for example, with a wooden block), and then remove the mounting screws. Install the new 480mm blade R300228, paying attention to the correct installation direction (the blades must lift the grass upwards), then tighten the screws firmly according to the recommendations of the manufacturer of the device.
Question 5: What are the benefits of using a blade knife?
The blade with blades not only cuts the grass, but also generates an air stream that lifts the blades before cutting and then transports them toward the basket or side ejection. This results in more accurate mowing, evenly cut grass and more efficient swath collection. The end result is an aesthetically pleasing, well-maintained lawn that looks professional after every pass with the mower.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.